Otsing: thermal pad

The Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data cooler L x W x H 266,65 x 122,4 x 24,35 mm Material cooler Nickle-plated copper Material cooler top Acrylic Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Technical data backplate L x W x H 266,65 x 97,6 x 6 mm Material Aluminium Color Black Compatibility list: - ASUS Turbo GeForce RTX 3080 10GB (TURBO-RTX3080-10G) - ASUS Turbo GeForce RTX 3080 V2 10GB (TURBO-RTX3080-10G-V2) - ASUS Turbo GeForce RTX 3090 (90YV0FK0-M0NB00) Downloads: Datasheet PDF | Manual PDF | Nvidia List of Compatibility PDF Links: Graphics Card Configurator

Coldwork™ M-Pact Heated Glove with clim8® TechnologyThe ColdWork™ M-Pact® Heated Glove is a groundbreaking product that delivers an intelligent, self-regulating, and activating Thermal Technology Heating System from clim8®, the strength of Durahide™ cowhide, ultimate insulation from 133g PrimaLoft® Gold and maximum knuckle protection from 4mm D3O®. This glove combines revolutionary technology, materials, and protection to ensure that you are warm and can work in the harshest winter conditions. Usage, heat settings, and general wear may effect run timeFEATURES:• clim8® intelligent Thermal Technology Heating System that automatically turns on when glove is placed on hand• Hand temperature can be set from 68-95°F with clim8® technology• Heating system adjusts and regulates internal temperature based on body and outside temperatures for optimum hand warmth & temperature at all times• Includes: (2) 7.4V, 3000 mAh Lithium-ion batteries and (1) 100-240V AC to DC 8.4V, 2A charger• Easily accessible waterproof battery pouch for easy charging and connectivity• Downloadable companion app for ability to personalize and easily adjust the thermal comfort to your exact needs• Indicator light that notifies users when the glove is actively heating• Built with Super soft Durahide™ Cow hide glove with heavy duty nylon stitching throughout for maximum strength• Insulated with 133g PrimaLoft® Gold throughout for ultimate insulation in the most extreme conditions• 4mm D3O® padding on knuckles and back of hand for increased impact protection• Reflective Piping on back of hand for high visibility at night• Ergonomic palm design and hot stamp texture for maximum grip• Touchscreen capable finger to ensure you are always connectedIntended Uses• Maintenance & Repair• Snow Removal• Towing & Transport• Construction

Coldwork™ M-Pact Heated Glove with clim8® TechnologyThe ColdWork™ M-Pact® Heated Glove is a groundbreaking product that delivers an intelligent, self-regulating, and activating Thermal Technology Heating System from clim8®, the strength of Durahide™ cowhide, ultimate insulation from 133g PrimaLoft® Gold and maximum knuckle protection from 4mm D3O®. This glove combines revolutionary technology, materials, and protection to ensure that you are warm and can work in the harshest winter conditions. Usage, heat settings, and general wear may effect run timeFEATURES:• clim8® intelligent Thermal Technology Heating System that automatically turns on when glove is placed on hand• Hand temperature can be set from 68-95°F with clim8® technology• Heating system adjusts and regulates internal temperature based on body and outside temperatures for optimum hand warmth & temperature at all times• Includes: (2) 7.4V, 3000 mAh Lithium-ion batteries and (1) 100-240V AC to DC 8.4V, 2A charger• Easily accessible waterproof battery pouch for easy charging and connectivity• Downloadable companion app for ability to personalize and easily adjust the thermal comfort to your exact needs• Indicator light that notifies users when the glove is actively heating• Built with Super soft Durahide™ Cow hide glove with heavy duty nylon stitching throughout for maximum strength• Insulated with 133g PrimaLoft® Gold throughout for ultimate insulation in the most extreme conditions• 4mm D3O® padding on knuckles and back of hand for increased impact protection• Reflective Piping on back of hand for high visibility at night• Ergonomic palm design and hot stamp texture for maximum grip• Touchscreen capable finger to ensure you are always connectedIntended Uses• Maintenance & Repair• Snow Removal• Towing & Transport• Construction

Coldwork™ M-Pact Heated Glove with clim8® TechnologyThe ColdWork™ M-Pact® Heated Glove is a groundbreaking product that delivers an intelligent, self-regulating, and activating Thermal Technology Heating System from clim8®, the strength of Durahide™ cowhide, ultimate insulation from 133g PrimaLoft® Gold and maximum knuckle protection from 4mm D3O®. This glove combines revolutionary technology, materials, and protection to ensure that you are warm and can work in the harshest winter conditions. Usage, heat settings, and general wear may effect run timeFEATURES:• clim8® intelligent Thermal Technology Heating System that automatically turns on when glove is placed on hand• Hand temperature can be set from 68-95°F with clim8® technology• Heating system adjusts and regulates internal temperature based on body and outside temperatures for optimum hand warmth & temperature at all times• Includes: (2) 7.4V, 3000 mAh Lithium-ion batteries and (1) 100-240V AC to DC 8.4V, 2A charger• Easily accessible waterproof battery pouch for easy charging and connectivity• Downloadable companion app for ability to personalize and easily adjust the thermal comfort to your exact needs• Indicator light that notifies users when the glove is actively heating• Built with Super soft Durahide™ Cow hide glove with heavy duty nylon stitching throughout for maximum strength• Insulated with 133g PrimaLoft® Gold throughout for ultimate insulation in the most extreme conditions• 4mm D3O® padding on knuckles and back of hand for increased impact protection• Reflective Piping on back of hand for high visibility at night• Ergonomic palm design and hot stamp texture for maximum grip• Touchscreen capable finger to ensure you are always connectedIntended Uses• Maintenance & Repair• Snow Removal• Towing & Transport• Construction

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical dataDimensions (L x W x H)100 x 100 x 0,5mmThermal conductivity7W/mKColorpink

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical dataDimensions (L x W x H)100 x 100 x 1mmThermal conductivity7W/mKColorpink

Stannol KS115 electronic solder wire has been designed for the special requirements of lead-free soldering. It is suitable for industrial manufacturing as well as for rework and repair. Stannol solder wire KS115 contains a rosin-free, halide activated synthetic resin. The flux formulation of KS115 is classified to DIN EN 29454-1 Type 1.2.2.B. Due to its high activity (1.5%), the flux is classified as REM1 to IEC 61190-1-3. Alloy: 99% tin, 1% copper Melting point 227°C Active flux for fast wetting of solder pads and pins Bright amber residues with low thermal decomposition at soldering temperatures Solid residues with high softening point Low fuming Low spitting Available in a range of diameters and pack sizes Seos DIN EN 29454-1 Fluksipitoisuus Fluksikanavien määrä KS100 1.2.3 3,0 % 1 KS110 1.2.2 3,0 % 1 KS115 1.2.2 3,0 % 1

Stannol KS115 electronic solder wire has been designed for the special requirements of lead-free soldering. It is suitable for industrial manufacturing as well as for rework and repair. Stannol solder wire KS115 contains a rosin-free, halide activated synthetic resin. The flux formulation of KS115 is classified to DIN EN 29454-1 Type 1.2.2.B. Due to its high activity (1.5%), the flux is classified as REM1 to IEC 61190-1-3. Alloy: 99% tin, 1% copper Melting point 227°C Active flux for fast wetting of solder pads and pins Bright amber residues with low thermal decomposition at soldering temperatures Solid residues with high softening point Low fuming Low spitting Available in a range of diameters and pack sizes Seos DIN EN 29454-1 Fluksipitoisuus Fluksikanavien määrä KS100 1.2.3 3,0 % 1 KS110 1.2.2 3,0 % 1 KS115 1.2.2 3,0 % 1

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical dataDimensions (L x W x H)120 x 20 x 1mmThermal conductivity7W/mKColorpink

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical dataDimensions (L x W x H)120 x 20 x 1,5mmThermal conductivity7W/mKColorpink

Alphacool's ultimate solution for cooling your computer with a layer of ice. Not a layer of ice in the traditional sense made of frozen water, but a layer that will freeze any chip. The properties of the new thermal pads speak for themselves.The "Alphacool ice layer" offers all the advantages and typical properties of a thermal pad: self-adhesive, elastic, adaptable and much more! The area of application is just as versatile, whether for RAM and mainboard coolers or graphics card and CPU coolers, wherever the circuit board meets the heat sink, the Alphacool ice layer is a good choice.The Ice Layers Light are available in the 7W/mk power level in 0.5mm, 1mm and 1.5mm thicknesses. Perfect for compensating for height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers). These can be easily separated with scissors to individually adjust the right size for each component Technical dataDimensions (L x W x H)14 x 14 x 1mmThermal conductivity7W/mKColorpink

The Eisschicht from Alphacool can, like other thermal pads, compensate for the irregularities of heat sinks and the elements to be cooled. But it has a great feature: The Eisschicht consists of thermal paste with an embedded mesh! This ensures that the performance of these pads is much more efficient than normal thermal pads, regardless of the low W/mK value. In addition, a better distribution and filling between the surfaces is achieved. This also results in better air displacement. Due to their soft consistency, there is also no pressure on components or solder joints. Nvidia also uses this kind of pads for the Founders Edition. The Eisschicht can be easily cut to the desired size and attached to heat sinks without slipping.As a basic component or spare part, thermal pads belong in every well-organized computer tinkering corner! Technical dataDimensions (L x W x H)100 x 100 x 1mmThermal conductivity3 W/mKElectrical ConductiveNoColorwhite

The Alphacool Eisschicht Ultra Soft are the ultimate in thermal pads. Their outstanding properties mean they can almost be compared to thermal paste. The Eisschicht Ultra Soft pads fit much better to components, which contributes to excellent cooling performance.Better than standard thermal pads?The ultra-soft material of the Eisschicht Ultra Soft thermal pads acts in a similar way to thermal paste. While normal thermal pads are simply pressed together by the contact pressure, which can lead to uneven contact pressure on components of different heights, this is almost impossible with the Eisschicht Ultra Soft thermal pads. The material spreads as well as thermal paste and thus prevents the highest components from being subjected to increased contact pressure from the cooler. In the worst case, this can lead to the PCB bending. The soft consistency also fills in any uneven areas much better. The Eisschicht Ultra Soft thermal pads therefore cling much better to the components, which of course benefits heat transfer.But that’s not the only advantage!The special material also cannot dry out. Usually the silicone in thermal pads bleeds over time. This causes them to become hard and the performance of the pads drops rapidly at a certain point. This is not the case with the Eisschicht Ultra Soft thermal pads. They can be used for a much longer period of time without losing any significant performance.A thermal pad with fabric?The consistency of the heat-conducting material is similar to a viscous thermal paste. A special fabric is embedded so that the material remains stable and can be used as a thermal pad. This ensures perfect distribution of the material if the element to be cooled has an uneven shape. Examples of this include voltage converters, VRam and similar electronic components of all kinds that require cooling.Cropping? No problem!When cutting the thermal pads, you should definitely leave the foil on the pads. This means that the pads can be easily cut to size with scissors. It's just as easy as cutting paper. The cut edges stay perfectly clean and don't fray.The Alphacool Eisschicht Ultra Soft thermal pads are superior to the usual thermal pads in many ways and are also used in all new Eisblock Aurora graphics card coolers from Alphacool. Technical dataDimensions (L x W x H)100 x 100 x 3mmThermal conductivity3 W/mKElectrical ConductiveNoColorwhite

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler.Compatibility:- NVIDIA GeForce RTX 3090 Ti Founders Edition Technical data cooler L x W x H 220,5 x 146,40 x 23,35 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 11 Maximum working temperature 60 °C Pressure tested 0,8 Bar Technical data backplate L x W x H 220 x 121,4 x 6 mm Material aluminium Color black

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 2mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 0,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 2mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 3mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H) 120 x 20 x 1,5mm Thermal Conductivity (ASTM D5470) 6.2 W/mK (±10%) Hardness (ASTM D412) 50 (Shore 00) (±15) Working temperature -50 to ~150°C Volume Resistance (ASTM D257) 1×10¹³ Ohm-m Dielectric Breakdown Voltage (ASTM D149) 6 KV/mm (±10%) Density (ASTM D792) 3.1 g/cm³ (±10%) Elongation (ASTM D412) 50% Weight Loss (ASTM E595) less than 1% Flame Rating (UL 94) V-0 Color blue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H): 120 x 20 x 0,5mm Thermal Conductivity (ASTM D5470): 9.0 W/mK (±10%) Hardness (ASTM D2240): 50 (Shore 00) (±15) Working temperature: -50 to ~180°C Volume Resistance (ASTM D257): 1×10¹² Ohm-m Dielectric Breakdown Voltage (ASTM D149): ≥8 KV/mm Density (ASTM D792): 3.2 g/cm³ (±10%) Elongation (ASTM D412): 40% Weight Loss (ASTM E595): less than 1% Flame Rating (UL 94): V-0 Color: pink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H): 120 x 20 x 1mm Thermal Conductivity (ASTM D5470): 9.0 W/mK (±10%) Hardness (ASTM D2240): 50 (Shore 00) (±15) Working temperature: -50 to ~180°C Volume Resistance (ASTM D257): 1×10¹² Ohm-m Dielectric Breakdown Voltage (ASTM D149): ≥8 KV/mm Density (ASTM D792): 3.2 g/cm³ (±10%) Elongation (ASTM D412): 40% Weight Loss (ASTM E595): less than 1% Flame Rating (UL 94): V-0 Color: pink

Alphacool's double-sided adhesive Core thermal pad can be used to cool electronic components of all kinds where it is important to effectively dissipate waste heat. This significantly improves the performance and durability of the components. The assembly is significantly simplified by the material-related tackiness.Flexible and PowerfulDue to its material composition, the thermal conductive pad is reliable and powerful. With its low thickness, it offers a wide range of application possibilities. It can be flexibly cut to size for individual needs. The adhesive nature allows effortless mounting of electrical components such as DDR modules, motherboard components or power supplies. Technical dataDimensions (L x W x H)50 x 50 x 0.25mmThermal Conductivity (ASTM D5470)1 W/mK ±10%Thickness (ASTM D374)0.25 mmReinforcement CarrierFiberglass meshContinuous Working Temperature-30~+120 °CShort time use temperature (30sec)180 °CDensity (ASTM D792)1.2 g/cm³Holding Power 1000g@25° Cusing 1 in² (PSTC-7)>3000 min180° Peeling Strength (aluminum) (PSTC-101)>16 N / 25mmDielectric Breakdown Voltage (AC) (ASTM D149)3 KV ±10%Thermal Impedance @10psi (ASTM D5470)1.26 C-in² / WThermal Impedance @30psi (ASTM D5470)1.06 C-in² / WThermal Impedance @50psi (ASTM D5470)1.05 C-in² / WColorwhite

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 2mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 3mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Do you love hiking with your dog? Even on frosty winter days? By putting the waterproof Hurtta Extreme Warmer jacket on your furry friend, you’ll ensure that low temperatures and moisture won’t be a problem. It has been specially designed for dogs that love to spend active time outdoors. The modern design and very high quality of workmanship meet the demands and expectations of even the most discerning users. The jacket perfectly protects your pet from low temperatures, wind, and moisture. It is tailored and fits well, allowing for freedom of movement and providing maximum comfort. It is made from a soft fabric that gently wraps around your dog’s body. A thick layer of padding inside ensures protection against the cold. Easy to put on and take off, loops around the back legs prevent twisting and slipping. A special flap protects your furry friend's belly. The high collar and hood protect the neck, head, and ears from the cold. Adjustments around the collar and back length allow for a perfect fit to your pet's body structure. Reflective piping and large prints made with 3M technology ensure visibility in difficult weather conditions. An opening on the back allows for harness placement underneath and leash attachment. Special snaps allow you to secure the jacket flaps at the back, preventing the garment from dragging on the ground for dogs with short legs.. A unique feature of the Extreme Warmer jacket is the use of modern technology in the lining construction. It is covered with a special aluminum foil print that works like a thermal blanket for athletes. The purpose of this lining is to maintain your dog’s body temperature at the correct level and protect against hypothermia. Thanks to its warming properties, the jacket can be successfully used on sporting dogs to prepare their bodies for exertion, as well as afterward to ensure comfortable rest.. The jacket is made with attention to every detail: made from soft and pleasant-to-touch waterproof fabric with a lining that maintains body temperature, reflective piping and 3M prints for visibility, loops for back legs, high collar with a tricot collar for ears and head, adjustable collar circumference and back length, belly flap protection, opening for harness and leash, tear resistance: 15N, waterproofness: above 10,000mm water column, coverage of the dog: approx. 80% with warm filling of 120–140g/m2, light intensity of reflective elements 400-450 lx/m2, temperature: from -5 to -30°C, quality and durability for years, color: black.. About the brand: Hurtta is a leader among manufacturers of the highest quality harnesses, leashes, collars, harnesses, and clothing for active dogs. A well-known and respected company that was established in 2002 in Finland. Its ergonomic and extremely useful training and sports accessories are loved by people all over the world. The original style, modern design, and the unique material Haundtex®, patented by this manufacturer, ensure comfort, convenience, and an impressive appearance for dogs. Products from this brand are characterized by excellent quality, durability, and functionality. Physically active dog owners appreciate the ability to use Hurtta accessories both during walks and while engaging in sports such as running or dog trekking.

Do you love hiking with your dog? Even on frosty winter days? By putting your furry friend in the Hurtta Extreme Overall waterproof suit, you will ensure that low temperatures and moisture are no longer a concern. It has been specially designed for dogs that love to spend active time outdoors. The modern design and very high quality of workmanship meet the demands and expectations of even the most discerning users. The suit perfectly protects the animal from low temperatures, wind, and moisture. Tailored and well-fitted, it does not restrict the dog's movements and provides maximum comfort. It is made from a soft and pleasantly enveloping fabric. A thick layer of padding inside provides protection against the cold. Easy to put on and take off, it fastens with a convenient zipper. The flap at the bottom protects against drafts and moisture. Flexible, adjustable cuffs snugly wrap around the dog's paws, preventing snow from getting inside the sleeves. The high collar and hood protect the neck, head, and ears of the dog from the cold. Adjustments around the collar and in the back length allow for size customization to fit the dog's body structure. Reflective piping and large prints made with 3M technology ensure visibility in difficult weather conditions. An opening in the back allows for the attachment of a harness underneath and the leash. A unique feature of the suit is the use of modern technology in the construction of the lining. It is covered with a special print made from aluminum foil, functioning like a thermal blanket for athletes. The purpose of such a lining is to maintain the dog's body temperature at the correct level and protect against cooling. Thanks to its warming properties for the dog's muscles, the suit can be successfully put on sporting dogs to prepare their bodies for exertion, as well as after, to ensure comfortable rest. The suit is made with attention to every detail: made from soft and pleasant-to-touch waterproof fabric with a lining that maintains body temperature, reflective piping and 3M prints for visibility, with flexible, adjustable snap cuffs, a high collar with a tricot hood for the ears and head, adjustments for collar circumference and back length, a zipper with a windproof cover, an opening for the harness and leash, tear resistance: 10N, waterproof rating: above 10,000mm water column, coverage of the dog: approx. 90% with warm filling of 120–140g/m2, light intensity of reflective elements 400-450 lx/m2, temperature: from -5 to -30°C, quality and durability for years, color: black.. About the brand: Hurtta is a leader among manufacturers of high-quality harnesses, leashes, collars, harnesses, and clothing for active dogs. A well-known and respected company that was established in 2002 in Finland. Its ergonomic and extremely useful training and sports accessories are loved by people all over the world. The original style, modern design, and the unique material Haundtex®, patented by this manufacturer, ensure comfort, convenience, and an impressive appearance for dogs. Products from this brand are characterized by excellent quality, durability, and functionality. Physically active dog owners appreciate the ability to use Hurtta accessories both during walks and while engaging in sports such as running or dog trekking.

Do you love hiking with your dog? Even on frosty winter days? By putting your furry friend in the Hurtta Extreme Overall waterproof suit, you will ensure that low temperatures and moisture are no longer a concern. It has been specially designed for dogs that love to spend active time outdoors. The modern design and very high quality of workmanship meet the demands and expectations of even the most discerning users. The suit perfectly protects the animal from low temperatures, wind, and moisture. Tailored and well-fitted, it does not restrict the dog's movements and provides maximum comfort. It is made from a soft and pleasantly enveloping fabric. A thick layer of padding inside provides protection against the cold. Easy to put on and take off, it fastens with a convenient zipper. The flap at the bottom protects against drafts and moisture. Flexible, adjustable cuffs snugly wrap around the dog's paws, preventing snow from getting inside the sleeves. The high collar and hood protect the neck, head, and ears of the dog from the cold. Adjustments around the collar and in the back length allow for size customization to fit the dog's body structure. Reflective piping and large prints made with 3M technology ensure visibility in difficult weather conditions. An opening in the back allows for the attachment of a harness underneath and the leash. A unique feature of the suit is the use of modern technology in the construction of the lining. It is covered with a special print made from aluminum foil, functioning like a thermal blanket for athletes. The purpose of such a lining is to maintain the dog's body temperature at the correct level and protect against cooling. Thanks to its warming properties for the dog's muscles, the suit can be successfully put on sporting dogs to prepare their bodies for exertion, as well as after, to ensure comfortable rest. The suit is made with attention to every detail: made from soft and pleasant-to-touch waterproof fabric with a lining that maintains body temperature, reflective piping and 3M prints for visibility, with flexible, adjustable snap cuffs, a high collar with a tricot hood for the ears and head, adjustments for collar circumference and back length, a zipper with a windproof cover, an opening for the harness and leash, tear resistance: 10N, waterproof rating: above 10,000mm water column, coverage of the dog: approx. 90% with warm filling of 120–140g/m2, light intensity of reflective elements 400-450 lx/m2, temperature: from -5 to -30°C, quality and durability for years, color: black.. About the brand: Hurtta is a leader among manufacturers of high-quality harnesses, leashes, collars, harnesses, and clothing for active dogs. A well-known and respected company that was established in 2002 in Finland. Its ergonomic and extremely useful training and sports accessories are loved by people all over the world. The original style, modern design, and the unique material Haundtex®, patented by this manufacturer, ensure comfort, convenience, and an impressive appearance for dogs. Products from this brand are characterized by excellent quality, durability, and functionality. Physically active dog owners appreciate the ability to use Hurtta accessories both during walks and while engaging in sports such as running or dog trekking.

RIGHT SIZES SMOOTHER MOVEMENTWith the 250mm size, the DASHER MINI SLIM allows easy storage and you can bring it to anywhere you like! In addition, these mouse pads were created with solid sewing edge of the mouse pad ensures long-term durability, preventing peeling or warping problem for you to move your mouse smoothly with consistency!SPEED-TYPE STUNNING MOUSE PADTt eSPORTS's Speed-type mouse pads are incredibly smooth and flat. It allows gamers to have precise movements with comfortable feeling (FPS & RTS & MMORPG Games). Speed-type mouse pads best suit gamers who need to hit targets faster and more efficiently!SEMI-COARSE TEXTURed WEAVE MOUSE PADA smooth surface designed to allow you almost effortless mouse movement. DASHER new edition mouse pads deliver excellent glide characteristics that offer total tracking responsiveness for consistently reliable in-game control!ANTI-SLIP RUBBER BASEA special non slip rubber base ensures that DASHER New Edition mouse pads will not slip as you game, even in the most intense of battles. Play with confidence and never worry about mouse pad lift-off or slipping again - even on glass desks!SpecificationDimension (L x B x H): 250 x 210 x 4 mmMaterial: Cloth Weave MaterialBase: Polyurethan Genre: FPS, RTS, MMORPGColor: BlackOther Features. Ideal for Game Genre requiring rapid movement from point A to point B Type Mouse Pad Material Synthetic Fibre Colour Black Width (mm) 250 Height (mm) 2 Depth (mm) 210

Thermaltake kaitsekest LUXA2 case Lucca iPad mini leather stand must

Thermaltake kaitsekest LUXA2 case Lucca iPad mini leather stand punane

Efficient Thermal ConductivityThe Thermal Pad based on silicone and a special filler outperforms generic and performance pads by far.Filling the GapsDue to its low hardness and great compressibility, the thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.Easy to ApplyInstalling the ARCTIC Thermal Pad is child's play; perfect for beginners..Safe HandlingThe Pad does not contain any metallic particles, is electrically isolating and not capacitive. The handling is safe as contact with any electrical traces would not result in damage of any sort.Toote värvSinineMaterjalSilikoonPakendi laius195 mmPakendi kõrgus210 mmPakendi kaal45 gLaius145 mmSügavus0,5 mmKõrgus145 mmKaal41 g

Thermaltake hiir eSPORTS Mouse Talon X + mousepad