Firma: Arvutitark OÜ

Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications:Material: PolymersColour: WhiteDimensions (L x W x H):15x15x0,5mmThermal conductivity: Up to 1W/mkAdhesive strength: min: 16N/25mm electrically non-conductiveconforms with ROHS Extent of delivery:1x Alphacool double-sided thermal adhesive pad 15x15x0,5mm

Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications:Material: PolymersColour: WhiteDimensions (L x W x H):30x30x0,5mmThermal conductivity: Up to 1W/mkAdhesive strength: min: 16N/25mm electrically non-conductiveconforms with ROHS Extent of delivery:1x Alphacool double-sided thermal adhesive pad 30x30x0,5mm

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 1.5mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 3mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 30 x 30 x 3mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:4x Alphacool thermal pad for NexXxoS GPX

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool's ultimate solution for cooling your computer with a layer of ice. Not a layer of ice in the traditional sense made of frozen water, but a layer that will freeze any chip. The properties of the new thermal pads speak for themselves.With up to 17 W/mk, the pads outperform all previous thermal pads and pastes! All hardware components can now be installed easily and cleanly using thermal pads!The "Alphacool ice layer" offers all the advantages and typical properties of a thermal pad: self-adhesive, elastic, adaptable and much more! The area of application is just as versatile, whether for RAM and mainboard coolers or graphics card and CPU coolers, wherever the circuit board meets the heat sink, the Alphacool ice layer is a good choice.The pads are available in different power levels, 11, 14 and 17W/mk, each available in 0.5mm, 1mm and 1.5mm thickness to perfectly compensate for height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers). These can be easily separated with scissors to individually adjust the right size for each component. Technical dataDimensions (L x W x H)100 x 100 x 1,5mmThermal conductivity17W/mKThickness1,5mmFlame retardantV-0 (UL94)Useful temperature-40 ~ +150 °CHardness72 (Shore OO)Specific gravity3.2Breakdown voltage10 kV/mmElongation40 %Tensile strength0.5 MPaVolume resistivity1.0x10^11 Ohm-mFasteningslightly adhesiveColorgrey

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool's answer to the often unsolvable problem: "The cooler cannot be screwed on!" With the double-sided thermal adhesive pad from Alphacool, you can mount your cooler in the desired location regardless of hole spacing, mounting brackets or other options provided. This is particularly interesting, for example, with the in-house MCX system for mounting mini coolers for graphics cards or motherboards. But long-term tests show that you can attach much more than just mini coolers! At least 16N / 25mm means an adhesive force that is better than some duct tape! This means that even heavier coolers can be hung up and even impacts during transport or twisting / constant pressure are no problem. The Alphacool thermal adhesive pad also does not lose sight of the cooling performance. While the first thermal adhesive pads on the market behaved more like insulation, these pads even transfer heat at up to 1W/mK. The pads are covered with a protective film on both sides when they are delivered. If you remove this, you can see the bright white pad, which feels almost like rubber and behaves in almost the same way. It adapts very well to the surface. Various pre-made dimensions make cutting almost unnecessary, but if it should ever be necessary to adjust the size, a pair of scissors or a knife is sufficient. Technical data Material: Polymers Color white Dimensions (LxWxH): 26 x 30 x 0.5 mm Thermal conductivity: up to 1W/mk Adhesive strength: min: 16N/25mm electrically non-conductive ROHS compliant scope of delivery 1x Alphacool thermal adhesive pad double-sided 26x30x0.5 mm

The Eisschicht from Alphacool can, like other thermal pads, compensate for the irregularities of heat sinks and the elements to be cooled. But it has a great feature: The Eisschicht consists of thermal paste with an embedded mesh! This ensures that the performance of these pads is much more efficient than normal thermal pads, regardless of the low W/mK value. In addition, a better distribution and filling between the surfaces is achieved. This also results in better air displacement. Due to their soft consistency, there is also no pressure on components or solder joints. Nvidia also uses this kind of pads for the Founders Edition. The Eisschicht can be easily cut to the desired size and attached to heat sinks without slipping.As a basic component or spare part, thermal pads belong in every well-organized computer tinkering corner! Technical dataDimensions (L x W x H)100 x 100 x 0,5mmThermal conductivity3 W/mKElectrical ConductiveNoColorwhite

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)100 x 100 x 1mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight40 gColorGrey

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)50 x 50 x 3mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight28 gColorGrey

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)50 x 50 x 2mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight19 gColorGrey

The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 120 x 20 x 1 mm Colour Grey Specific Gravitiy ASTM D792 3,4 g/cc Thermal Conductivity ASTM D5470 11.0 W/mK Hardness ASTM 2240 72 Shore OO Useful Temperature -40 to +150 °C Volume Resistivity ASTM D257 1.0x1011 Ohm-m Dielectric Constant ASTM D150 7,2 MHz Dielectric Breakdown Voltage ASTM D149 14 kV/mm Flame Rating UL 94 V-0 Weight 20 g Download Datasheet PDF: Alphacool Apex Soft Thermal Pad 11W/mk 2x 120x20x1mm

The Eisschicht Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. These Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Ultra Soft thermal pads acts similar to a thermal paste. While normal thermal pads are only pressed together by the contact pressure there can be areas that are uneven due to different high components, making them less effective. With the ultra soft Eisschicht this problem doesn’t exist because the material distributes itself similar to thermal paste and thus prevents the highest components from being subjected to increased contact pressure by the cooler. As standard thermal pads are quite stiff they can also cause too much pressure on components. In the worst cases, this can cause the PCB to bend and even break. Due to the soft consistency of the Ultra Soft Eisschicht any excess material can spread out rather than cause problems. The Ultra Soft Eisschicht is not only performance orientated, but also safer!But this is not the only advantage!Moreover, the special material cannot dry out. Usually the silicone in thermal pads bleeds out over time. This makes them hard and the performance of the pads drops rapidly from a certain point. This is not the case with the Ultra Soft Eisschicht. They can be used over a much longer period of time without significantly losing performance.A thermal pad with fabric?The consistency of the heat conducting material is similar to a viscous heat conducting paste. A special fabric is embedded so that the material remains stable and can be used as a thermal pad. This ensures a perfect distribution of the material if the element to be cooled has an uneven shape. Examples include voltage transformers, VRam and similar electronic components of all kinds that require cooling.Cutting? No problem!To cut the thermal pads to size, you should definitely leave the foil on the pads. So the pads can easily be cut to size with a pair of scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. Technical dataL x W x H100 x 100 x 1,5mmSpecific Gravitiy ASTM D2972,65 g/ccThermal Conductivity ASTM D54703.0 W/mKHardness ASTM 224020 Shore 00Working temperature40 to 200°COutgassing ASTM E5950,40% TMLVolume Resistivity ASTM D2576.2X10 high 13 Ohm-meterDielectric Constant ASTM D1505,5 MHzDielectric Breakdown Voltage ASTM D149>5000 VACFlame Rating UL E33110094 V0Colorwhite

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Thermal Hero GAMMA Phase Changer – Phase Change Thermal Interface Material (TIM) Discover a new era of cooling with the Thermal Hero GAMMA Phase Changer. This liquid thermal pad combines high thermal conductivity with excellent cooling performance and is perfectly suited for computers, PCs, electronics, gaming consoles, laptops, and graphics cards. High thermal conductivity through phase change More efficient heat transfer Self-adapts to contact surface – optimal fit Clean application thanks to fast, adhesive layer on one side Consistent performance under varying loads User-friendly and pressure-activated Low material thickness / slim profile Includes cleaning cloth for easy surface preparation Cuttable, ideal for overclocking GAMMA is characterized by its unique ability to change from solid to semi-solid at operating temperatures above 44 °C. This phase change completely fills microscopic gaps and surface irregularities, ensuring optimal heat transfer and reliable cooling—especially under high thermal loads. Applications: CPUs and GPUs Heatsinks in PCs, laptops, and graphics cards Electronic components with high heat output Overclocking scenarios that require maximum cooling performance Application instructions: Use the adhesive side and clean the surface (with the included cleaning cloth) Cut the pad and apply it precisely Activate with pressure to ensure even distribution

Thermal Hero GAMMA Phase Changer – Phase Change Thermal Interface Material (TIM) Experience a new era of cooling with the Thermal Hero GAMMA Phase Changer. This phase change thermal pad combines high thermal conductivity with excellent cooling performance, making it perfect for computers, PCs, electronics, gaming consoles, laptops, and graphics cards. High thermal conductivity through phase change More efficient heat transfer Self-adapts to the contact surface – perfect fit Clean application thanks to fast, adhesive coating on one side Consistent performance under variable load User-friendly and pressure-activated Thin material / low profile Includes cleaning wipe for easy surface preparation Cuttable, ideal for overclocking GAMMA is characterized by its unique ability to change from solid to semi-solid at operating temperatures above 44 °C. This phase change completely fills microscopic gaps and surface irregularities, ensuring optimal heat transfer and reliable cooling—especially under high thermal demands. Applications: CPUs and GPUs Heatsinks in PCs, laptops, and graphics cards Electronic components with high heat output Overclocking scenarios where maximum cooling is required Instructions for use: Use the adhesive side and prepare the surface cleanly (with the included cleaning wipe) Cut the pad to size and apply precisely Apply pressure to ensure even distribution

THERMAL HERO Graphene Sheet 100x100x0.025mm Discover the future of thermal management with the THERMAL HERO Graphene Sheet. The ultra-thin graphene film offers outstanding thermal conductivity and powerful cooling performance – ideal for computers, PCs, electronics, gaming consoles, laptops, and graphics cards. Very high thermal conductivity Extremely thin: 0.025 mm layer thickness for minimal heat absorption Intensive cooling performance even under heavy loads Long-term stability and corrosion resistance Easy application thanks to fast-adhering adhesive layer on one side Includes cleaning cloth, pressure-activatable and cut to fit Suitable for overclocking Note: Caution: Electrically conductive! Applications: CPU/GPU cooling, heat sinks in PCs, laptops, gaming consoles, and electronics with high heat demands Overclocking scenarios where maximum cooling performance is required Why Graphenex? Graphenex utilizes the exceptional properties of graphene – extreme thermal conductivity, high flexibility, and light weight – for efficient and reliable cooling in an ultrathin format. With thermal conductivity that is among the leaders in this category, Graphenex meets even the highest thermal requirements. Application notes: Use the adhesive side, clean surfaces beforehand If desired, cut to size and apply precisely If necessary, apply gentle pressure to achieve even distribution

THERMAL HERO Graphene Sheet 32x32x0.025mm Discover the future of thermal management with the THERMAL HERO Graphene Sheet. This ultra-thin graphene film provides outstanding thermal conductivity and strong cooling performance—ideal for computers, PCs, electronics, gaming consoles, laptops, and graphics cards. Very high thermal conductivity Extremely thin: 0.025 mm layer thickness for minimal heat absorption Intensive cooling performance even under heavy loads Long-term stability and corrosion resistance Easy to apply thanks to the fast-adhering adhesive layer on one side Includes cleaning cloth, pressure-activated, and can be cut to size Suitable for overclocking Note: Caution: Electrically conductive! Areas of application: CPU/GPU cooling, heatsinks in PCs, laptops, gaming consoles, and electronics with high heat demands Overclocking scenarios where maximum cooling performance is required Why Graphenex? Graphenex utilizes the exceptional properties of graphene—extreme thermal conductivity, high flexibility, and low weight—for efficient and reliable cooling in an ultra-thin format. With industry-leading thermal conductivity, Graphenex meets even the most demanding thermal requirements. Application instructions: Use the adhesive side and clean surfaces beforehand Cut to size as needed and apply precisely If necessary, gently apply pressure to achieve an even distribution

THERMAL HERO Graphene Sheet 51x68x0.025mm Discover the future of thermal management with the THERMAL HERO Graphene Sheet. This ultra-thin graphene foil delivers outstanding thermal conductivity and powerful cooling performance—ideal for computers, PCs, electronics, game consoles, laptops, and graphics cards. Very high thermal conductivity Extremely thin: 0.025 mm thickness for minimal heat absorption Intense cooling performance even under high loads Long-term stability and corrosion resistance Easy application thanks to fast-adhering adhesive layer on one side Includes cleaning cloth, pressure-activated, and can be cut to size Suitable for overclocking Note: Caution: Electrically conductive! Areas of application: CPU/GPU cooling, heatsinks in PCs, laptops, game consoles, and electronics with high heat output Overclocking scenarios where maximum cooling performance is required Why Graphenex? Graphenex utilizes the extraordinary properties of graphene—extreme thermal conductivity, high flexibility, and low weight—for efficient and reliable cooling in an ultra-thin format. With thermal conductivity that is among the best available, Graphenex meets even the highest thermal requirements. Application instructions: Use the adhesive side and clean surfaces beforehand Cut to size as needed and apply precisely If necessary, apply gentle pressure to achieve even distribution

THERMAL HERO NEO 100 x 100 x 0.5 mm Thermal Hero NEO 100 x 100 x 0.5 mm – High thermal conductivity thermal pad for BASIC APPLICATIONS (CPU, GPU, laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of ease of use and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g. Xbox, PS3/4/5) as well as other electronics with moderate thermal requirements. The pads adhere quickly and are easy to install thanks to an adhesive layer on one side. Includes cleaning cloth, pressure-activated, and can be cut to size, making them flexible for different components. Wide range of thermal conductivities, suitable for various applications Shore hardness 20–40 (medium soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 100 x 100 x 3.0 mm Thermal Hero NEO 100 x 100 x 3.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate thermal requirements. Thanks to an adhesive layer on one side, the pads adhere quickly and are easy to install. Includes cleaning cloth, pressure-activated and cuttable, allowing you to flexibly adapt them to different components. Wide range of thermal conductivities, suitable for different applications Shore hardness 20–40 (medium-soft), easy to cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 100 x 100 x 2.0 mm Thermal Hero NEO 100 x 100 x 2.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for basic applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate heat requirements. The pads have an adhesive layer on one side for quick adhesion and easy installation. They come with a cleaning cloth, are pressure-activated and can be cut to size, allowing you to flexibly adapt them to different components. Wide range of thermal conductivities, suitable for various applications Shore hardness 20–40 (medium soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 100 x 100 x 1.5 mm Thermal Hero NEO 100 x 100 x 1.5 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent strength and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for basic applications such as CPUs, GPUs, laptops, and gaming consoles (e.g. Xbox, PS3/4/5), as well as other electronics with moderate cooling needs. The pads come with an adhesive layer on one side for quick stick-on and easy installation. Includes cleaning cloth, pressure-activatable, and cuttable to flexibly adapt to different components. Wide range of thermal conductivities available for different applications Shore hardness 20–40 (medium-soft), easily cut to size with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 100 x 100 x 1.0 mm Thermal Hero NEO 100 x 100 x 1.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an outstanding combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate thermal demands. The pads are quickly adhesive and easy to install thanks to an adhesive layer on one side. Includes cleaning cloth, pressure-activated, and can be cut to size, allowing you to adapt them flexibly to various components. Wide range of thermal conductivities, suitable for different applications Shore hardness 20–40 (medium-soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 0.5 mm Thermal Hero NEO 120 x 20 x 0.5 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate heat requirements. The pads feature an adhesive layer on one side for quick stick-on installation and are easy to apply. Includes cleaning cloth, pressure-activatable, and can be cut to size, making them flexible and adaptable for various components. Wide range of thermal conductivities available, suitable for different applications Shore hardness 20–40 (medium soft), easily cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 1.5 mm THERMAL HERO NEO 120 x 20 x 1.5 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent hardness and pressure distribution Long-term stability Electrical insulation User friendliness Reliable performance THERMAL HERO NEO thermal pads provide an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5) as well as other electronics with moderate thermal requirements. The pads are quickly adhesive and easy to install thanks to an adhesive layer on one side. Includes cleaning cloth, pressure-activated, and cuttable, allowing you to flexibly adapt them to different components. Wide selection of thermal conductivities to suit different applications Shore hardness 20–40 (medium soft), easily cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 1.0 mm Thermal Hero NEO 120 x 20 x 1.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of ease of use and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and game consoles (e.g. Xbox, PS3/4/5), as well as other electronics with moderate heat demands. The pads are quick to adhere and easy to install thanks to an adhesive layer on one side. Includes cleaning cloth; pressure-activated and can be cut to size, allowing flexible adaptation to various components. Wide range of thermal conductivities to suit different applications Shore hardness 20–40 (medium-soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 2.0 mm Thermal Hero NEO 120 x 20 x 2.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an outstanding combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate thermal requirements. The pads have an adhesive layer on one side for quick attachment and easy installation. Includes cleaning cloth, pressure-activated, and can be cut to size so you can flexibly adapt them to various components. Wide range of thermal conductivities to suit different applications Shore hardness 20–40 (medium-soft), easily cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 30 x 30 x 0.5 mm Thermal Hero NEO 30 x 30 x 0.5 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops and gaming consoles (e.g. Xbox, PS3/4/5) as well as other electronics with moderate thermal requirements. The pads are quick to adhere and easy to install thanks to an adhesive layer on one side. Includes cleaning cloth, pressure-activated and easy to cut, so you can flexibly adapt them to different components. Wide range of thermal conductivities available for different applications Shore hardness 20–40 (medium-soft), easily cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 3.0 mm Thermal Hero NEO 120 x 20 x 3.0 mm – High thermal conductivity thermal pad for BASIC APPLICATIONS (CPU, GPU, laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads provide an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5) as well as other electronics with moderate thermal requirements. The pads feature an adhesive layer on one side for quick attachment and easy installation. Includes cleaning wipe, pressure-activated, and cuttable so you can flexibly adapt them to different components. Wide range of thermal conductivities, suitable for different applications Shore hardness 20–40 (medium-soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

• USB / Lightning cable with LED light • Useful LED light – Breathable colored lights make charging more convenient to use at night. • Fast and safe charging – 2.4A current and pure copper wire provide faster and more secure charging. • Smart chip – Adjusts the appropriate current to the connected device based on intelligent identification technology. • Reinforced joint – With an extra joint reinforcement accessory for a truly anti-break design. • Charging and data transfer simultaneously – You can charge and transfer data from your phone to your PC at the same time. • Aluminum plug shell – High-quality aluminum alloy plug housing, resistant to both oxidation and corrosion. • Nylon braid – The elastic cord is braided with strong and durable nylon. High elasticity, bending resistance, and a nice touch feeling. • Convenient velcro – Thanks to the simple and practical velcro, you can say goodbye to messy cables. Makes storage easier and prevents knotting. • Connectivity: USB-A male to Lightning male • Power: 5V/2.4A (10W max) • USB version: 2.0 (up to 480Mbps)

Kodak Professional Dektol is a standard black and white photographic paper developer for RC and fiber based dark printing papers. It is a powdered concentrate that is mixed with water to make 3.8 L of stock solution. Dilute the concentrate 1:2 to prepare a safe solution.This developer has been the industry standard for decades and is suitable for processing many types of paper. When used with cool-toned papers, it produces cool to neutral tones, and with warm-toned papers, it produces warm tones. A traditional black and white photo paper developer 551 g of concentrated powder to prepare 3.8 l of basic solution It is diluted 1:2 to obtain a working solution Produces neutral or cool tones on cool-toned papers and warm tones on warm-toned papers Offers high power and consistent development speed

10 Ports charging station can simultaneously charge 10 laptops, 10 tablets, 10 high-capacity phones, or a mix of 10 devices to meet your diverse needs. Item No.: C10S-1000 • Features an exquisite metal casing, showcasing a premium and durable design. • Each port is equipped with an indicator light – red during charging and green when fully charged. • Each port supports a maximum output of 100W, utilizing proprietary IPA technology for automatic adjustment, ensuring optimal charging for devices. • Suitable for schools, offices, retail environments, government agencies, and more.