PCTG is an advanced 3D printing filament, belonging to the same polyester family as the popular PET-G. Compared to PET-G, PCTG has higher impact strength, heat resistance (up to 76°C) and transparency. It offers an interesting alternative to PET-G. Like PET-G, PCTG does not require a heated print chamber, making it an excellent choice if you plan to print on open hobby printers.PCTG is characterized by high flexibility, strong adhesion between layers, high viscosity and minimal shrinkage. Its characteristics enable easy and efficient printing, even for those without much 3D printing experience. 3D printing using PCTG is widely used in various sectors. In industry, it is an ideal choice for creating parts, small batch production and usable models, confirming the versatility of this material. The automotive sector also benefits from the advantages of PCTG, using it to print accessories, components in the engine compartment, vehicle component housings, as well as components such as air intakes and fluid inlets (chemical resistance). In the world of sport, PCTG proves its value in the production of various types of accessories, protectors, etc. The properties of this material guarantee not only the high durability of the finished prints, but also their aesthetics and functionality. APPLICATION- spare parts,- small batch production,- utility models,- engine compartment accessories and components,- vehicle component housings,- air intakes,- service fluid inlets,- sports accessories, protectors, etc. HOW TO PRINTRecommended printing temperature 240-270°C.Recommended table temperature: 60-80°C.Heated table required TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000g Print temperature 240-270 °CBed temperature 60-80 °C PHYSICAL PARAMETERS Density 1,24 g/cm3Odor OdorlessTensile strength (to break) 46 MPaNotched Izod impact strength 92 kJ/m2Vicat softening point 76/64 °C (0,455 MPa/1,82 Mpa) Printable model for refill spool sides you can download here: Recommended printing parameters:
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: chocolate brown Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
ROSA-Flex 96A is a thermoplastic polyurethane (TPU). It is intended for intermediate users of 3D printers who want to start their adventure with printing from flexible materials. The ROSA-Flex 96A filament is hard enough to be printed even on printers with Bowden feeding. In addition, it does not require a closed chamber and will easily stick to many work surfaces (eg. glass, smooth PEI, textured PEI, alluminum). ROSA-Flex 96A has excellent interlayer adhesion. Filament made of TPU will be perfect if you need elements resistant to chemical reagents and mechanical damage. Prints can be squeezed and stretched many times without permanently changing their original shape. You can print use it to print a protective case for your smartphone in one of the many vivid colors. ROSA-Flex 96A is a durable technical material, resistant to oils, greases and many solvents. What's more, ROSA-Flex 96A filament was made of components approved for contact with food, complying with FDA 21CFR177.2600 and the amendment of the Commission (EU) 10/2011. For products that come into contact with food, the certification lies with the manufacturer of the final product. APPLICATIONHobby: smartphone cases, drone elements, elements for RC carsTechnical: gaskets, bumpers, anti-vibration dampers / feet, housings, orthoses HOW TO PRINTRecommended printing temperature 220-250°CRecommended bed temperature: 30-60°CRecommended cooling:50-100% (depends on the geometry of the model)Recommended print speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)Compatible bed materials: glass, smooth PEI, textured PEI, alluminum. TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000 gPrint temperature 220-250 °CBed temperature 30-60 °C HYSICAL PARAMETERSDensity 1,22 g/cm3Odor OdorlessTensile elongation 350 % (EN 12803)Vicat softening point 126°C (ISO 306)
PCTG is an advanced 3D printing filament, belonging to the same polyester family as the popular PET-G. Compared to PET-G, PCTG has higher impact strength, heat resistance (up to 76°C) and transparency. It offers an interesting alternative to PET-G. Like PET-G, PCTG does not require a heated print chamber, making it an excellent choice if you plan to print on open hobby printers.PCTG is characterized by high flexibility, strong adhesion between layers, high viscosity and minimal shrinkage. Its characteristics enable easy and efficient printing, even for those without much 3D printing experience. 3D printing using PCTG is widely used in various sectors. In industry, it is an ideal choice for creating parts, small batch production and usable models, confirming the versatility of this material. The automotive sector also benefits from the advantages of PCTG, using it to print accessories, components in the engine compartment, vehicle component housings, as well as components such as air intakes and fluid inlets (chemical resistance). In the world of sport, PCTG proves its value in the production of various types of accessories, protectors, etc. The properties of this material guarantee not only the high durability of the finished prints, but also their aesthetics and functionality. APPLICATION- spare parts,- small batch production,- utility models,- engine compartment accessories and components,- vehicle component housings,- air intakes,- service fluid inlets,- sports accessories, protectors, etc. HOW TO PRINTRecommended printing temperature 240-270°C.Recommended table temperature: 60-80°C.Heated table required TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000g Print temperature 240-270 °CBed temperature 60-80 °C PHYSICAL PARAMETERS Density 1,24 g/cm3Odor OdorlessTensile strength (to break) 46 MPaNotched Izod impact strength 92 kJ/m2Vicat softening point 76/64 °C (0,455 MPa/1,82 Mpa) Printable model for refill spool sides you can download here: Recommended printing parameters:
Oclean Flow S elektriline hambahari – valge Kuni 180-päevane aku tööiga: muretu aku kestvus püsivaks suuhoolduseks. Elektrilise hambaharja aku kasutusiga on pärast täislaadimist kuni 180 päeva ilma tüütu laadimiseta iga nädal või kuu. • Võimas Sonic puhastus: sellel elektrilisel hambaharjal on sonic-tehnoloogia, mis vibreerib kiirusega 76 000 liigutust minutis, mis kaitseb tõhusalt hambaemaili ning tagab võimsa ja põhjaliku suupuhastuskogemuse. • 5 suure jõudlusega harjamisrežiimi: hommikune / öö / standardne / valgendamine / õrn 5 režiimi, et rahuldada kõiki võimalikke vajadusi. Iseloomulik öörežiim sügavpuhastab toidujäägid. Valgendusrežiim eemaldab tõhusalt hammastelt plekid, et taastada nende loomulik valge. Kui te pole kunagi varem elektrilist hambaharja kasutanud, alustage juhtimise hõlbustamiseks õrna režiimiga! Algtasemel, algajasõbralik. • Suure tihedusega DuPont™ harjased: Oclean Flow harjapeal on ergonoomiline 3D-disain, mis sobib hammastele paremini. Kõrge tihedusega DuPont™ harjased, mille filament on ümardatud, pakuvad kõige mugavamat harjamiskogemust. • Nutikas taimer: Algajatele mõeldud lihtsalt juhitava helilise elektrilise hambaharina Oclean Flow elektrilisel hambaharjal pole mitte ainult erinevaid režiime, vaid ka 2-minutiline nutikas taimer, 30-sekundiline tsoonivahetuse meeldetuletus ja nutikad märgutuled. • IPX7 veekindel: Oclean Flow’l on IPX7 veekindel, mida saab pesta voolava vee all, et vältida selle ummistumist ja hambapastaga katmist ning hoida seda kergesti puhtana. Komplektis on: 1 käepide, 3 Standard Clean otsikut, 1 USB laadija, 1 kasutusjuhend https://youtu.be/K8r6LceXJp4 Oclean Flow IPX7- veekindel
ROSA-Flex 96A is a thermoplastic polyurethane (TPU). It is intended for intermediate users of 3D printers who want to start their adventure with printing from flexible materials. The ROSA-Flex 96A filament is hard enough to be printed even on printers with Bowden feeding. In addition, it does not require a closed chamber and will easily stick to many work surfaces (eg. glass, smooth PEI, textured PEI, alluminum). ROSA-Flex 96A has excellent interlayer adhesion. Filament made of TPU will be perfect if you need elements resistant to chemical reagents and mechanical damage. Prints can be squeezed and stretched many times without permanently changing their original shape. You can print use it to print a protective case for your smartphone in one of the many vivid colors. ROSA-Flex 96A is a durable technical material, resistant to oils, greases and many solvents. What's more, ROSA-Flex 96A filament was made of components approved for contact with food, complying with FDA 21CFR177.2600 and the amendment of the Commission (EU) 10/2011. For products that come into contact with food, the certification lies with the manufacturer of the final product. APPLICATIONHobby: smartphone cases, drone elements, elements for RC carsTechnical: gaskets, bumpers, anti-vibration dampers / feet, housings, orthoses HOW TO PRINTRecommended printing temperature 220-250°CRecommended bed temperature: 30-60°CRecommended cooling:50-100% (depends on the geometry of the model)Recommended print speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)Compatible bed materials: glass, smooth PEI, textured PEI, alluminum. TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000 gPrint temperature 220-250 °CBed temperature 30-60 °C HYSICAL PARAMETERSDensity 1,22 g/cm3Odor OdorlessTensile elongation 350 % (EN 12803)Vicat softening point 126°C (ISO 306)
PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless. Applications: prototyping, large-format printing, lampshades/enclosures. PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Recommended printing parameters extrusion temperature 220-250°C bed temperature: 60-80°C fan: 0-60% Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: army green Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.29 g/cm3 Odor: odourless Heat distortion temperature: 78°C (ISO 306) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 6 % Tensile strength (to break): 20 MPa
A popular, highly durable filament with a glossy, smooth finish. ABS has a high melting temperature compared to other materials available for 3D printing, making it well suited for applications where heat resistance is important such as concept modelling for the building, electrical and automotive industries. Verbatim ABS is made to a special recipe with high quality controls as standard. High performance Acrylonitrile Butadiene Styrene (ABS) for material extrusion High rigidity, high gloss, medium impact strength Resistant to grease Good post-printing workability Strong odour during printing Main applications: Concept modelling for building, electrical, automotive industry etc. Non-critical parts such as enclosures
A popular, highly durable filament with a glossy, smooth finish. ABS has a high melting temperature compared to other materials available for 3D printing, making it well suited for applications where heat resistance is important such as concept modelling for the building, electrical and automotive industries. Verbatim ABS is made to a special recipe with high quality controls as standard. High performance Acrylonitrile Butadiene Styrene (ABS) for material extrusion High rigidity, high gloss, medium impact strength Resistant to grease Good post-printing workability Strong odour during printing Main applications: Concept modelling for building, electrical, automotive industry etc. Non-critical parts such as enclosures
Creality CR-PETG Filament (Red) Creality's PETG filament combines the advantages of PLA and ABS filaments. It is environmentally friendly and not prone to distortion, while enabling smooth and precise printing. It is also distinguished by its high strength and moisture resistance, and its surface is eye-catching with a beautiful sheen. What's more, CR-PETG filament is compatible with most FDM Creality printers. High quality manufacturing Thanks to the use of environmentally friendly PETG plastic, the filament is very durable and does not emit unpleasant odors. It also features a uniform diameter and resistance to moisture, distortion and cracking. In addition, its tensile strength reaches 49 MPa. An additional advantage of the filament is its beautiful, glossy surface - it is perfect for printing figurines and decorations, for example! Smooth printing The filament allows smooth, fast and precise printing - without wrinkles and bubbles on the project. At the same time, it guarantees perfect flow and minimizes the risk of clogging the printer nozzle. So you can print your models without any problems and save precious time! ManufacturerCrealityNameCR-PETG 3D printer filamentModel3301030038ColorRedPrinting temperatureFrom 230°C to 250°CTensile strength49 MPaFilament diameter1.75 mmWeight1 kg
Lihtne PLA materjal, mis võimaldab toota väga kvaliteetseid väljatrükke ja vältida komplikatsioone printimise ajal. Ükskõik kui palju kogemusi teil on 3D printimise alal, EASY PLA abil printimine inspireerib teid kindlasti võtma ette veelgi ambitsioonikamaid ja keerulisemaid projekte.Kõik on seotud tulemusega. Teie väljatrükkidest saab kindlasti midagi, mida saate teistele 3D-printimise entusiastidele näidata. Kohandamine:Mänguasjad ja muud esemed: figuurid, kontseptsioonimudelid, ehted: kõrvarõngad, käevõrud, helmedAksessuaarid: võtmehoidjad, statiividPrototüübid: uued mudelid, kontseptsioonimudelidEhted ja ehtekomponendid: kõrvarõngad, käevõrud, helmedKaunistused: jõulukaunistused, ripatsidOmadused:Biolagunev plastikVäga hea kihtide haarduvusKuidas printida?Trükkimistemperatuur: 200-230°CSubstraadi temperatuur: 50-70°C Läbimõõt 1,75mmLäbimõõdu tolerants +/- 0,02 mmOvaalsuse tolerants + 0,01 mmTrükkimistemperatuur 200-230°CTampooni temperatuur 50-70°C
Vastupidavus ja täpsusIMPACT PLA pakub omadusi, mis on võrreldavad või paremad kui ABS-kile, säilitades samas traditsioonilisele PLA-le omase lihtsa ja turvalise trükiprotsessi. See plast pakub suuremat vastupidavust pragunemisele ja purunemisele tänu kõrgele löögikindlusele ja suuremale vastupidavusele kõrgetele temperatuuridele. Tänu nendele omadustele sobib IMPACT PLA ideaalselt nõudlike toodete loomiseks ekstreemsetes tingimustes, säilitades samas kõrgeima tähelepanu detailidele.IMPACT PLA on järeleproovitud plast funktsionaalsete prototüüpide ja tugevate tööriistade trükkimiseks.Rakendused:Mänguasjad ja mänguasjaosad: mänguklotsid, masinaosad, robotiosad.Prototüübid: tööriistad, kontseptsioonimudelid, ühendusdetailid, mehaanilised osad, kõrgematele temperatuuridele vastupidavust nõudvad elemendid.Varuosad: masinate, seadmete, sõidukite, elektroonikaseadmete osad ja komponendid.Tööriistad või nende elemendid: hammasrataste, hammasrataste, füüsilist tugevust nõudvad elemendidTooted: karbid, käepidemedOmadused:Suurem löögitugevus (kuni 800% võrreldes PLAga ja kuni 50% võrreldes ABSiga).paremad omadused kui ABSTäppistrükkkihtide hea haardumineläbimõõt 1,75 mmLäbimõõdu tolerants +/- 0,02 mmOvaalsuse tolerants + 0,01 mmTrükkimistemperatuur 220-245 °CSubstraadi temperatuur 50-70 °CKuidas printida?Trükkimistemperatuur 220-245°CTampooni temperatuur: 50-70°C
Vastupidavuse arengNailoni kõrge vastupidavus kõrgetele temperatuuridele, alkoholile ja kemikaalidele muudab selle eriti kasulikuks mehaanilistes ja tehnilistes rakendustes. See on äärmiselt tugev ja ei purune kergesti. Nailon on kergesti töödeldav metallitöötlusvahenditega ja seda on ka lihtne värvida. Nailon on äärmiselt paindlik - ta võib enne purunemist kuni 50% ulatuses venida Nailon ei ole vastupidav kontsentreeritud leeliste või hapete suhtes.Nailoni kõrge vastupidavus kõrgetele temperatuuridele, alkoholile ja kemikaalidele muudab selle eriti kasulikuks mehaanilistes ja tehnilistes rakendustes. Ta on äärmiselt tugev ja ei purune kergesti. Nailon on kergesti töödeldav metallitöötlusvahenditega ja seda on lihtne värvida.Nailon on äärmiselt paindlik - see võib enne purunemist kuni 50% ulatuses venida.Nailon ei ole vastupidav kontsentreeritud leeliste või hapete suhtes.Kasutamine:Mehaanilised osad: juhikud, hammasrattadTehnilised komponendid: liuglaagrid, mutridOmadused:Kõrge vastupidavus kõrgetele temperatuuridele ja keemilistele ühenditeleSuur paindlikkuskulumiskindlusKuidas printida:Need parameetrid on ainult soovituslikud võimalikud trükiseadistused selle materjali jaoks. Parima trükikvaliteedi tagamiseks on vaja valida konkreetsele printerile ja trükitingimustele sobivad seaded.Düüsi temperatuur255-270°CTrükiplatvormi temperatuur90-110°CTrükkimine suletud korpusega printeriganõutavVentilaator0-10%Voolukiirus95-105%Trükikiirus35-60 mm/sTampoonikihi katmineKlaas, PVA liim, juukselakkTagasitõmbamine (otsene)2-3 mmTagasitõmbamine (bowden)4-6 mmTagasitõmbamise kiirus20-45 mm/s
All-metal integrated design for rapid assembly and disassembly Maximum flow rate of up to 30 mm3/s, and supporting high-speed printing at 600 mm/s Upgraded material, suitable for printing a variety of filaments Compatible Filaments: PLA, ABS, PETG, TPU, PP, PC, PLA-CF,PA-CF, PET-CF, etc. Work with K1C, Ender-3 V3, Ender-3 V3 Plus
