ABS+ material is a widely applicable engineering plastic with moderate shrinkage (0.4-0.7%). Excellent processing properties such as good flow, bright, vivid colors and very good layer adhesion allow a wide range of applications for this filament. ABS+ has high impact strength and is impact resistant. ABS+ from ROSA3D gives an elegant semi-matte finish to the surface of prints. It can be smoothed with acetone. Recommended printing parameters: extruder temperature: 230-270°C bed temperature: 80-110°C Heated bed and chamber recommended. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object. PRODUCT PARAMETERS OF ABS+ Diameter: 1,75 mm Net weight: 1000 g Filament is vacuum packed with desiccant. PHYSICAL PARAMETERS OF ABS+ Density: 1.05 g/cm3 Odor: irritating Tensile elongation: 2,5% Tensile strength (to break): 44 MPa Tensile modulus: 2276 MPa Heat distortion temperature: 99
PC/PBT (HT-UV-IMPACT) is a filament for industrial and automotive applications. The material has been modified for impact strength and heat resistance, and infused with an anti-UV stabiliser. The addition of polybutylene terephthalate (PBT) to Polycarbonate means less deformation on 3D printed parts than with pure PC.[more]The material is easier to print than PC and most common PC/ABS blends, does not emit unpleasant odours during printing has relatively low shrinkage for this group of materials (up to 1%) and very good adhesion to the table. Its excellent mechanical properties, very good impact strength and resilience, combined with the ability to be used outdoors (UV resistant) and the possibility of operating at relatively high temperatures (90-110C), make it an excellent construction material with a wide range of applications. Both in terms of impact strength and temperature resistance, the material performs better than the popular PET-G and ABS, while it is easier to print than PC and PC-ABS. Recommended printing parameters extrusion temperature 240-260°C bed temperature: 90-110°C chamber temperature: 50-80°C air supply: 0-20% (depends on model geometry) compatible worktables: glass, smooth PEI, textured PEI, The filament can be printed on both direct and Bowden feed printers. We recommend closing the chamber. If there are problems with adhesion, we recommend using adhesion formulations. Due to the high printing temperatures, it will be necessary to fit a full-metal heatbreak (without the Teflon tube inside). PRODUCT PARAMETERS Color: black Diameter: 1.75 mm Weight: 1000 g ( vacuum packed) Density: 1.20 g/cm3 Odor: odourless Vicat softening point: 120°C (50N, 50°C/h) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: gray Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
With the Creality filament cutter, you can cut your filament quickly and precisely - for uninterrupted and smooth multi-colour printing. Made from high-strength materials, the cutter impresses with its exceptional wear resistance and stability. This means it remains sharp and reliable even with frequent use. Thanks to the sophisticated design, the cutting module can be replaced in just a few simple steps - quickly, easily and without special tools.
360° Uniform Heating – Integrated ceramic heating element for rapid and even temperature rise. Quick Disassembly – All-metal design with integrated nozzle and heat break for easy replacement. High heat resistance – Withstands up to 300°C, ideal for a wide range of technical filaments. Precision Manufacturing Quality – Smooth internal walls (Ra 0.4), no jamming, no filament leakage. Premium Materials – Titanium alloy heat break, copper alloy nozzle, and SKD11 hardened steel (Mohs hardness 7.8). Dedicated for Creality Hi 3D printer
PCTG is an advanced 3D printing filament, belonging to the same polyester family as the popular PET-G. Compared to PET-G, PCTG has higher impact strength, heat resistance (up to 76°C) and transparency. It offers an interesting alternative to PET-G. Like PET-G, PCTG does not require a heated print chamber, making it an excellent choice if you plan to print on open hobby printers.PCTG is characterized by high flexibility, strong adhesion between layers, high viscosity and minimal shrinkage. Its characteristics enable easy and efficient printing, even for those without much 3D printing experience. 3D printing using PCTG is widely used in various sectors. In industry, it is an ideal choice for creating parts, small batch production and usable models, confirming the versatility of this material. The automotive sector also benefits from the advantages of PCTG, using it to print accessories, components in the engine compartment, vehicle component housings, as well as components such as air intakes and fluid inlets (chemical resistance). In the world of sport, PCTG proves its value in the production of various types of accessories, protectors, etc. The properties of this material guarantee not only the high durability of the finished prints, but also their aesthetics and functionality. APPLICATION- spare parts,- small batch production,- utility models,- engine compartment accessories and components,- vehicle component housings,- air intakes,- service fluid inlets,- sports accessories, protectors, etc. HOW TO PRINTRecommended printing temperature 240-270°C.Recommended table temperature: 60-80°C.Heated table required TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000g Print temperature 240-270 °CBed temperature 60-80 °C PHYSICAL PARAMETERS Density 1,24 g/cm3Odor OdorlessTensile strength (to break) 46 MPaNotched Izod impact strength 92 kJ/m2Vicat softening point 76/64 °C (0,455 MPa/1,82 Mpa) Printable model for refill spool sides you can download here: Recommended printing parameters:
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Mocha Mousse has been chosen as the 2025 Color of the Year by the Pantone Institute, an organization dedicated to analyzing and forecasting global color trends. The versatility of the brown palette allows it to seamlessly complement any style. Depending on how we pair the 2025 Color of the Year, we can achieve a variety of effects—from soft, serene combinations to bold, dynamic contrasts. The gentle Mocha Moose shades harmonize beautifully with earthy tones, muted grays, off-white, and green. Browns also pair exceptionally well with natural materials like wood and wicker. Meanwhile, beige creates an intriguing look alongside glossy gold and copper accents. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: Mocha Mousse Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: light brown Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PCTG is an advanced 3D printing filament, belonging to the same polyester family as the popular PET-G. Compared to PET-G, PCTG has higher impact strength, heat resistance (up to 76°C) and transparency. It offers an interesting alternative to PET-G. Like PET-G, PCTG does not require a heated print chamber, making it an excellent choice if you plan to print on open hobby printers.PCTG is characterized by high flexibility, strong adhesion between layers, high viscosity and minimal shrinkage. Its characteristics enable easy and efficient printing, even for those without much 3D printing experience. 3D printing using PCTG is widely used in various sectors. In industry, it is an ideal choice for creating parts, small batch production and usable models, confirming the versatility of this material. The automotive sector also benefits from the advantages of PCTG, using it to print accessories, components in the engine compartment, vehicle component housings, as well as components such as air intakes and fluid inlets (chemical resistance). In the world of sport, PCTG proves its value in the production of various types of accessories, protectors, etc. The properties of this material guarantee not only the high durability of the finished prints, but also their aesthetics and functionality. APPLICATION- spare parts,- small batch production,- utility models,- engine compartment accessories and components,- vehicle component housings,- air intakes,- service fluid inlets,- sports accessories, protectors, etc. HOW TO PRINTRecommended printing temperature 240-270°C.Recommended table temperature: 60-80°C.Heated table required TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000g Print temperature 240-270 °CBed temperature 60-80 °C PHYSICAL PARAMETERS Density 1,24 g/cm3Odor OdorlessTensile strength (to break) 46 MPaNotched Izod impact strength 92 kJ/m2Vicat softening point 76/64 °C (0,455 MPa/1,82 Mpa) Printable model for refill spool sides you can download here: Recommended printing parameters:
Filament 3D ReFill PET-G Magic Army is a three-color 3D filament inspired by military camouflage colors. Through the coextrusion process, it combines three colors (dark green, sandy beige, and brown) into a single strand, creating unique “magical” visual effects. The best results are achieved with prints featuring complex structures and intricate details. The material features low shrinkage, no odor, excellent layer adhesion, and precise detail reproduction. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 60-80°C fan: 0-60% PRODUCT PARAMETERS Color: brown / green / beige Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Odor: odorless
Oclean Flow S elektriline hambahari – valge Kuni 180-päevane aku tööiga: muretu aku kestvus püsivaks suuhoolduseks. Elektrilise hambaharja aku kasutusiga on pärast täislaadimist kuni 180 päeva ilma tüütu laadimiseta iga nädal või kuu. • Võimas Sonic puhastus: sellel elektrilisel hambaharjal on sonic-tehnoloogia, mis vibreerib kiirusega 76 000 liigutust minutis, mis kaitseb tõhusalt hambaemaili ning tagab võimsa ja põhjaliku suupuhastuskogemuse. • 5 suure jõudlusega harjamisrežiimi: hommikune / öö / standardne / valgendamine / õrn 5 režiimi, et rahuldada kõiki võimalikke vajadusi. Iseloomulik öörežiim sügavpuhastab toidujäägid. Valgendusrežiim eemaldab tõhusalt hammastelt plekid, et taastada nende loomulik valge. Kui te pole kunagi varem elektrilist hambaharja kasutanud, alustage juhtimise hõlbustamiseks õrna režiimiga! Algtasemel, algajasõbralik. • Suure tihedusega DuPont™ harjased: Oclean Flow harjapeal on ergonoomiline 3D-disain, mis sobib hammastele paremini. Kõrge tihedusega DuPont™ harjased, mille filament on ümardatud, pakuvad kõige mugavamat harjamiskogemust. • Nutikas taimer: Algajatele mõeldud lihtsalt juhitava helilise elektrilise hambaharina Oclean Flow elektrilisel hambaharjal pole mitte ainult erinevaid režiime, vaid ka 2-minutiline nutikas taimer, 30-sekundiline tsoonivahetuse meeldetuletus ja nutikad märgutuled. • IPX7 veekindel: Oclean Flow’l on IPX7 veekindel, mida saab pesta voolava vee all, et vältida selle ummistumist ja hambapastaga katmist ning hoida seda kergesti puhtana. Komplektis on: 1 käepide, 3 Standard Clean otsikut, 1 USB laadija, 1 kasutusjuhend https://youtu.be/K8r6LceXJp4 Oclean Flow IPX7- veekindel
ROSA-Flex 96A is a thermoplastic polyurethane (TPU). It is intended for intermediate users of 3D printers who want to start their adventure with printing from flexible materials. The ROSA-Flex 96A filament is hard enough to be printed even on printers with Bowden feeding. In addition, it does not require a closed chamber and will easily stick to many work surfaces (eg. glass, smooth PEI, textured PEI, alluminum). ROSA-Flex 96A has excellent interlayer adhesion. Filament made of TPU will be perfect if you need elements resistant to chemical reagents and mechanical damage. Prints can be squeezed and stretched many times without permanently changing their original shape. You can print use it to print a protective case for your smartphone in one of the many vivid colors. ROSA-Flex 96A is a durable technical material, resistant to oils, greases and many solvents. What's more, ROSA-Flex 96A filament was made of components approved for contact with food, complying with FDA 21CFR177.2600 and the amendment of the Commission (EU) 10/2011. For products that come into contact with food, the certification lies with the manufacturer of the final product. APPLICATIONHobby: smartphone cases, drone elements, elements for RC carsTechnical: gaskets, bumpers, anti-vibration dampers / feet, housings, orthoses HOW TO PRINTRecommended printing temperature 220-250°CRecommended bed temperature: 30-60°CRecommended cooling:50-100% (depends on the geometry of the model)Recommended print speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)Compatible bed materials: glass, smooth PEI, textured PEI, alluminum. TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 500 gPrint temperature 220-250 °CBed temperature 30-60 °C HYSICAL PARAMETERSDensity 1,22 g/cm3Odor OdorlessTensile elongation 350 % (EN 12803)Vicat softening point 126°C (ISO 306)
ROSA-Flex 96A Green / Glow in the Dark Green – Flexible 3D Printer Filament (1.75 mm, 0.5 kg) ROSA-Flex 96A Green / Glow in the Dark Green is a high-quality, flexible TPU 3D printing filament with a hardness of 96A that combines excellent elasticity with strong mechanical resistance. It glows green in the dark after exposure to light – perfect for functional and decorative prints that need visibility in low light. Key Features Flexible and Durable: TPU material with 96A shore hardness provides flexibility and resistance to bending and mechanical stress. Glow in the Dark: Emits a green phosphorescent glow after exposure to natural or artificial light – great for creative, visibility-focused projects. Excellent Layer Adhesion: Reliable bonding between layers for strong, lasting prints. Wide Compatibility: Works with most FDM/FFF 3D printers; does not require a closed chamber. Recommended Hardened Nozzle: Glow-in-the-dark additives can be slightly abrasive, so a hardened nozzle is recommended for extended use. Technical Specifications Material TPU (Thermoplastic Polyurethane) Hardness 96A Color Green / Glow in the Dark Diameter 1.75 mm Net Weight 0.5 kg Print Temperature 220–250 °C Heated Bed 30–60 °C Cooled Fan 30–60 % Chamber Requirement Not required Recommended Nozzle Hardened steel Recommended Printing Parameters Extrusion temperature: 220–250 °C Bed temperature: 30–60 °C Cooling fan: 30–60 % (depending on geometry) Print speed: 15–50 mm/s recommended to start slowly and fine-tune for best results. Applications ROSA-Flex 96A filament is ideal for flexible parts that also need visibility in low light, such as wearable accessories, keychains, cases, grips, signage, toys and functional prototypes with elasticity and glow effects. Package Contents 1 × 0.5 kg spool of ROSA-Flex 96A Green / Glow in the Dark Green filament Vacuum-sealed packaging with desiccant to keep filament dry
ABS RefillFilament refills come in small sizes for space-economy and can be used at any given notice, allowing 3D printer operators and hobbyists to do their part for environmental protection while exercising their creative powers.Printimise materjalABSPrintimisvärvidMustBrändiühilduvusXYZprintingÜhilduvusda VinciKlaasistumistemperatuur (min)70 °CKlaasistumistemperatuur (max)90 °COtsiku temperatuur210 °CKaal600 gLäbimõõt1,75 mmPakendi kaal1 kgPakendi tüüpKarpKogus pakis1 tk
eSun Matte PLA 3D filament 1.75mm 1kg Almond Yellow - Matt mandli kollane 3D materjal eSun on tuntud bränd 3D printerite kasutajate ja tootjate seas. Oma tegevust alustas eSun juba aastal 2007. eSun on ROHS, REACH, FDA, ja EN71-3 sertifitseeritud tootja. Tuntud ka oma hea kvaliteedi ja hinna suhtega materjalide poolest. Tehnilised andmed: Kaal: 1KG/Spool Diameeter: 1.75MM Printimise temperatuur: 190-230℃ Soojendatava aluse temperatuur: Ilma soojenduseta / 45-60℃ Soovitatav printimise kiirus: 40-100mm/s Tõmbetugevus (MPa): 34.56 Pikenemine purunemisel (%): 56.1 Paindetugevus (MPa): 41.21 Paindemoodul (MPa): 1119.41 IZOD (KJ/M2): 33.15
eSun Matte PLA 3D filament 1.75mm 1kg Light Blue - Matt helesinine 3D materjal eSun on tuntud bränd 3D printerite kasutajate ja tootjate seas. Oma tegevust alustas eSun juba aastal 2007. eSun on ROHS, REACH, FDA, ja EN71-3 sertifitseeritud tootja. Tuntud ka oma hea kvaliteedi ja hinna suhtega materjalide poolest. Tehnilised andmed: Kaal: 1KG/Spool Diameeter: 1.75MM Printimise temperatuur: 190-230℃ Soojendatava aluse temperatuur: Ilma soojenduseta / 45-60℃ Soovitatav printimise kiirus: 40-100mm/s Tõmbetugevus (MPa): 34.56 Pikenemine purunemisel (%): 56.1 Paindetugevus (MPa): 41.21 Paindemoodul (MPa): 1119.41 IZOD (KJ/M2): 33.15
