The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes. In the package you will find a USB-C USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter. The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 480Mbps, USB 5Gbps, USB 20Gbps, USB4 and Thunderbolt 3/4. Device support: 2.5" SSDs/HDDs, 3.5" HDDs, SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD), SATA III - 6 Gb/s (600 MB/s) interface, max. disk capacity - all without limit. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the SATA interface used (theor. 6 Gbit/s). Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Connection via USB 3.2 Gen 2 type C female connector. Cable USB type C male / USB type C male 60 cm long and reduction USB type C female / USB type A male included in the package. Adapter dimensions 14 x 72 x 29 mm (H x W x D). Adapter weight 19 g (without cable, without disk, without adapter). Power supply: Power supply via USB bus up to 900mA from one USB port is sufficient for 2.5" HDD/SSD. To power the adapter with a 3.5" drive, a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long cable is included. AC adapter dimensions 65 x 65 x 40 mm (including fork). Weight of AC adapter 102 g (incl. power cord). Package contains: USB-C 10 Gbps - SATA adapter, cable USB-C USB-C 60 cm + USB-C -> USB-A reduction, AC adapter 100-240V / 12V-2A
The AXAGON ADSA-CC CLONE MASTER 2 universal USB-C 10Gbps adapter connects up to two drives to your computer quickly and easily at the same time. Easily connect any 2.5" or 3.5" drive directly to the adapter's external SATA connector. Simply insert the NVMe M.2 drive into the adapter body without the use of a screwdriver or other tools. You can also connect a SATA M.2 drive to the adapter using an external adapter such as the AXAGON RSS-M2SD. In the package you will find a USB-C USB-C cable with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Thanks to the cloning function without the need to connect to a PC, the adapter can be used as a stand-alone device for convenient duplication and disk imaging. The cloning direction is adjustable via a switch, so you can easily choose whether to clone the contents of an NVMe M.2 drive to a SATA drive or vice versa. After all the data is copied, the target disk is an exact copy of the original disk. This is the easiest way to transfer the contents of one drive to another, including a working operating system (Windows, macOS, Linux ...). In addition to the fast USB 10Gbps interface, the adapter also supports all important functions for working seamlessly with different types of drives, such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected M.2 and 2.5" drives only from the USB port. In case of connecting a 3.5" drive, the included power adapter is of course already required. These features make the CLONE MASTER 2 adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal helper for backup, migration, data transfer and storage, testing and cloning discs, etc. Input: USB 10Gbps (USB 3.2 Gen 2). Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. M.2 slot device support: NVMe (PCI-Express) M.2 SSD one-sided and double-sided drives. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Supports M-KEY & B+M-KEY NVMe M.2 SSD disks. No capacity limitation. Support for devices connected to the SATA port: SATA 2.5"/3.5" SSD/HDD. SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD. No capacity limitation. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning direction switch - from NVMe M.2 drive to SATA drive or from SATA drive to NVME M.2 drive. SSD cloning speed up to 500 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0) and USB 480Mbps (USB 2.0). Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. The total adapter bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8.1 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Support for booting from disks connected to the adapter. HDD Auto Spindown - automatic spinning down when they idle for 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Full Plug and Play support. Connection via USB-C female connector. Cable USB-C male USB-C male 30 cm length + USB-C -> USB-A reducer included. Adapter dimensions 102 x 68 x 15 mm. Adapter weight 73 g (without accessories). Power: USB Bus Power - for M.2 and 2.5" drives, power via the USB bus is sufficient. Self Power - for 3.5" drives, power is required using the included external AC/DC adapter 12V - 2A with a 150 cm cable. Power switch. LED indication: the green LED indicates that the adapter is powered on (permanent light). 2x orange LED indicates connection for each of the disks (permanent light) and data transmission (blinking). 4x blue LED indicates cloning process 25% -50% -75% -100% (blinking), resp. cloning completion (permanent light). Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: M.2 + 2.5"/3.5" SSD/HDD adapter, power adapter 100-240V / 12V-2A, 4 thermal conductive pads, USB-C USB-C cable 30 cm long + USB-C -> USB-A reduction, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
LG QNED82 AI ühendab dünaamilise värvitehnoloogia, tehisintellekti toel töötava pilditöötluse ja ümbritseva ruumilise heli. Teleri õhuke disain sobib igasse interjööri, pakkudes nutikat ja kaasahaaravat vaatamiskogemust. • Dynamic QNED Color tehnoloogia • α7 AI Gen8 protsessor ja 4K Super Upscaling • Täpne lokaalhämarus ja ümbritsev 9.1.2 virtuaalheli • AI Magic Remote ja webOS Re:New uuendused
LG QNED82 AI ühendab dünaamilise värvitehnoloogia, tehisintellekti toel töötava pilditöötluse ja ümbritseva ruumilise heli. Teleri õhuke disain sobib igasse interjööri, pakkudes nutikat ja kaasahaaravat vaatamiskogemust. • Dynamic QNED Color tehnoloogia • α7 AI Gen8 protsessor ja 4K Super Upscaling • Täpne lokaalhämarus ja ümbritsev 9.1.2 virtuaalheli • AI Magic Remote ja webOS Re:New uuendused
Tootekood: MODERN 15 F1MG-643NLGTIN: 4711377347655Sülearvutid
Elevate your business experience with the sleek and ultraportable Modern 15 F1M. Its ultra thin and light design is featured with up to an Intel Core 7 processor. With a long-lasting battery and a full complement of I/O ports, whether you are in the office, commuting or traveling, you will enjoy all-day power and productivity.
TOSHIBA MG10ADA10TE Capacity-Optimized Data Center Storage Systems Harness the raw power of our cutting-edge MG10-D Series hard drive, delivering increased performance and power efficiency than prior models. The industry standard 7200 rpm 3.5-inch HDD delivers 10 TB of storage capacity and a choice of interface (SATA and SAS) with 512n and 512e sector options available. Model options supporting Sanitize Instant Erase (SIE) and Self-Encrypting Drive (SED) are also available. + Industry Standard 3.5-inch 26.1 mm height Form Factor + 7200 rpm Performance + Toshiba Persistent Write Cache Technology for Data-Loss Protection in Sudden Power-Loss Events + Lower operational power profile, providing excellent power efficiency (W/TB) for better TCO
Tootekood: MODERN MD272UPSWGTIN: 4711377256889Monitorid
• 68,6 cm (27") IPS • 4K Ultra HD 3840 x 2160 pikslit 16:9 • 60 Hz 4 ms 300 cd/m² 1000:1 • Võbelust ärahoidev tehnoloogia • F 26 kWh MSI Modern MD272UPSW, 68,6 cm (27"), 3840 x 2160 pikslit, 4K Ultra HD, 4 ms, Valge
This is an universal kit and compatible for particular all beamers. It is supplied with many extension plates to be used with every beamer holepattern. Distance from wall to beamer: 79 to 129 cm. The beamer can easily be turned to the best viewing angle.Cables can be placed in the column.The BEAMER-W100Silver is a wall mount for beamers/projectors that allows you to mount a projector to the wall.
Max. weight 12 kg|Screen size range 10-24"|75 mm x 75 mm|100 mm x 100 mm|Colour Black Max. weight 12 kg Screen size range 10-24" 75 mm x 75 mm Yes 100 mm x 100 mm Yes Colour Black Shipping box quantity 2 Unit Brutto Volume 0,04073 cubm Unit Net Weight 6 kg Unit Gross Weight 7,5 kg
Max. weight 125 kg|Fits screens 60 - 100"|Distance to wall 13 cm|200 mm x 200 mm|Colour Black Max. weight 125 kg Fits screens 60 - 100" Distance to wall 13 cm 200 mm x 200 mm Yes Colour Black Shipping box quantity 1 Unit Brutto Volume 0,01941 cubm Unit Net Weight 9 kg Unit Gross Weight 9,5 kg
The NewStar floor stand, model PLASMA-M1700E is a tiltable mobile floor stand for flat screens up to 55”. This mobile stand is a great choice for space saving placement or when wall-, ceiling mounting or desk placement is not an option. This cart stretches your investment by serving a variety of projection needs by sharing a large display over multiple rooms. Get optimal positioning for both standing and seated audiences, in any application, in any part of your location. NewStars’ unique tilt (15°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 155 to 170 centimetres. A unique cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the stand nice and tidy. NewStars" floor stand, PLASMA-M1700E holds your TV, AV equipment and even hides your cables. The casters allow the stand to move it to where you need it. Easily roll this cart through doorways and over thresholds. NewStar PLASMA-M1700E has one pivot point and is suitable for screens up to 55" (138 cm). The weight capacity of this product is 35 kg each screen. The stand is suitable for screens that meet VESA hole pattern 200x200 to 600x450mm. Screens:1 VESA minimum: 200x200 mm VESA maximum: 600x450 mm Height: 155 - 170 cm Tilt:15°
Original part number HD32-U3S-2 Product name HDD docking station Gembird, For 2.5" and 3.5" SATA hard drives Producer Gembird Class of product USB / stadion Case / docking station interface USB 3.0 Device size 2.5 inches 3.5 inches Device interface SATA Supported devices Hard disk Supported operation systems Microsoft Windows 2000, XP, Vista, 7, 8 Power supply 100-240V AC Bundle includes USB cable AC Adapter Docking station Width 165 mm Height 112 mm Depth 100 mm Net weight 0.213 kg Additional information data transfer up to 10 times faster than USB 2.0 Chipset: ASM1153 Backup button Material: plastic
Schwarze Monitorhalterung von Arctic, für einen 13 - 32 Zoll Monitor (max. 8 kg), VESA 75 x 75 mm / VESA 100 x 100 mm, Höhenverstellbar / Neigbar / Pivot
The NewStar VESA adapter, model FPMA-VESA440 allows a VESA mount with 200x200 interface to be used with displays with VESA hole patterns to 400x400mm. Ideal when flat screen needs different VESA pattern to select wall-, desk- or ceiling mount. NewStar FPMA-VESA440 is suitable for screens up to 60" (152 cm). The weight capacity of this product is 35 kg each screen. Depth of this adapter is 3 millimetres only. The adapter is suitable for screens that meet VESA hole pattern 200x200 to 400x400. Different hole patterns can be covered using NewStar VESA adapter plates.
- Places monitor at comfortable viewing position to prevent neck strain- Supports large CRT or TFT monitors up to 36kg in weight- Adjustable feet provide five height positions 100mm-150mm- Stows laptop underneath for in-office use and to save space- Storage tray organises business essentialsMaksimaalne kaal (mahutavus)36 kgToetatud ekraanide arv1Kõrguse reguleerimineJahKõrguse reguleerimise ulatus100 - 150 mmToote värvMust, HõbeMaterjalPlastLaius500 mmSügavus364 mmKõrgus100 mmKaal1,9 kgPakendi laius366 mmPakendi sügavus512 mmPakendi kõrgus114 mmPakendi kaal2,32 kg
NS-DPOS100BLACK NewStar flat screen desk mount Newstar Desk Mount (bolt down) for 10-32" Monitor Screen - Black The NewStar desk mount, model NS-DPOS100BLACK is a tilt-, swivel and rotatable desk mount for flat screens up to 32?. This mount is a great choice for space saving placement on desks and counters using a bolt-down base. NewStar's versatile tilt (60°), rotate (360°) and swivel (360°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. Ideal for use in offices and on counters or in a reception area. NewStar NS-DPOS100BLACK is suitable for screens up to 32". The weight capacity of this product is 15 kg. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. Min. screen size: 10 inch Max. screen size: 32 inch Functionality Type: Tilt, Rotate, Turn Tilt (degrees): 60° Swivel (degrees): 360° Rotate (degrees): 360° Height: 44 cm Height adjustment: None
The NewStar desk mount, model FPMA-DD550DBLACK is a tilt-, swivel and rotatable desk mount for 2 flat screens up to 32”. This mount is a great choice for space saving placement on desks using a desk stand. NewStar's versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 0 to 46 centimetres. Depth adjustable from 4 to 40 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. NewStar FPMA-D550DBLACK has three pivot points and is suitable for screens up to 32". The weight capacity of this product is 8 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. Screen size: 10 - 32" Desk mount: Desk stand Depth: 4 - 40 cm Height: 0 - 46 cm Tilt: 90° Rotation: 360° Swivel: 180°
The NewStar desk mount, model FPMA-D885BLACK is a desk stand for flat screens up to 32". This mount is a great choice for space saving placement on desks using a desk stand. The mount is easily height adjustable from 7,5 to 32,5 centimetres using a gas spring. Depth 25 centimetres. NewStar FPMA-D885BLACK is suitable for screens up to 32" (81 cm). The weight capacity of this product is 10 kg. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area.
