SuperSpeed USB AXAGON ADSA-SN COMPACT HDD/SSD DOCK docking station easily and quickly connects any SATA disk to your computer. A handy helper for the easiest and fastest way of connecting SATA disks to your computer - just plug the disk into the base. Automatic installation can be done even by the layman. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports sleeping of both the connected disks and station. Low laid centre of gravity of the docking station for good stability. Rubber feet to reduce vibrations. Modern minimalist design of housing with aluminium casing. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB rate of up to 5 Gbit/s. Connection via micro USB type B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, supports 3.5" HDD, max. disk capacity all without limitation, max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down after period of inactivity lasting 15 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. cable micro USB-B / USB-A 80 cm long is included. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Power switch. Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Station dimensions 130 x 65 x 59 mm. Weight 190 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 HDD dock, micro USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with clearly indicated parameters.
The AXAGON RSS-CD09 internal frame is designed to be mounted instead of the existing 9.5 mm CD/DVD drive. It is designed for 2.5" SSD/HDD SATA drives. You can easily replace the optical drive in your laptop with a hard drive. The SATA 6G interface allows you to enjoy the speed of modern SSD disks up to 6 Gb/s. Thanks to the absence of complex electronics, it does not slow down the data transfer speed and supports all modern functions such as TRIM. This reduction ensures wide compatibility with various notebook brands. The ODD frame can be set via double switch so it will work with most notebook brands like LENOVO, HP, DELL, ASUS, ACER, SONY, TOSHIBA and others. It is possible to use standard 2.5 SSD disks with a height of 7 mm as well as hard disks with a height of 9.5 mm. The ODD caddy with mounted disk behaves like a standard hard disk in the operating system and in the BIOS (UEFI). By inserting a disk into the adapter, you can easily add an internal 2.5" disk, which can be used to supplement an existing notebook disk.Booting support can significantly speed up older notebooks by adding a 2.5" SSD disk. The unique screwless disk mounting system is secured with a rubber spacer or rubber thread plugs. Rubber insert plugs also help minimize hard drive vibration. Metal springs help fix the adapter in the optical drive bay. The metal frame body is made of aluminum and ensures perfect mechanical protection of the inserted disk. The built-in HQ capacitor helps stabilize the SSD/HDD power supply. Elegant built-in LED indicates disk insertion and data transfer. The package also includes a plastic faceplate (front panel) imitating the front of the optical CD/DVD drive. There are several mounting holes on the back of the reducer to fix in the notebook body. Input: SATA interface, compatible with SATA 6G (SATA III), SATA 3G (SATA II) and SATA 1.5G (SATA I), 13 pin (7+6) SLIM SATA data and power male connector for notebook connection. Output: SATA interface, compatible with SATA 6G (SATA III), SATA 3G (SATA II) and SATA 1.5G (SATA I), supports 2.5" SSD/HDD, maximum disk capacity all without limitation, maximum disk height - 9.5 mm, standard 22 pin (7+15) SATA data and power female connector for 2.5" disks. Other features: Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The overall speed depends of inserted disk type and the SATA interface version of the notebook optical drive. It is a pure hardware reduction - for all operating systems, no drivers are installed. Disk boot support in external adapter. Full Plug and Play support. The adapter is powered by a 6-pin Slim SATA power connector. Built-in HQ capacitor for stabilized SSD/HDD power supply. The dimensions of the frame correspond to the slim 5.25" position in the laptop. Aluminum body for disk protection and disk cooling. Other features: Adapter dimensions 128 x 127 x 9.5 mm. Adapter weight 66 g (without faceplate). Notice:The height of the original optical drive must be determined before replacement. RSS-CD09 is designed for a 9.5 mm height. Package contains: ODD adapter for 2.5 SSD/HDD, 4 rubber plugs, plastic pry bar, screwdriver, front panel (faceplate), printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Avastage kestvate tulemustega karvaeemaldus, mis on teie naha vastu õrn, ja öelge tere kuni 28 päeva kestvale siledusele. Me teame, et epileerimine võib olla hirmutav. Kuid regulaarsel kasutamisel muutub see vähem valusaks!*
Tehke lastele harjama õppimine huvitavaks. Philips Sonicare For Kidsi Bluetoothiga hambahari suhtleb lõbusa rakendusega, mis aitab lastel paremini ja kauem harjata. Lapsed õpivad rõõmuga tehnikaid, mis jäävad neile kogu eluks. • Sisseehitatud Bluetooth® • Juhendav rakendus • Kaks harjapead • Kaks režiimi
Philips TAR5100 on veekindel kellraadio, mis sobib suurepäraselt nii vannituppa kui öökapile. Kuula FM- või DAB+ raadiot, striimi muusikat Bluetoothi kaudu ja ärka kahe äratusrežiimiga täpselt õigel ajal. • IPX4 pritsmekindel • FM/DAB+ digitaalhäälestus • Bluetooth® 5.3 voogedastus • suur reguleeritava heledusega LCD-ekraan
Store all your favorite moments on this 5 × 7.6 cm photo paper, perfect for the Xiaomi Portable Photo Printer Pro. Photo paper for Xiaomi Portable Photo Printer Pro Photo size: 5 × 7.6 cm Dye sublimation printing technology Pack of 20 sheets and 2 ink cartridges
* Võimas, kompaktne, kerge. 110 000 p/min * TOF-anduritehnoloogiale reguleerib AI-režiim 5–30 cm kaugusel täpselt temperatuuri. See hoiab temperatuuri konstantselt 55 °C juures * Intelligentne käepidemelt juhtimine * Suur puuteekraan lihtsaks juhtimiseks * 7 reziimi (lühikesed/pikad juuksed, laste, AI, püsiv teperaturr, kül/kuum, lemmikloomad) * NTC mootor, võimsus 1600 W, juhtme pikkus 1,8 m
Xiaomi | Router BE19000 Pro EU | 10/100/1000/2500/5000/10000 Mbit/s | Ethernet LAN (RJ-45) ports 6 | Mesh Support Yes | MU-MiMO No | No mobile broadband
OnPower 150 on võimas magnetiline juhtmevaba akupank 15 000 mAh mahutavusega, mis on loodud sülearvutite, nutitelefonide ja teiste seadmete mugavaks laadimiseks. Qi2 juhtmevaba laadimine ja kuni 100 W USB-C väljund teevad sellest praktilise valiku tööks ja reisimiseks. • 15 000 mAh aku terveks päevaks • Qi2 magnetiline juhtmevaba laadimine kuni 15 W • 2 × USB-C porti kuni 100 W Power Delivery toega • USB-A port kuni 30 W • Mitme seadme samaaegne laadimine • Smart IC kaitse turvaliseks laadimiseks
Logitech G512 X 75 on kompaktne 75% paigutusega mänguriklaviatuur, millel on Dual Swap analooglülitid, 8K päringusagedus, LIGHTSYNC RGB-valgustus ja laiad kohandamisvõimalused suure jõudlusega mängimiseks. • 75% paigutus Dual Swap analoog- ja mehaaniliste lülitite toega • 8K päringusagedus ja 0,125 ms reageerimisaeg • Reguleeritav 0,1–4,0 mm aktiveerimiskaugus ja kaheastmelised klahvitoimingud • LIGHTSYNC RGB-valgusriba ja vastupidavad DoubleShot PBT klahvikatted • Kaks programmeeritavat pöördnuppu koos põhjaliku G HUB kohandamisega
Kuni 70 tundi aku kestvust + kiire laadimine (5 min = 2 tundi) • Bluetooth 6.0 + Multipoint • 32 mm dünaamilised elemendid – soe ja loomulik heli • Mugav kõrvapealne disain, pehmed kunstnahast padjad • Toetus häälassistendile (Google Assistant & Apple Siri)
One Sensor, Two Modes for Diverse Needs Designed for flexibility, the Aqara Multi-State Sensor P100 lets you choose between two operating modes to match how and where it’s used./ One Sensor, Two Modes for Diverse Needs Designed for flexibility, the Aqara Multi-State Sensor P100 lets you choose between two operating modes to match how and where it’s used.
Dreame Pocket Aura föön muudab juuste kuivatamise ja peanaha hoolduse nutikamaks. Õhuvool ja temperatuur kohanduvad kuivatamise ajal automaatselt vastavalt seadme kaugusele juustest, aidates vähendada kuumuse mõju, pakkuda peanahale mugavamat tunnet ning muuta juuksed siledamaks ja loomulikult läikivaks. SmartVolt tehnoloogia reguleerib pinge automaatselt, tagades fööni stabiilse töö erinevates piirkondades ja muutes selle mugavaks ka reisil kasutamiseks. • Hooldus 600 miljoni plasmaiooniga • Võimas kiire mootor • Nutikas otsikute mälu • Mitmekülgsed soenguvõimalused erinevate otsikutega • Täiustatud lokkide kujundamine • Mitu kohandatavat kuivatusrežiimi
Õhuniisuti kärgfilter Täiustatud kärgfiltril on 6-kuuline tööaeg, mis on kaks korda pikem kui eelmise põlvkonna kärgfiltril. Piisav veeimavus ja aurutumisjõudlusSee 30 mm paksune kärgfilter on valmistatud PET-materjalist ja sellel on 12-kihiline meekärje struktuur. 15662 ruutsentimeetrit lahtivolditud pinda tagab piisava vee imamis- ja aurustumisjõudluse. Sobib mudelitele: HU4813, HU4803, HU4801.
Drive Cabinet Type: Internal Provides External Drive Bay Dimension102 mm kõrgus (mm): 24 mm sügavus (mm)15 mm Nominal kaal: 0.058 kg garantii Term (month)1kg Pack kaal Netto (kg): 0.1kg Pieces in pack: 1Box kaal Brutto (kg): 1kg Retail Packaging Netokaal Carton: 0.1kg Retail Packaging Netokaal Plastic: 0.1kg Packs in Box: 1Package Type: Retail1
Premium USB-C USB-C data and charging extension AXAGON BUCM32-CF15AB SPEED+ EXTENSIONS USB 3.2 Gen 2 cable with USB-C male and USB-C female connectors. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. Enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space and the location of ports on the laptop. The cable supports up to 20 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Connected devices can be charged with up to 5A current. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The nylon braid gives the cable ultimate strength. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (F) female Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible also with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5A. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones and other devices with USB-C connector especially for multiport hubs, port replicators and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data: cable length 1.5 m, outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C F black cable, packed in a printed and sealed foil package with hanging hole.
Foldable pocket Smart card / ID card reader AXAGON CRE-SMPA PocketReader with USB-A 480Mbps interface. It is especially suitable as an ID card reader for use with mobile phones that have an USB-A input. The most widely used USB-A connector ensures connectivity to almost every new and older computer. The card reader supports all common contact Smart card formats, chip cards and other cards, including contact bank payment cards or contact electronic ID cards *. The reader is compatible with most national applications for eID (electronic ID cards). Compatibility with all common OS such as Windows, Linux, macOS, iOS and Android, allows wide use on desktops and laptops as well as smartphones and tablets. The smart LED indication lights up shortly after the activity change, then turns off and doesn't bother the user with unnecessary light. The foldable design and compact size make this reader one of the smallest Smart Card readers on the market. The integrated loop allows you to hang it e.g. on keys, so you can always have it with you and it will not interfere. Input: USB-C 480Mbps CCID protocol. Backward compatible with USB 1.1. Connection to a computer, phone or tablet via USB 2.0 type A male connector. For connection to a phone or tablet with a USB-C connector, we recommend a USB-C -> USB-A reduction, e.g. AXAGON RUCM-AFAC. For connection to a phone with a micro USB connector, we recommend an OTG reduction micro USB -> USB-A. Card reader: 1 slot supports ATM / CAC / ID / IC / SIS cards. Supports ISO 7816 Class A, B and C contact Smart cards (5V, 3V and 1.8V). Supports ISO 7816, EMV 4.1 (EMV 2000 level 1) standards. Supports protocols T=0 and T=1, I2C, SLE 4432/42 (S=10), SLE 4418/28 (S=9). PC/SC 2.0 PC Smart Card standard support. Microsoft Smart Card for Windows support. Supports I2C cards SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT88SC1608, AT45D041. Microsoft WHQL USB Smart Card Reader compliant. FIPS 201 standard compliant. Other features: Microsoft USB-CCID driver compatible. Plug and Play support. Microsoft USB-CCID driver compatible. Support power saving mode, automatic switching to power saving mode. Powering the reader via USB bus (bus-power). A LED indicates computer USB port connection (steady) and data transfer (flashing). LED indicators lights up shortly after the activity change, then turns off and doesn't bother. Dimension 52 x 20 x 16 mm. Weight 13 g. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, macOS, Linux, iOS and Android. to work with a Smart card, it is necessary to install a suitable application on the connected device.* Note: The reader only supports contact cards that have visible contacts on the surface. The card without contacts is therefore RFID and cannot be used in the reader. Package contains: USB-A Smart Card Reader, key hinge, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.