Otsing: usb 3.0 2.5

Horizon ARGB FLOW Midi White Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.

Transcend kõvaketas StoreJet 25A3 2,5" 1TB HDD USB 3.0, Mõõtmed: 130.6mm x 80.1mm x 15.0mm, Kaal: 182g, 2.5" SATA HDD, Liidesed: USB 2.0/3.0

Internal 1x 2.5 "/3.5" (transverse, hard disk cage), 1x 3.5 "(transverse, hard disk cage), 3x 2.5", Front I / O 2x USB-A 3.0, 1x USB-A 2.0, 1x microphone, 1x headphones, PCI slots 7, Fan (front) 1x 120mm (RGB illuminated) or 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm (optional), Fan (top) 2x 120mm (optional), Radiator sizes 120 / 240mm front, 120mm rear, Mainboard to ATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6"), Power supply ATX (max.173mm deep), PSU position below, CPU cooler max. 166mm height, Graphics cards max. 325mm (without radiator), Color black, inside black, Lighting illuminated fan, Dimensions (WxHxD) 218x445x409mm, Volume 39.68l, Enclosure type miditower, Special features Cable management, dust filter, window made of glass, w/o psu, AEROPGSZAURON-FRGB-G

AMD B850 | SAM5 | ATX | DDR5 | 8200/8000/7950/7900/7800/7600/7400/7200/7000/6800/6600/6400/5800/5600/5200/4800/4400 MHz | Memory slots 4 | 2xPCI-Express 3.0 1x | 3xM.2 | 1xHDMI | 1xDisplayPort | 5xUSB 2.0 | 3xUSB 3.2 type B | 2xUSB 3.2 | 2xUSB-C | 1xPS/2 | 1xOptical S/PDIF | 1xRJ45 | SATA | USB-C | USB 2.0 | USB 3.2 | Bluetooth | WiFi | Video Depending on CPU | Audio | LAN 2.5 Gigabit | RAID SATA 0, 1, 10; NVMe 0, 1, 5, 10 | TPM Header

AXAGON PCEU-43RS PCI-Express card adds four external USB 3.2 Gen 1 ports to your desktop computer. The card is designed for fast data transfers at speeds up to 5 Gb/s. All four SuperSpeed USB ports are taken out to the bracket. The dual power supply of the controller enables standard power supply of the controller and connected USB peripherals via the PCI-Express bus as well as optional power supply from the PC power supply via the SATA power connector. The USB controller is equipped with a renowned Renesas company chipset with proven seamless compatibility, high performance and UASP support. Low profile bracket is included in the package for mounting the adapter into low profile cases. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1 / 3.0. Number of lines: 1-Lane (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus is 5 Gb/s. Output: 4x external USB 3.2 Gen 1 port with USB type A-F connectors. SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 a USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s (super / high / full / low speed). When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Standard power supply for the controller and connected USB peripherals via the PCI-Express bus. In this power supply mode, the PCIe controller can handle up to three magnetic 2.5" external disks simultaneously. Optional power supply from PC source via SATA power connector. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10 / 11, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express controller with a standard bracket, low-profile bracket multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Green Cell Power Bank, PBGC03SW, PowerPlay 20000mAh, 22.5W (white). The PowerPlay20s powerbank allows you to charge your devices faster and more efficiently with 22.5W of power. With a capacity of 20000mAh, the powerbank provides enough energy to quickly charge all your mobile devices. With USB-C2 with Power Delivery, USB-C3 and USB-A ports with QuickCharge 3.0, it provides faster charging and compatibility even with devices with high power requirements. Low Power Mode prevents the device from shutting down on its own when charging low-power devices, and durable lithium-polymer cells guarantee long life, retaining up to 70% of initial capacity even after 300 charging cycles. More USB-C ports With more USB-C ports supporting higher charging powers and ensuring compatibility with the latest standards, the PowerPlay20s powerbank can definitely do more. It provides efficient and fast charging for several devices simultaneously. So you only need one device to support all your devices! Great power - even for small devices The new Low Power Mode function ensures that the powerbank will not shut down while charging devices with low power requirements. Low Power Mode runs for 2 hours and then switches to standard mode, which is enough to charge small electronics and at the same time ensures that the powerbank will not discharge itself. Press the button 2 times to activate the mode to prevent the powerbank from shutting down on its own, and seamlessly charge your smartwatches or headphones. Unlimited compatibility for all your devices The PowerPlay20s offers multi-protocol compatibility, allowing you to charge virtually any device. From watches to smartwatches, iPads, cameras and more, you can always count on reliable power for your gear. Durability impacting everyday use The lithium-polymer cells used have an excellent lifespan, retaining 70% of their initial capacity after 300 charging cycles. It's like charging your iPhone 15 1350x and still being able to use the powerbank freely. You'd sooner replace your phone with a new one than think about a new powerbank! Charge without worrying The capacious Green Cell PowerPlay20s powerbank is not only about the convenience of fast charging. It uses advanced electronic components that constantly watch over the device's operation to ensure absolute safety at all times. The powerbank intelligently adjusts the power to the connected devices, and also monitors the operating temperature. Style that expresses your uniqueness In addition to the version in classic Panther Black, there is now also a choice of a Snow White housing variant. Choose the color that suits your lifestyle, emphasize your individuality. Most importantly: color goes hand in hand with technology. The polymer used to create the case is self-extinguishing (non-flammable), making the PowerPlay20s combine unconventional design with a high level of safety. ManufacturerGreen CellModelPowerPlay20sManufacturer codePBGC03SWColorWhite - Snow WhiteCapacity20000 mAhPower22.5 WCell typeLi-PolymerNumber of outputs3InputUSB-C1/C2: 5V/3A, 9V/2A, 12V/1.5A (Max. 18W)OutputUSB-C2: 5V/3A, 9V/2.23A, 12V/1.67A (Max. 22.5W) + (PPS 5~11V，20mV/step); USB-C3/A1: 5V/3A, 9V/2A, 12V/1.5A (Max. 18W)Fast charging technologyGreen Cell Ultra ChargeCompatible fast charging technologiesPower Delivery 2.0 / 3.0, Quick Charge 2.0 / 3.0, FCP / AFC / SFCP, Support low / high voltage SCP, MTK PE 1.1 & 2.0, USB C DRP, BC 1.2 / Apple / Samsung, PPS support 5~11V adjustable voltage with 20mV / StepPass-ThroughYesProtection against overheatingTakDeep discharge protectionTakOvercharge protectionTakCharging of devices with low power consumptionYes; Low Power Mode activated by pressing the GC logo twiceDimensions139.8 x 72.3 x 24.8 mmWeight450 g

Key Features - AMD Socket AM5:Supports AMD Ryzen™ 9000 / 8000 / 7000 Series Processors - Digital twin 16+2+2 phases VRM solution - Dual Channel DDR5:4*DIMMs with AMD EXPO™ Memory Module Support - WIFI EZ-Plug: Quick and easy design for Wi-Fi antenna installation - EZ-Latch Plus: PCIe and M.2 slots with Quick Release & Screwless Design - EZ-Latch Click:M.2 heatsinks with screwless design - Sensor Panel Link: Onboard video port for hassle-free in-chassis panel setup - Friendly UI: Multi-Theme, AIO Fan Control, and Q-Flash Auto Scan in BIOS and SW - Ultra-Fast Storage:4*M.2 slots, including 3* PCIe 5.0 x4 - Efficient Thermal: VRM Thermal Armor Advanced & M.2 Thermal Guard L - Fast Networking:2.5GbE LAN & Wi-Fi 7 with directional Ultra-high gain antenna - Extended Connectivity:Dual USB4 Type-C with DP-Alt, HDMI - Reliable Audio:Realtek ALC1220 HD Audio & Audiophile Grade Capacitors - Ultra Durable PCIe Armor : The metal back plate of PCIe x16 slot for enhanced durability - PCIe UD Slot X: PCIe 5.0 x16 slot with 10X strength for graphics card, AMD X870E | SAM5 | ATX | DDR5 Memory slots 4 | 1xPCI-Express 3.0 2x | 1xPCI-Express 4.0 4x | 1xPCI-Express 5.0 16x | 4xM.2 | 1xHDMI | 4xUSB 2.0 | 6xUSB 3.2 | 2xUSB-C | 1xOptical S/PDIF | 1xRJ45 | 2xAudio port | SATA | USB-C | USB 2.0 | USB 3.2 | Bluetooth | WiFi | Video Depending on CPU | Audio Realtek ALC1220 | LAN 2.5 Gigabit | RAID SATA 0, 1, 10; NVMe 0, 1, 5, 10 | TPM Header

Hohem iSteady M7 GimbalHohem iSteady M7 is an advanced gimbal created for demanding users who want the highest quality stabilization and functionality. Thanks to its design, support for a wide range of smartphones and innovative technologies, it will work perfectly in the hands of both amateurs and professionals.Impressive iSteady 9.0 stabilizationOne of the iSteady M7's greatest strengths is its 9.0 stabilization system, which ensures smooth and stable shots even during dynamic movements. It's ideal for recording in motion - from fast-paced action scenes to precise slow-motion shots. The stabilization works even at high speeds, making it easy for users to achieve professional results without extra effort.Innovative AI Tracker functionThe gimbal is equipped with a dedicated AI Tracker module, which enables intelligent real-time tracking of objects and people, regardless of the application being used. This feature is particularly useful when recording vlogs, live broadcasts or dynamic scenes, where precise frame tracking plays a key role.Full control with detachable touch screenThe iSteady M7 is also distinguished by an innovative detachable touchscreen, which allows convenient operation of the gimbal's functions. This allows the user to control the recording parameters in real time and adjust the settings according to their needs, greatly enhancing the user experience.Expanded versatility and performanceThe gimbal supports smartphones weighing up to 500g and supports foldable devices. The built-in 19.8 cm long boom allows you to capture more interesting shots and more easily create content from different perspectives. It is complemented by RGB and dual-color LED lights, which offer extensive lighting capabilities that are useful when working in difficult lighting conditions.Long-lasting operation and chargebackThe long-lasting battery provides up to 16 hours of operation, and the charge-back function allows you to charge connected devices such as a smartphone. This is ideal for those who want to remain fully mobile and independent during long recording sessions.Compact kit with extensive featuresThe Hohem iSteady M7 comes with a set of accessories in a sturdy case for easy storage and transportation. Among other things, the kit includes a tripod, charging cable and detachable touchscreen, allowing you to start working immediately after unpacking the product.IncludediSteady M7 x1Advanced Al Tracker with fill light x1Detachable remote control with touchscreen x1Tripod x1Carrying case x1USB type C charging cable x1USB type C to C charging cable x1Quick start guide x1Warranty card x1Safety guidelines x1 ManufacturerHohemModeliSteady M7 GimbalWeightGimbal: 629g(±5g), Tripod: 118.5gDimensionsUnfolded: 327*122.3*118.3mm, Folded: 335.7*57*159mmMaterialHigh-performance composite materialMaximum load500gSmartphone width58mm~90mmThickness of the smartphone6.9mm~12.5mmBattery Capacity18650li-ion, 7.2V/3200mAh/23.04WhOperation timeAbout 12 hours (balanced and stationary), About 8 hours (with Al tracking), 3 ~ 4 hours (with simultaneous Al tracking and fill light), *Data is from Hohem LaboratoryPower consumption1.8 watts (balanced and stationary)Charging time3 hoursControlled anglePan rotation: 360° at infinity, Roll rotation: +45°, Tilt (Tilt): -50°~275°Operating temperature-10°C~45°CMotor protectionThe gimbal will automatically shut down in case of malfunction to protect the motor. Remote controlBattery capacity3.8V/240mAh/0.912WhRemote control range≤ 10mVideo transmission≤ 7mTouch screen1.4 inches AI trackerWeight20gDimensions42.5*29.5*19.5mmPixels2 MPGesture recognition range0.5m~5mFollow range0.5m~7mIllumination40lux@0.5mLight power2WRGB360 lighting colorsCCT2700K, 3000K, 3500K, 4000K, 4500K, 5000K, 5500K, 6000K, 6500K

The Krux Helio is a compact microATX case featuring a modern design with dark wood accents on the front, inspired by the Palum model. Its appearance makes it a great fit for offices, living rooms, or gaming setups. Despite its small size, it offers space for up to eight 120mm fans (three at the front, two at the bottom, two at the top — 140mm also possible — and one at the rear), and it comes with a 120mm PWM fan pre-installed at the back. A tempered glass side panel provides a view of the interior, while rounded edges emphasize its modern look. Thoughtfully designed dust filters and an easily removable front panel simplify cleaning and fan installation. Inside, it accommodates graphics cards up to 320mm, power supplies up to 170mm, and CPU coolers up to 175mm. There are also mounts for two 3.5" and one 2.5" drives, as well as radiator support up to 280mm. The I/O ports are located on the lower side and include USB-C 2.0, USB-A 3.0, a 3.5mm combo audio jack, as well as power and reset buttons — especially convenient if the case is placed on a desk.

The IT-5905 is a modern Midi-Tower with a robust and compact design. It knows to convince due to its user-friendly assembly of front connectors in the upper part of the front panel.Besides the design, the IT-5905 convinces with space for up to four optional coolers, several mounting options for 3.5" and 2.5" HDD´s and space for graphics cards with a length of 32cm.Two USB 3.0 front connectors and a depot in the cap (for USB-sticks for example) complete the offer and make this case a real all-rounder.KujutegurMiditornTüüpPC5,25" lahtrite arv33,5" lahtrite arv4Emaplaadi toetatud kujuteguridATX,Micro-ATXToote värvMustAknagaJah2,5" salvede arv2Sisemiste 3,5" salvede arv3Väliste 5,25" kettalahtrite arv3SobilikKodu/kontorGraafikakaardi maksimaalne pikkus32 cmKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt120 mmMaksimaalne küljeventilaatorite arv2Toetatud küljeventilaatorite läbimõõt120 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt80,120 mmToetatud kõvakettasuurused2.5,3.5"JuhtmehaldusJahLähtestusnuppJahLaius200 mmSügavus415 mmKõrgus410 mm

Mini Tower, microATX, 4x Expansion slots, 2x5.25", 1x3.5", 2x3.5", 1x2.5", 1xUSB 3.0, 2xUSB 2.0, Mic, Audio, 425x180x352mm, CT-01B-350GPB

External HDD Verbatim Store & Go 2.5" 2TB USB3, hõbednae

Tootja: Natec Tootegrupp: USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station liides: USB 3.0 seadme suurus: 2.5 tolli seadme liidesed: SATA III toetatud seadmed: Hard disk, SSD toiteplokk: USB laius: 78 mm kõrgus: 12.3 mm sügavus: 130 mm

Internal 2x 2.5 "/3.5", Front I / O 2x USB-A 3.0, 1x USB-A 2.0, 1x headphones, 1x microphone, PCI slots 7, Fan (front) 3x 120mm (RGB illuminated), Fan (rear) 1x 120mm (RGB illuminated), Fan (top) 2x 120mm (optional), Radiator sizes 240mm front, 240mm top, Motherboard up to ATX, Power supply ATX (max 200mm deep), Power supply position below, CPU cooler up to max. 166mm height, Graphic cards up to max. 349mm, Color black, black painted inside, Dimensions (WxHxD) 203x505x436mm, Volume 44.70l, Weight 6.90kg, Special features Cable management, glass viewing window, GL-02B-OP

USB3.0 Portable Hard Drive, Blue color box

LaCie kõvaketas Rugged Mini 2.5" 5TB USB3.0

DIMENSIONS : (D)420mm X (W)269.5mm X (H)380mm MOTHERBOARD : E-ATX (Max 280 mm wide)/ATX/ Micro-ATX/ Mini-ITX PSU : SFX/ SFX-L MATERIAL : Steel 4 mm Tempered Glass 2mm Aluminum (top and left panel) FAN SUPPORT : Top: 3x 120mm or 2x 140mm Side: 2x 120mm or 2x 140mm Bottom: 3x 120mm or 2x 140mm Rear: 1x 120mm RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE : 395mm CPU COOLER HEIGHT CLEARANCE : 170mm VGA Length : 370mm DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD) EXPANSION SLOTS : 3 or 5 or 7 slots (depends on back panel) IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button DUST FILTERS : 1 x Top, 1 x Bottom, 2 x Side

TP-LINK AX6000 8-Stream Wi-Fi 6 Router with 2.5G Port Archer AX80 802.11ax, 4804+1148 Mbit/s, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 3, MU-MiMO Yes, No mobile broadband, Antenna type External, 1× USB 3.0 Port

IB-180MS-C31 Docking Station for NVMe M.2 SSD and SATA Drive with USB Type-C to Type-C/Type-A combo cable Versatile Compatibility - This adapter supports both M.2 NVMe/SATA SSDs and 3.5-inch/2.5-inch SATA III drives, providing flexibility for various storage needs. Connect any drive at any time with ease. High-Speed Data Transfer - Achieve lightning-fast data transfer speeds of up to 10 Gbit/s via the USB 3.2 Gen2x1 Type-C interface. This allows quick backups and efficient file transfers for all your tasks. On/Off Tact Switch - Easily switch between SSD and HDD with the simple press of a tact switch located on the front. This feature allows for quick changes to the drive interface without hassle. Connect to PC via USB Type-C - Equipped with a USB Type-C to Type-C/Type A combo cable, this adapter offers dual connectivity options. This enhances versatility for connecting to various device interfaces. Multi-OS Compatibility - Enjoy consistent performance with compatibility for both Windows and macOS environments. This makes it a reliable solution for connecting a variety of M.2 and SATA drives. Pro Tip: Connect and Power with USB - Power your M.2 and 2.5-inch drives using USB 3.0 or Type-C ports, eliminating the need for a power supply unit (PSU). Note that only 3.5-inch drives will require a PSU for operation.

Huion Inspiroy Frego S graphics tabletHUION Inspiroy Frego S is a graphics tablet for those who appreciate a clean workspace and simplicity. It supports Bluetooth 5.0 connection, allowing you to use the tablet without cables. Its compact size, light weight and robust battery (up to 24 hours of use on a single charge) make it great for everyday use. The compact size (220 × 165.7 mm), low weight (280 g) and built-in nylon stylus holder make the Inspiroy Frego S great for traveling.No cables, no limitationsYou can connect the tablet to your computer, laptop, smartphone or tablet via Bluetooth, giving you more freedom of action. When you need to work longer, you can always plug it in wired via USB. The fully charged battery allows you to work for up to 24 hours, and charges in just 2.5 hours. This makes the device suitable for both desktop and outdoor use.Phone and tablet compatibilityInspiroy Frego S works not only with Android devices, but also with iPhones and iPads,among others. through the HiPaint and ibisPaint apps. What's more, the side buttons on the stylus can be set as convenient shortcuts in these apps, such as eraser, undo or tool change, making creative work easier. When combined with HiPaint on an Android device, the tablet automatically adjusts the aspect ratio of the work area to match the phone or tablet screen. This avoids scaling issues and ensures accurate reproduction of movements.Lightweight stylus includedThe included slim stylus is only 9.5 mm in diameter. As a result, drawing is more natural and stable. You can choose between different tips - a standard one and a felt tip, which better reproduces the feel of a pencil on paper. Two programmable side buttons allow you to quickly switch between functions, making your work more efficient. PenTech 3.0+ technology allows the stylus to detect as many as 8192 levels of pressure and respond to any change in force or speed of movement. This allows you to achieve a variety of lines and effects - from light sketches to firm strokes.Refined to the last detailThe tablet's surface mimics the texture of paper, providing a natural drawing experience. This makes work more precise and less tiring for the hand. The gently sloping edges and the lower support for the wrist ensure that the hand does not get tired even during longer sessions, and thanks to the symmetrical design, the tablet is comfortable for both right- and left-handed users. The lack of function buttons on the case allows you to freely use your own keyboard and position the tablet as you are comfortable - without any restrictions.IncludedtabletstylusUSB-C cablestandard stylus tips x10user manual TabletManufacturerHUIONModelInspiroy Frego SDimensions220 x 165.7 x 8 mmWork surface160 x 100 mmWeight280 gTouch screen-InterfaceUSB-CAutomatic shutdownafter 15 minWireless connectionBluetooth 5.0Range5-10 mCharging timeapprox. 2.5 h (5V/1A); approx. 5 h (5V/0.5A)Operating timeapprox. 24 hBattery capacity1300 mAhCompatibilityWindows 7 or later (wired); Windows 10 or later 64-bit (wired and Bluetooth); macOS 10.12 (wired); macOS 10.13 or later (wired and Bluetooth); Android 6.0 or later (Bluetooth); ChromeOS 88 or later (wired and Bluetooth); Linux (Ubuntu 20.04 LTS) (wired) StylusModelPW550STechnologyPentech 3.0+Resolution5080 LPIPressure sensitivity8192 levelsTilt support-Detection height>10 mmReading speedWired: >300 PPS; Bluetooth: >133 PPSAccuracy+0.3 mm

Anycubic Kobra 3 V2 Combo 3D PrinterMeet the Anycubic Kobra 3 V2 Combo - a 3D printing kit that offers multi-color printing with active drying of the filament to ensure vivid, defect-free prints. The printer features an enhanced LeviQ 3.0 automatic leveling system with a 60mm Y-axis and SG15 bearings to ensure perfect adhesion and flawless first layers, while speeds of up to 600mm/sec and 20,000mm/s² acceleration reduce turnaround time for even the most demanding projects. Thanks to "plug & play" (an installation that, once connected to the hardware of your choice, requires no additional configuration or driver downloads), installation and initial startup take less than 15 minutes, while smart features such as resuming printing after power loss, filament detection and timelapse on the built-in 720 p camera ensure continuous and safe operation. The whole thing is complemented by the powerful Anycubic ecosystem, which gives you full control over every step of the printing process. Also included is the ACE Pro module, which takes care of proper drying of the filaments and allows 3D printing in multiple colors.A multicolor explosion of creativityThe Anycubic Kobra 3 V2 printer allows you to create extremely vivid models in four or as many as eight colors simultaneously thanks to the included ACE Pro module. In addition, the ACE Pro module guarantees the excellent quality of each print by ensuring that the filaments are properly dried. Whether you are preparing functional prototypes, artistic molds or precise conceptual models, the Kobra 3 V2 printer will expand your imagination without compromise.LeviQ 3.0 automatic levelingForget about tedious manual table calibration. The innovative LeviQ 3.0 system with a 60 mm Y-axis and SG15 bearings on the X-axis takes care of perfect alignment of each layer. Thanks to the elimination of offsets in the Z-axis, you will get reliable adhesion of the first layer, which significantly increases the success rate of prints even on the most geometrically complex projects.Express speed and reliable performanceYou no longer have to wait long to print your designs. The Kobra 3 V2 achieves a maximum print speed of up to 600 mm/sec (300 mm/sec by default) and acceleration of up to 20,000 mm/sec², resulting in a small boat model in less than 13 minutes. The improved nozzle effectively minimizes filament leakage, and the optimal width of the working tunnel ensures comfort when working on any project.Unpack and runAssembling and starting the printer takes less time than your morning coffee - the intuitive, simplified design allows you to start your first print in a quarter of an hour after unpacking. Sturdy twin pull bolts, a precision bearing system and a metal quick-release coupler guarantee the stability of the entire design and allow for instant nozzle changes when needed.Smart monitoring and safetyNo more running out of filament during printing or unexpected power interruptions. The Anycubic Kobra 3 V2 automatically resumes operation when power is restored, and a filament sensor detects the condition of the filament, alerting you to refill the material. A built-in 720p timelapse camera allows you to document the entire process, which is great for presenting orders or creating social media content.Full control in the Anycubic ecosystemWith Anycubic Slicer Next (based on the Orca engine), you'll prepare models for printing from the LAN, managing multiple projects simultaneously and skipping unwanted elements. Using Anycubic, you gain remote access to the printer, real-time progress monitoring and a time-lapse photography option. In addition, the Makeronline platform offers a rich library of ready-made models and one-click cutting and printing.Comprehensive feature setAnycubic Kobra 3 V2 Combo is more than a 3D printing kit. It's a tool that integrates top-notch automation, multicolor printing, active filament drying and intelligent software. With support for high drying temperatures up to 55 °C, a capacitive 4.3-inch touchscreen, and control via panel, app and USB, you have complete freedom to choose how and where to work on your designs.IncludedKobra 3 V2 printerAnycubic Color Engine Pro (ACE Pro) moduleprint headtouchscreenspool holdercable holdercleaning wiperscrew M2x14 x2screw M3x6 x4screw M4x16 x2screw M3x10M3x8 screwpower cable x2cable organizer x4signal cableUSB diskfilament tubeset of wrenchesallen screws 4.0, 3.0, 2.5, 2.0, 1.5sample of filamentnozzle cleanergreasecamerainstruction manual ManufacturerAnycubicModelK3VC-IP-OWeightCobra 3 V2: 9.37 kg, ACE Pro: 4.6 kgSupported materialsKobra 3 V2 supports only PLA, TPU, PETG, ABS materials. ACE Pro supports only PLA, PETG, ABS, ASA, PET, PA, PC, PP, HIPS materials.DimensionsKobra 3 V2: 452.9 x 504.7 x 483 mm; ACE Pro: 365.94 x 282.84 x 234.5 mmPower source400 WMulticolor printingStandard 4/8-color printingNozzleMaximum temperature 300℃Print size255 x 255 x 260 mmMaximum table temperature110℃Maximum print speed600 mm/secTouch screen4.3-inchActive dryingSupported, max. drying temperature 55°CAuto leveling modeLeviQ3.0 + no Z-axis offset + design optimizationNozzle diameterStandard 0.4mm, options: 0.25/0.6/0.8mmFilament detection and print resumeSupportedResume after power lossSupportedVideo monitoringStandard HD camera, supports 720PTimelapse modeSupportedAI detectionPrint error ("spaghetti") detectionObject skipping and area levelingSupportedLocal network modeSupportedControl and printing methodsPrinter, Anycubic Slicer Next, Anycubic application, USB (print only)

The AXAGON ACU-PQ67 GaN travel wall charger enables fast charging of up to two mobile devices at the same time. With a total output power of 67W, the charger can recharge laptops, tablets, phones, and other mobile devices at their maximum possible speed. The adapter is equipped with both a standard USB-A connector and a reversible USB-C connector.Its compact size and high performance are possible thanks to advanced GaN technology. Gallium Nitride components operate with high efficiency, allowing for high power output in a small size. The charger features a Power Delivery 3.0 / Quick Charge 4+ USB Type-C output and a Quick Charge 3.0 USB Type-A output, making it suitable for fast charging not just smartphones and tablets, but also laptops.Quick Charge 4+ technology enables up to 4x faster charging for phones compared to a standard USB charger. Power Delivery 3.0 technology supports fast charging for modern phones and enables up to 67W charging for recent laptops.Apple devices are supported for fast charging, with maximum power depending on the model: iPhone 12-15 support up to 20W, iPhone 16 and 16 Pro up to 24W, iPhone 13 Pro to 15 Pro and iPhone 17 up to 27W. Higher power is available for the iPhone 16 Pro Max up to 30W and iPhone 17 Pro and Pro Max up to 40W. The charger is also compatible with iPads and Apple MacBook Air and Pro laptops.Samsung Galaxy phones support Super Fast Charging up to 25W SFC for the Galaxy S20-S25 series and Z Fold and Z Flip foldable models. Selected Galaxy Ultra models and Galaxy Tab tablets support even faster charging, up to 45W SFC 2.0.The charger is also compatible with other brands such as Motorola, Google Pixel, Xiaomi, Honor, Oppo, OnePlus, Realme, and other popular phones and tablets. It is suitable for charging laptops with PD 3.0 technology up to 67W from brands like Lenovo, HP, Dell, Acer, Asus, and others.An advanced output protection system safeguards connected devices from damage. The charger's functions also automatically detect the connected device and select the optimal charging speed and process.The power adapter has a pleasant shape and compact size. Compared to standard charging adapters with the same specifications, this charger is up to half the size. The combination of compact dimensions made possible by GaN technology and a wide input voltage range makes this charger ideal for travel.Input: Input voltage AC 100V-240V / 1.8A / 50-60Hz (WIV function), supports multiple national power standards Two-pin Euro plug - integrated into the adapter bodyOutputs: USB-A port QC (phones) max. 30W: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A Charging technologies: QC 3.0, QC 2.0, AFC, SCP, FCP, SMART, Apple 2.4A USB-C port PD (laptops, phones) max. 67W: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.35A, PPS: 3.3-11V/5A Charging technologies: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC 2.0, SFC, AFC, SCP, FCP, SMART, Apple PDMaximum charger output when using multiple ports:2 devices connected simultaneously USB-C port PD = 45W MAX USB-A port QC = 12W MAXNote: When charging multiple devices simultaneously, the required power is shared dynamically between them. The allocated power may change during charging.Supported charging technologies: Standard charging for all devices supporting 5V and charging for Apple iPhone 5, 6, SE, 7. SMART - charging up to 5V/4.5A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A), and Apple 2.4A (iPad). FCP - fast charging via Huawei Fast Charge Protocol. SCP - fast charging (up to 25W) via Huawei SuperCharge Protocol. AFC - fast charging using Samsung Adaptive Fast Charging protocol. SFC - fast charging via Samsung Super Fast Charging and Super Fast Charging 2.0 protocols. QC - fast charging via Qualcomm Quick Charge 2.0, 3.0, and 4+ protocols. PPS - fast charging via Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - fast charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocols.Examples of supported phones, tablets, and laptops: SFC - fast charging (up to 25W) for Samsung Galaxy S20, S21, S22, S23, S24, S25 series, Note 10, 20 series, Z Fold 2, 3, 4, 5, 6, 7 series, Z Flip 3, 4, 5, 6, 7. SFC 2.0 - fast charging (up to 45W) for Samsung Galaxy S20, S21, S22, S23, S24, S25 Ultra, Tab S7+, Tab S8+, Tab S9+, Tab S10+, Tab S8 Ultra, Tab S9 Ultra, Tab S10 Ultra PD - fast charging for Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max. PD - fast charging (up to 20W) for Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus, 15, 15 Plus, 16 Plus PD - fast charging (up to 24W) for iPhone 16e, iPhone 16, iPhone 16 Pro PD - fast charging (up to 27W) for Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max, iPhone 17 PD - fast charging (up to 30W) for iPhone 16 Pro Max PD - fast charging (up to 40W) for iPhone 17 Pro, 17 Pro Max PD - fast charging (up to 67W) for laptops from Lenovo, HP, Dell, Acer, Asus, Apple MacBook Air, MacBook Pro, iPad mini, iPad Air, iPad Pro, and others.The charger supports WIV, AIC, and CC functions: Wide Input Voltage - supports a broad input voltage range, protecting the adapter from undervoltage and overvoltage and allowing use with different national power standards. Automatic Intelligent Communication - automatically detects the connected device to select optimal charging parameters. Constant Output Current - maintains stable current to prevent output power fluctuations and ensure safe charging.Comprehensive output protection: OCP, OVP, OTP, OSP: Over Current Protection — safeguards against current overload. Over Voltage Protection — protects against output overvoltage. Over Temperature Protection — prevents adapter overheating. Output Short Circuit Protection — protects against short circuit at the output.Other features: Charger adapter dimensions: 90 x 46 x 32 mm including plug, Weight: 105 g, Material: flame-retardant plastic.Package includes: Gray wall charger, Multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, Packed in a cardboard box with a hanging hole.

2.5" SATA drive case, USB 3.0

SuperSpeed USB 3.0 compliant and backwards compatible with USB 2.0, Military-grade shock resistance, Advanced 3-stage shock protection system, Easy Plug and Play operation no drivers required, Connection bandwidth up to 5Gbits per ...

NATEC kettaboks HDD/SSD external enclosure RHINO GO for 2.5" SATA - USB 3.0, Aluminum

The StoreJet 25H3 portable hard drive combines the superior performance of USB 3.1 Gen 1, vast storage space, eye-catching enclosure, and a three-stage shock protection system that meets U.S. military drop-test standards. What else can you ask for?- Military-grade shock resistance*- Fully Compliant with the Hi-Speed USB 2.0 specification- Advanced 3-stage shock protection system- Durable anti-shock rubber outer case- Advanced internal hard drive suspension system- Quick Reconnect Button – after safely removing the hard drive from the system, press to reconnect the drive without having to unplug and replug the USB connector again- One Touch Auto-Backup button**- 256-bit AES file & folder encryption**- Exclusive Transcend Elite data management softwareKõvakettamaht4000 GBKõvaketta suurus2.5"Seadme tüüpHDDKõvaketta liidesJada ATAUSB ühilduvusJahUSB versioon3.0 (3.1 Gen 1)Toetatud Windowsi operatsioonisüsteemidJahToetatud Maci operatsioonisüsteemidJahToetatud Linuxi operatsioonisüsteemidJahToote värvSinine, MeresinineSertifikaatCE, FCC, BSMIKasutamistemperatuur (T-T)5 - 55 °CLaius131,8 mmSügavus80,8 mmKõrgus24,5 mmKaal298 g

USB 3.0 sisemised ühendused: 1 x SATA välised pordid: 1 x USB 3.0,pikkus: 79 mm laius: 37 mm kõrgus: 14 mm Netokaal: 0.54 kg Lisaandmed: SuperSpeed USB 3.0 HDD või SSD access - 10 times faster than USB 2.0, ühildub Seagate GoFlex (long ühenduspesa), toetab 2.5" SATA drives.

External 3x 5.25 ", 1x 3.5", Internal 7x 2.5 "/3.5" (transverse, drive rails), Front I / O 2x USB-A 3.0, 1x headphones, 1x microphone, PCI slots 7, Fan (front) 2x 120mm (optional), Fan (rear) 1x 120mm (optional), Fan (top) 2x 140mm (optional), Fan (other) 1x 140mm (optional) Radiator sizes 240 / 280mm above, Mainboard up to ATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6"), ATX power supply, PSU position below, CPU cooler max. 150mm height, Graphics cards max. 410mm (270mm with HDD cage), Color black, inside black, Lighting without lighting, Dimensions (WxHxD) 210x471x490mm (feet + 21mm), Volume 48.47l, Weight 6.80kg, Enclosure type midi tower, Special features dust filter, CW-01B-OP

SGCC Steel / Mesh / ABS Plastic / Tempered Glass ATX Full Tower; 4 x USB 3.2 gen 1 (3.0) / 1 x USB 3.2 gen 2 Type-C / Audio Front Ports; 12 x 3.5" / 2.5" Combo Internal 3.5" Drive Bays

GEMBIRD USB 3.0 Type-C male to SATA 2.5 drive adapter

New 25.2MP sensor and new engine Phase Hybrid AF and 60 fps AFC burst shooting 8.0-stop B.I.S. and 7.5-stop 5-axis Dual I.S. 2 C4K/4K 60p/50p 4:2:2 10-bit video recording 3" free-angle LCD touchscreen & OLED LVF Dual UHS-II SD slots; Wi-Fi & Bluetooth Dust- & splash-resistant magnesium alloy body New 25.2 MP sensorThe LUMIX G9II's uncompromising image quality captures your decisive moments in ultra-realistic detail that makes you feel you’re there. The new 25.2MP Live MOS sensor with Phase Detection AF delivers richer tonal expression, with a significant improvement in capturing shadows when shooting in RAW. With no low-pass filter, its design allows both for more pixels and higher resolution, and the ISO100 setting is ideal for outdoor shooting. In addition, its higher readout speed delivers C4K/4K 120p video recording and 75 fps burst shooting using the electronic shutter, while also minimizing rolling shutter distortion.A new-generation engineThe latest engine delivers approximately twice the processing power, enabling high-speed processing of higher-resolution, higher bit-rate video. It is endowed with technology developed jointly by LEICA and LUMIX. The combination of the new sensor and engine realizes both Phase Detection AF and high image quality for photos and videos.100MP Handheld High Resolution ModeThe LUMIX G9II's High Resolution Mode supports hand-held shooting, using the Body Image Stabilizer (B.I.S.) mechanism to shift the sensor while capturing consecutive images. Then, it selects multiple steadiest shots and automatically synthesizes them into a 100-megapixel equivalent (11,552 × 8,672-pixel) file. This allows you to capture magnificent natural scenery and detailed works of art in ultra-high resolution without using a tripod. The LUMIX G9II supports RAW file recording, JPEG file recording, and RAW processing during playback, with quick access from the drive mode dial.Live View CompositeThe camera takes multiple images, creating composite images from only those areas that vary in brightness. This feature is convenient for taking images of the night sky that show the light trails of stars or fireworks. Each time the shutter is operated, a composite image is displayed, allowing users to shoot while confirming the results in real time.Time Lapse Video with 4K 60p/50pThe LUMIX G9II supports interval capture to create time lapse video in the camera body itself and is also capable of 4K 60p/50p. Still photos can also be shot with V-Log or Like709 for outstanding handling in post-production. Exposure smoothing takes place during processing, resulting in beautiful time lapse videos with smooth exposure changes.Dependable autofocus systemThe most important thing with autofocus is to be dependable. It’s all about how quickly and faithfully you can capture the subject. In addition to contrast AF, the LUMIX G9II is the first LUMIX G series camera to offer the Phase Detection AF system, which dramatically improves subject tracking and light recognition performance. The camera can capture the subject even in challenging scenes where multiple subjects are involved, delivering accuracy even in backlit or low-light environments.Advanced detection AFThe LUMIX G9II’s advanced detection AF pushes the envelope on of sports, wildlife, and racing photography. More accurate human body recognition enables you to single out a subject from among a field of athletes, for example, and shoot continuously. Other new functions include animal eye recognition and car/motorcycle recognition.AFC 60 fps burst shootingThe new sensor’s higher readout speed and new Venus Engine’s superior processing power enable 60 fps burst shooting with AFC, as well as burst shooting of up to approximately 3 seconds, all with the viewfinder remaining backout-free. The sensor’s higher readout speed also minimizes rolling shutter distortion and captures images that are too fast for the naked eye to process.Pre-burst shootingWhat if you could turn back time to capture a shot? With pre-burst shooting, you can. The LUMIX G9II offers advanced flexibility with a choice of 0.5, 1.0, or 1.5-second pre-burst settings. Now you’ll never miss that decisive moment, even in the most dynamic situations, from the flapping of a bird’s wings to an unexpected play on the field.Hand-held shooting on the moveHandheld shooting can be challenging. The LUMIX G9II makes it a bit easier. B.I.S. with 8.0-stop compensation power corrects camera shake, meaning you can use up to 8.0-stop slower shutter speeds. At telephoto range, where B.I.S. is reduced, 7.5-stop 5-axis Dual I.S. 2 provides powerful compensation, allowing you to express your creativity without limitations in low-light environments and at telephoto range.Intuitive operationThe intuitive, well-calculated layout and the 8-directional joystick, with all shooting buttons concentrated on the right side and the most frequently used buttons, such as the joystick, within reach of the thumb, allow for intuitive operation. The focus area can be intuitively selected with a touch of the thumb. This allows you to take pictures quickly and easily while keeping your focus on the subject.Viewfinder for excellent color reproductionThe 3,680k-dot 0.8× live view finder uses a highly responsive, easy-to-see OLED display to capture even fast-moving subjects in fine detail. In addition, the high contrast display (approx. 10,000:1) presents the subject with fine gradations and high clarity throughout.High outdoor visibility free-angle monitorLUMIX G9II features a 1840k-dot 3.0-inch LCD. With outstanding brightness and a wide color gamut, it offers high visibility for outdoor shoots. Its free-angle touch screen makes it easy to compose high- and low-angle shots, further adding to the convenience and flexibility of the camera.Tough body for a wide range of weather conditionsThe tough body is ready to take on a variety of challenging shooting environments. The magnesium alloy full die-cast frame is highly durable, while sealing helps protect seam, dial, and button. The camera as a whole is dust- and splash-resistant and designed for use at temperatures as low as -10 °C. In combination, these features help make shooting both productive and enjoyable in a wide range of weather conditions.Extended battery life: USB power supplyCompatible with USB 3.2 Gen2 Type-C, allowing you to shoot while charging at high speed, convenient during long shoots in the studio or elsewhere. The battery can be charged while supplying power to the camera when used in combination with USB Power Delivery standard compliant battery charger model DMW-BTC15 (sold separately).Double SD card slot for flexible data managementBoth SD card slots are UHS-II SDXC card compatible. Relay Recording allows relays recording between memory cards when the initial card becomes full during recording. Backup Recording allows the same data to be recorded to both cards at the same time. Allocation Record mode allows you to specify the card slot to be used for recording still photographs and video.Easy firmware updates via smartphoneSmart connectivity via Wi-Fi 5GHz bands (IEEE802.11ac) and Bluetooth 5.0 (Low Energy) for easy remote control. Panasonic's LUMIX Sync app for Android/iOS allows you to customize shooting settings, including remote shutter release. Updating camera firmware and copying settings to multiple cameras is also simple via LUMIX Sync.Incredible slow-motion videoExpress that moment in incredible slow-motion video without the need for special equipment or software. You can record HFR (high frame rate) video with C4K/4K 10-bit 120p/100p audio, and 12.5× super slow-motion video (FHD 10-bit 24p/300fps). Start creating video with greater ease and simplicity with the LUMIX G9II.Great for shooting on the moveThe LUMIX G9II also makes it easy to shoot video on the move. Active I.S. determines the status of camera shake and optimizes correction ratios to compensate even for significant motion, while advanced E.I.S. suppresses peripheral distortion that occurs during video shooting. So now you can capture beautiful images, even if you need to move quickly while the camera is rolling.Versatile recording modesThe LUMIX G9II also offers a full range of high-resolution, recording modes to preserve image quality through post-production: 4:2:2 10-bit C4K/4K 60p/50p 4:2:0 10-bit 5.7K(17:9) 30p/25p 4:2:0 10-bit 5.8K(4:3) 30p/25p Direct recording to USB-SSDWith the LUMIX G9II, recording and playback is supported using an external SSD via USB. In addition, the ability to record ProRes 422 HQ (maximum 1.9Gbps) and 4:2:2 10-bit All-Intra directly to SSDs, which combine portability and high capacity has improved efficiency in data backup and post-processing.All-Intra videoThe ALL-Intra compression method, which allows frame-by-frame decoding/encoding, is ideal for non-linear editing. The LUMIX G9II can record at bit rates of up to C4K/4K 800Mpbs.ProRes codec videoYou can record ProRes 422 HQ and ProRes 422 codec videos, the professional industry standard, which deliver high image quality at low compression. This significantly reduces the load on the computer during post-production and allows non-linear editing without transcoding, streamlining your workflow from start to finish. The LUMIX G9II can record FHD (1920 × 1080) internally, and 5.7K (5728 × 3024, 17:9) and C4K (4096 × 2160, 17:9) to an external SSD via USB.13+ stops of V-Log and V-Gamut "VariCam Look"Offering compatibility with Cinema VariCam Look, 13+ stops of dynamic range, and a very wide color spectrum, V-Log and V-Gamut come preinstalled. Users will enjoy impressively accurate color reproduction, subtle gradations from dark areas to highlights, and precise control of color data in post-production. The end result is more creative and satisfying color expression. Moreover, footage shot with the LUMIX G9II can be seamlessly edited with footage shot with VariCam cameras.Vertical video shootingThe camera detects the vertical orientation of video, so the image will rotate automatically when you play it back on your smartphone or other device. This can be turned ON or OFF.4ch audio recordingThe LUMIX G9II delivers much improved audio recording performance, with 4ch 48kHz or 96kHz 24-bit recording possible when an XLR microphone adaptor DMW-XLR1 (sold separately) is attached. This LUMIX G9II gives you much greater flexibility when shooting outdoors, for example, where multiple audio sources are present, or when recording backup audio. Now also supports 2ch 48kHz 24-bit recording with the built-in mic and 2ch 96kHz 24-bit high-resolution recording with an external mic (sold separately).

4x DDR5, 1x PCIe 5.0 x16, 1x PCIe 4.0 x16, 1x PCIe 3.0 x1, 1x Blazing M.2, 4x Hyper M.2, 8x SATA3, 2x USB-C, 8x USB 3.2, 6x USB 2.0, Killer E3100 2.5GB, 802.11be Wi-Fi 7 + Bluetooth, 1x HDMI, 1x DP 1.4, ATX

Compact USB wall charger AXAGON ACU-PQ30 Sil for fast charging of up to two mobile devices at a time. With 30W of total power, the charger charges phones and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector, but also double-sided USB-C connectors. Compact size and high performance is given by the new Sil technology used. Super silicon uses advanced silicon-based materials. The charger can thus achieve smaller dimensions and at the same time safe, stable and fast charging. The efficiency is thus identical to GaN technology while maintaining a favorable price. Power Delivery 3.0 / Quick Charge 4+ USB type C output and one Quick Charge 3.0 USB type A output allow fast charging of smartphones and tablets but also charging of smaller laptops. The charger is compatible with fast charging standards for Apple iPhones, iPads, Samsung, Huawei, Honor, Xiaomi, Motorola, Sony, Google and other phones and tablets. Supports also 20W PD charging for iPhone 12, 13, 14. 27W PD charging for iPhone 13 Pro, 14 Pro and their Pro Max models. 25W SFC charging for Samsung Galaxy S20 - S23, Note, Z Fold series. The Quick Charge 4+ technology allows up to 4 times faster charging of phones than a standard USB charger. The Power Delivery 3.0 technology provides support for modern phones, but also for charging modern laptops. The AIC function recognizes the connected device and automatically selects the optimal charging speed, while the CC function ensures steady course of charging. WIV function works with wide range of input voltages, it protects the adapter against undervoltage and input overvoltage, and allows the use of multiple "national power supply standards". The advanced protection system at the charging adapter output protects the device being charged from damage. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with same parameters, the size of the charger is a third smaller. The combination of small dimensions, achieved with Sil technology and a wide range of input voltages, makes the charger an ideal travel helper. Input: input voltage AC 100V-240V / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Outputs: two outputs 1x USB type A port QC (phones): Quick Charge 3.0: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A, SCP: 3.3-5.5V/4A 1x USB type C port PD (notebooks, phones): Power Delivery 3.0, QC4+: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A, PPS: 3.3-11V/3A, SCP: 3.3-12V/2,2A By simultaneous charging from both outputs, SMART charging is used (max. 5V/4A) maximum power 30W (using QC port) maximum power 30W (using PD port) total maximum power 20W (QC port and PD port simultaneously) total maximum current 4A (QC port and PD port simultaneously) Supported charging technologies: USB type A port QC (max. 30W): Fast charging QC2.0, QC3.0, AFC, FCP, SCP, PE+, SMART charging max. 5V/4A USB type C ports PD (max. 30W): Fast charging PD 2.0, PD 3.0, PPS, QC2.0, QC3.0, QC4+, AFC, SFC, FCP, SCP, PE+, SMART charging max. 5V/4A The charger charges devices with the following technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. Smart 5V/4A Qualcomm Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) and Apple 2.4A (iPad). QC - quick charging of devices that support Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+. AFC - quick charging of devices that support Samsung Adaptive Fast Charging. SFC - quick charging of devices that support Samsung Superfast Charging. FCP - quick charging of devices that support Huawei Fast Charge Protocol. SCP - quick charging of devices that support Huawei SuperCharge Protocol. PE+ - quick charging of devices that support MediaTek Pump Express+ and Pump Express+ 2.0. PPS - charging using the Programmable Power Supply 3.3 protocol - 11V / 3A. PD - quick charging of devices that support Power Delivery 2.0 and Power Delivery 3.0. PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) of Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus phone. PD - quick charging (up to 27W) of Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max phone. SFC - quick charging (up to 25W) of Samsung Galaxy S20, S21, S22, S23 series, Note 10, 20 series, Z Fold 2, 3, 4 series phone. PD - charging (up to 30W) of Apple MacBook Air, MacBook Pro, iPad mini, iPad Air, iPad Pro. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 84 x 36 x 32 mm including a plug, weight: 60 g, material: non-flammable plastic. Package contains: wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

Thin USB-C 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7C with 30 cm long USB cable fast and easy connects up to seven USB devices to the laptop at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The metal hub body is made of aluminum and provides perfect mechanical protection. The elegant finely structured body surface against fingerprint. Fixed 30 cm long USB-C cable is ideal for mobile devices users. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply, for example, even more external drives can be connected to the computer or the number of mobile phones charged can be increased. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, reader, keyboard and mouse, to the phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type C male connector on a fixed 30 cm long cable. Outputs: 7x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Blue LED indicates the connection to the computer. Dimensions 145 x 42 x 15 mm. Weight 90 g (incl. cable). USB cable length 30 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connecting to a computer (charging hub): After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input). Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter).

GaN Vention USB-C+C+A 70W Charger (Gray)The Vention 70W GaN charger is the perfect combination of power and portability. Using GaN V technology, it offers exceptional performance in a much smaller form factor, making it as much as 31% smaller compared to traditional chargers. It is ideal for both travel and home use, saving space without sacrificing functionality.Universal compatibilityThis charger is designed for universal use. Equipped with two USB-C ports and one USB-A port, it supports a wide range of devices - from laptops to tablets to smartphones from various brands, including iPhone and Samsung Galaxy. And support for the latest charging standards, such as PPS, PD 3.0 and QC 3.0, makes it effortless to match the requirements of different devices.Intelligent power distributionThe Vention 70W GaN intelligently distributes power, adjusting the power according to the connected devices. As a result, charging three devices at the same time does not affect the speed and efficiency. The smart power distribution technology allows up to 70W of power from a single port, ensuring fast charging even when you use more than one port.Advanced safety featuresUser safety is a priority for the Vention charger. It is equipped with an overheat, overvoltage, overload and short circuit protection system, ensuring stable and safe charging around the clock. In addition, its housing is fireproof, which increases safety during daily use.Turbo charging for the demandingIf you need a quick top-up, the Vention charger will support you with 70W of power. Your MacBook Air, Google Pixelbook or Dell XPS 13 will reach a charge level of up to 50% in just minutes, allowing you to get back to work or entertainment in no time without a long wait. ModelFEXH0-EUColorGrayInterfaceUSB-A/USB-C*2HousingPCInput100-240V~50/60Hz 1.5A Max.USB-C1/USB-C2 output5.0V-3.0A 15.0W; 0.0V-3.0A 27.0W; 12.0V-3.0A 36.0W; 15.0V-3.0A 45.0W; 20.0V-3.5A 70.0WUSB-A Output5.0V-3.0A 15.0W; 9.0V-2.0A 18.0W; 12.0V-1.5A 18.0W; 10.0V-2.25A 22.5W 70.0W Max.Supported protocolsQC 3.0/QC 2.0/PD 3.0/PD 2.0/PPS/PE 2.0/SCP/FCP/Apple 2.4A/AFC/BC 1.2/DCP

RACK 19" 2U server cases from LanbergOur 19" RACK server chassis is an excellent choice for both professional data centers and advanced individual users. This 2U enclosure is designed to meet the most demanding needs in server construction and operation, while having a real impact on the performance of the entire system. Thanks to its well-thought-out design, it will excel in business and industrial environments where reliability, flexibility and efficient airflow are important. The new series are advanced server enclosures with a variety of fan configurations and mounting space, allowing you to expand your hardware capabilities even more easily. These enclosures are distinguished by their robust construction, space for numerous storage media, and rich I/O panels for quick connection of devices via USB 3.0 ports. Importantly, our models support a variety of motherboard standards, and practical accessories are included for easy installation. As a result, each server can be configured optimally for server operation and flexibly adapted to changing needs. ATX, E-ATX, ITX, Micro-ATX and SSI CEB motherboards supportedThe SC01-6502-12B server case is compatible with E-ATX, ATX, ITX, Micro-ATX and SSI CEB motherboards. This standard is ideal for high-performance servers and workstations based on Intel Xeon and AMD Epyc processors (X399/C600 chipsets). It provides a wide range of possibilities for component selection and scaling of computing power, allowing the creation of diverse configurations: from basic servers to advanced systems in data centers, large networks and industrial applications. Advanced cooling: 7 PWM 80 mm fansGood cooling and free airflow are key features for the proper operation of components. To ensure optimal operating temperatures for high-performance components, the SC01-6502-12B server chassis is equipped with up to 7 high-performance 80 mm PWM fans with adjustable speed (900-2600 RPM). At maximum speed, they maintain a service life of up to 50,000 hours and generate a noise level of 26.1 dB. Thanks to the perforated front with a replaceable dust filter, air flows freely through the interior, ensuring optimal operating conditions in a server room or RACK cabinet. Easy expansion with space for multiple hard drives and SSDsThe design provides, when properly configured, space for 4 2.5" drives and as many as 6 3.5" drives to create a large storage space. This configuration allows you to easily store and segregate large volumes of data, which will be appreciated especially by companies growing at a rapid pace. Solidly constructed server enclosures: durability and resistance to damageEach Lanberg server case is made of galvanized steel as thick as 1.2 mm, which definitely increases its resistance to mechanical damage. Compared to traditional solutions, such as home tower server enclosures or the less well-made some ATX server enclosures, our RACK enclosure models stand out for their additional structural rigidity. This translates into years of reliability in the operation of any server. As a result, you can rest assured that your investment will bring you long-lasting benefits and remain stable even under heavy loads. Connect multiple components to a rich I/O panelA server and a server case are a duo that requires quick access to the most important ports. That's why you'll find 2 USB 3.0 Type-A ports on the front panel of our RACK models, as well as Power and Reset buttons. This makes server management convenient and intuitive, whether you're working in a professional server room or as part of an extended setup in a small or medium-sized business. Dedicated accessories for suitable power supply and mounting in 19" RACK cabinetsLanberg server cases in this series offer a rich set of accessories: interchangeable adapters for Flex ATX, ATX, SFX power supplies, 2x PWM splitters and a key lock. With these, you can easily mount the server in a 19" RACK rack and customize the power supply. The complete accessory package means that even less experienced users can quickly get their server up and running.

Darkflash DS900WD computer case (black) + 4 fansDarkflash DS900WD is a modern solution for demanding users who value both aesthetics and functionality. The distinctive design with a panoramic design without an A-pillar, equipped with a single transparent glass wall and a wooden front, not only looks impressive, but also provides excellent visibility of components. The case is designed to provide optimal cooling, performance and versatility, while offering ease of modification and expansion of computer systems. The kit includes 4 fans.Durability and aestheticsThe Darkflash DS900WD stands out for more than just its looks. It is an enclosure built with durability in mind. The support mechanism and solid construction ensure stability and security for all computer components, which is especially important when expanding the system.Effective coolingEvery computer needs a good cooling system, and the DS900WD provides it without question. The ability to mount up to 10 120 mm fans and a large 360 mm heatsink makes the case ideal for those who expect high performance and reliability, especially during intensive use. In addition, 4 high-performance fans are included, which blend perfectly with the interior of the case.Protection and ease of useThe case is designed to protect the computer's interior from dust, which is important for maintaining cleanliness and performance. In addition, its clever design makes it easy to upgrade and expand components, which is especially useful for users who want to build exactly the system they want.Compatibility and expansionThe Darkflash DS900WD is compatible with a wide range of motherboards, including ATX, M-ATX and ITX, giving users freedom of choice and flexibility in configuring their systems. Additionally, seven PCI slots allow for further expansion and customization of the chassis. ManufacturerDarkflashModelDS900Enclosure typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x2Expansion card slots7Max PSU length250 mmMax length of graphics card425 mmMax height of CPU cooler170 mmMax number of fans10 (120 mm) or 2 (140 mm)Fan mounting optionsTop: 120 mm fan x3 or 140 mm fan x2; Rear: 120 mm fan x1; Side: 120 mm fan x3; Bottom: 120 mm x3Water cooling mounting optionsTop: 240 / 360 mm; Side: 240 mmNumber of fans installed4Type of installed fansARGBButtons and controlsPower, Reset, LEDConnectorsUSB 3.0 x1, USB2.0 x2, HD AudioMaterialTempered glass, 0.5 mm SPCC, woodColorblackHeight454 mmWidth218 mmDepth434 mmWeight6.53 kg

Power Bank 20000mAh PD 20W PB20F Black Battery capacity: 20000mAh Maximum output power: 22.5W (Power Delivery, Quick Charge 3.0, SCP) Number of ports: 4 (2× USB-A, 1× USB-C, 1× micro-USB) Battery type: Lithium-polymer Display: monitors charge level Safety features: Protection against overheating, short circuit, overvoltage, and overload Support for SUPER FAST charging via QC 3.0 and PD This model supports Quick Charge 3.0, Power Delivery, and Huawei SCP, allowing you to charge a smartphone up to 70% in 30 minutes. An ideal solution for people who value speed and full mobility. Thanks to advanced electronics and a high-quality lithium-polymer battery, the power bank provides not only fast but also stable and safe charging without overheating. Universal use - one solution for many devices You can charge almost anything: smartphones, tablets, smartwatches, sports cameras, e-readers, portable consoles, GPS devices, MP3/MP4 players, and much more. A perfect gadget for modern users who value versatility and convenience. The set also includes a USB cable, which allows fast charging of the power bank itself - just plug it in and its ready! Full control and safety The built-in intelligent LED indicator shows the charge level, giving you full control over the energy. No more surprises with a drained device! Durable construction made of fire-resistant PC+ABS material and a full set of protections (against short circuit, overheating, overcharging, and overvoltage) ensure long life and safety for all connected devices. Compact and travel-ready The power bank is designed with mobility in mind - compact format, minimalist casing, and light weight make it easy to fit into a bag or backpack. It meets airline standards, so you can take it on board without worrying about regulations. Quality confirmed by certifications! CE, FCC, and ROHS certifications confirm high quality and compliance with the latest safety standards.

FEATURES • 30W PD Fast Charging - Charges iPhone 15 Pro up to 50% in just 30 minutes, supports PD3.0, QC3.0 and other fast charging protocols• Smart Protection & Temperature Control - 8-layer safety system with BCT technology for heat dissipation• Compact & Travel-Friendly - Mini-sized, lightweight design for easy portability• Wide Compatibility - Supports iPhone, iPad, AirPods, iWatch, Samsung, Google, Huawei & more SPECIFICATIONS Input: AC 100-240V~, 50/60Hz, 0.8A Max.USB-C Output: 5V/3A (15W), 9V/3A (27W), 12V/2.5A (30W), 15V/2A (30W), 20V/1.5A (30W) Max.Size: 31×31×54.55mm (not include pins)Weight: about 48.2g

The AXAGON ACU-PQ67D GaN travel wall charger enables fast charging of up to two mobile devices at the same time. With a total output power of 67W, this charger can recharge laptops, tablets, phones, and other mobile devices at the highest possible speed. It features both a standard USB-A connector and a reversible USB-C connector. The clear LCD display shows the current charging power.Its compact size and high performance are made possible by new GaN technology. Components made from Gallium Nitride operate with high efficiency, providing high power output in a small form factor. The charger is equipped with a Power Delivery 3.0 / Quick Charge 4+ USB Type-C output and a Quick Charge 3.0 USB Type-A output, supporting fast charging not only for smartphones and tablets, but also for laptops.Quick Charge 4+ technology enables up to 4x faster phone charging compared to a standard USB charger. Power Delivery 3.0 supports fast charging for modern phones and also allows for 67W laptop charging.Apple devices are supported for fast charging, with the maximum power depending on the model: iPhone 12-15 support charging up to 20W, iPhone 16 and 16 Pro up to 24W, iPhone 13 Pro to 15 Pro models and iPhone 17 up to 27W, iPhone 16 Pro Max up to 30W, and iPhone 17 Pro and Pro Max up to 40W. The charger is also compatible with iPads and Apple MacBook Air and Pro laptops.Samsung Galaxy phones support Super Fast Charging up to 25W (SFC) for Galaxy S20-S25 series and foldable Z Fold and Z Flip models. Selected Galaxy Ultra models and Galaxy Tab tablets support even faster charging up to 45W (SFC 2.0).Support also extends to other brands such as Motorola, Google Pixel, Xiaomi, Honor, Oppo, OnePlus, Realme, and other common phones and tablets. The charger is also suitable for charging laptops with PD 3.0 technology up to 67W, including brands like Lenovo, HP, Dell, Acer, Asus, and more.An advanced output protection system keeps connected devices safe from damage. The charger's functions also ensure detection of the connected device and automatic selection of the optimal charging speed and process.The charger's body has an ergonomic shape and compact size. Compared to conventional charging adapters with similar parameters, this charger is up to half the size. The combination of small dimensions from GaN technology and a wide input voltage range makes it an ideal travel companion. The integrated LCD display clearly shows the current charging power in watts in real time, so you can easily confirm that your connected device is drawing fast charging power.Input: Input voltage AC 100V-240V / 1.8A / 50-60Hz (WIV function), supports multiple national power standards Two-pin Euro plug—integrated into the adapter bodyOutputs: USB-A port QC (phones) max. 30W: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A Charging technologies: QC 3.0, QC 2.0, AFC, SCP, FCP, SMART, Apple 2.4A USB-C port PD (laptops, phones) max. 67W: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.35A, PPS: 3.3-11V/5A Charging technologies: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC 2.0, SFC, AFC, SCP, FCP, SMART, Apple PDMaximum charger output when using multiple ports:2 devices connected simultaneously USB-C port PD = 45W MAX USB-A port QC = 12W MAXNote: When charging multiple devices, the devices share the available power. The allocated power may change during charging.Supported charging technologies: Standard charging for all devices supporting 5V and charging for Apple iPhone 5, 6, SE, 7. SMART – charging up to 5V/4.5A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A), and Apple 2.4A (iPad). FCP – fast charging with Huawei Fast Charge Protocol. SCP – fast charging up to 25W with Huawei SuperCharge Protocol. AFC – fast charging with Samsung Adaptive Fast Charging protocol. SFC – fast charging with Samsung Super Fast Charging and Super Fast Charging 2.0. QC – fast charging with Qualcomm Quick Charge 2.0, 3.0, and 4+. PPS – fast charging with the Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD – fast charging with USB Power Delivery 2.0 and 3.0.Examples of supported phones, tablets, and laptops: SFC—fast charging (up to 25W) for Samsung Galaxy S20, S21, S22, S23, S24, S25 series, Note 10, 20 series, Z Fold 2-7 series, Z Flip 3-7 series. SFC 2.0—fast charging (up to 45W) for Samsung Galaxy S20-S25 Ultra, Tab S7+, Tab S8+, Tab S9+, Tab S10+, Tab S8 Ultra, Tab S9 Ultra, Tab S10 Ultra PD—fast charging for Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max. PD—fast charging (up to 20W) for Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus, 15, 15 Plus, 16 Plus PD—fast charging (up to 24W) for iPhone 16e, iPhone 16, iPhone 16 Pro PD—fast charging (up to 27W) for Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max, iPhone 17 PD—fast charging (up to 30W) for iPhone 16 Pro Max PD—fast charging (up to 40W) for iPhone 17 Pro, 17 Pro Max PD—fast charging (up to 67W) for laptops from Lenovo, HP, Dell, Acer, Asus, Apple MacBook Air, MacBook Pro, iPad mini, iPad Air, iPad Pro, and more.The charger supports WIV, AIC, and CC functions: Wide Input Voltage—wide input range function protects the adapter from under- and over-voltage at the input and allows usage with different national standards. Automatic Intelligent Communication—automatic detection of the connected device to select optimal charging parameters. Constant Output Current—constant current function prevents output power fluctuations and ensures stable charging.Comprehensive output protection: OCP, OVP, OTP, OSP: Over Current Protection—output protection against current overload. Over Voltage Protection—output overvoltage protection. Over Temperature Protection—protection against adapter overheating. Output Short Circuit protection—protection against output short circuit.The LCD display shows: Current charging power in watts (W).Other features: Charger adapter dimensions: 90 x 46 x 32 mm including plug Weight: 105 g Material: flame-retardant plasticPackage contains: Gray wall charger Multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA Packed in a cardboard box with a hanging hole.

Float in Form. Flow in Function.The CFV235 is a new kind of PC case featuring the innovative Central Floating Ventilation (CFV) structure. This divides the PSU cabin and main chamber, retooling the open space in between as a cooling advantage by accessing extra ventilation. An optimal combination of a full panoramic view, compact footprint and architecturally-enhanced cooling, the CFV235 empowers airflow beyond ordinary dimensions.Central Floating Ventilation free-floating separation provides a unique visual identity.True floating void adds an extra dimension of airflow across 270° of access.The Aurora RGB lighting strip brings the awe and glory of RGB lighting to the free-floating space.COUGAR Unity 240 single-frame PWM reverse-blade fans are preinstalled on the motherboard side.Accommodates a maximum GPU length of 430mm.Compatible with Reverse Connector / Mini ITX / Micro ATX / ATX / CEB motherboards.USB 3.2 Gen 2×2 Type-C (20 Gbps) x1, USB 3.0 Type-A x 2, 4 pole headset audio jack for versatile device connectivity.Houses 2 x 3.5” HDD drives and 2+2 2.5” SSD drives (converted from 3.5” drive bays)

Elements Portable | 1TB | USB 3.0 | 2,5" | Included Accessories USB 3.0 cable,Trial backup software launcher,Quick install guide | Colour Black