Otsing: 2022年7月11日 · 事故通报：近日，位于韩国庆尚北道庆州市的现代重工海洋管件工厂发生爆炸事故

Compact AXAGON ADSA-FP2A SLIM adapter with USB-A 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-A cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-A 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type A male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 20 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-A - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

AXAGON HMC-KB-US KEYBOARD hub turns your phone, tablet or mini-laptop into a full-fledged computer workplace. You connect your mobile device to the 9in1 docking station via the supplied 60 cm long cable. In no time, you have an integrated keyboard, SD and microSD card reader, and connectors for connecting an external monitor, three USB devices, headphones or headset, and Power Delivery power. However, it is necessary that the USB-C port of your mobile device supports video output (DisplayPort Alternate Mode) and Power Delivery. The keyboard, built into an elegant aluminum hub body, is equipped with chiclet keys with a scissor mechanism and 2 mm stroke for precise and quiet typing. The keyboard offers adjustable backlighting in 5 levels, 12 multimedia keys and the possibility of increasing the inclination for comfortable and ergonomic use. Of course, the keys are printed with English localization. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD or 1080p/200Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Three USB-A 5Gbps outputs allow connection of external drives (up to 2 at the same time), flash drive, mouse, printer and other USB accessories. The USB ports also charge mobile phones and tablets with a power of up to 7.5W. The memory card reader supports reading and writing of all versions of SD and microSD cards with a capacity of up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The 3.5 mm audio output offers the possibility of connecting stereo headphones, a headset or active speakers. The PD USB-C input is designed for a suitable Power Delivery charger. This allows both your mobile device and the hub to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. The Multiport Hub with Keyboard is especially ideal for users of phones and tablets Samsung's DeX-enabled Z-series Fold (from Fold3), Galaxy S (from S9), Note (from Note8) and Galaxy Tab S (from S4 except Lite and FE versions). The Dock also enables desktop mode for the Apple iPad Pro and iPad Air (from 2022) tablets. In addition, it ensures compatibility with iPad mini (from 2021) and with iPhone 15 Pro / Pro Max phones, while the image is transferred via mirroring. Input (connection to mobile device / computer): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W port (only for charging), USB-C female connector. Powering the mobile device from the mains adapter via the USB-C hub. PD power must be supported by both the mobile device and the mains charger. USB outputs: 3x USB 5Gbps port, USB-A female connector. USB-C hub handle the connection of two external drives simultaneously. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video output: 1x HDMI A port, HDMI A female connector. 4K / UHD resolution 4096 x 2160 at up to 60Hz. 2K / QHD / WQHD resolution 2560 x 1440 at up to 120Hz. 1080p / FHD resolution 1920 x 1080 at up to 200Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit/RGB support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. mobile device/computer and TV/monitor/AV receiver. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm 4pin jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Keyboard: Keys with scissor mechanism and 2 mm stroke for precise and silent typing. 12 multimedia keys: home, search, brightness, stop / start play / pause, previous / next track, mute, volume, backlight. White key backlight with four intensity settings and backlight off (f12). Switch between OS: fn+S for Windows / Android, fn+A for macOS / iPadOS / iOS. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 296 x 128 x 11 / 6 mm. Weight 353 g (without cable). USB-C cable 60 cm long with connectors C-M straight / C-M bent 90°. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C Keyboard hub, USB-C cable 60 cm long, Keyboard hub travel bag, self-adhesive rubber pads to increase the inclination of the keyboard, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box. The version of the hub according to the keyboard layout: HMC-KB-US - American / English layout

TX201 PCI-E 1x2.5Gb network card Amazing speed - 2.5 Gigabit Ethernet enables access to your multi-gigabit network. The TX201 is up to any task, whether it's local data transfer or internet access. Compatibility with lower standards - The high speeds and ultra-low latency of the 2.5GBase-T standard do not preclude support for devices that use less advanced technologies such as Fast Ethernet or Gigabit Ethernet. The network card automatically negotiates connection speeds. Low-Profile and Full-Height Herring - In addition to the standard herring, a low-profile herring is included with the product for mini tower PCs. Multi-operating system support - Compatibility with Windows 11/10/8.1/8/7, Windows Server 2022/2019/2016/2012/2008 R2 and Linux means the card can be used on a wide variety of devices. Incredible 2.5G network connectivity 2.5 Gigabit Ethernet achieves an incredible data transfer rate of up to 2.5 billion bits per second 2.5× more than the Gigabit Ethernet standard. The TX201 card is ready for any task, such as bandwidth-hungry local data transfer or Internet access. Home data storage available in seconds For local connections, the PCIe 2.5G network card helps build an instant transport channel between the central server and other equipment on the local network. Performing bandwidth-intensive activities at home or in the office won't be difficult, so the network can easily handle local data transmission as well. Extremely fast response Along with 2.5 Gigabit internet access, your gaming experience will become fully optimised with a huge increase in speed, lower latency and better responsiveness. Downloading games, smooth live streaming, huge backups via the cloud are simple and fast, as is character selection. Performance versatility proven by multi-standard compatibility 2.5GBase-T technology is compatible with standards that provide speeds of both 2.5Gb/s, 1Gb/s, 100Mb/s and 10Mb/s Base-T standards. The 2.5G Ethernet port automatically negotiates connection speeds, so you can easily connect to a 2.5G network when it is available. QoS support Quality of Service technology will make sure your bandwidth is always sufficient and lag-free. Stream content, play online games and enjoy smooth internet browsing.

Magic Keyboard is available with Touch ID, providing fast, easy and secure authentication for logins and to unlock your Mac. Magic Keyboard with Touch ID and Numeric Keypad delivers a remarkably comfortable and precise typing experience. It features an extended layout, with document navigation controls for quick scrolling and full-size arrow keys, which are great for gaming. The numeric keypad is also ideal for spreadsheets and finance applications. It’s wireless and features a rechargeable battery that will power your keyboard for about a month or more between charges.¹ It pairs automatically with your Mac, so you can get to work straightaway. It features a USB-C port and includes a woven USB-C Charge Cable that lets you pair and charge by connecting to a USB-C port on your Mac, so you can charge all of your favourite devices with just a single cable. Compatibility iPad Models iPad Pro 13-inch (M4) iPad Pro 12.9-inch (6th generation) iPad Pro 12.9-inch (5th generation) iPad Pro 12.9-inch (4th generation) iPad Pro 12.9-inch (3rd generation) iPad Pro 12.9-inch (2nd generation) iPad Pro 12.9-inch (1st generation) iPad Pro 11-inch (M4) iPad Pro 11-inch (4th generation) iPad Pro 11-inch (3rd generation) iPad Pro 11-inch (2nd generation) iPad Pro 11-inch (1st generation) iPad Pro 10.5-inch iPad Pro 9.7-inch iPad Air 13-inch (M2) iPad Air 11-inch (M2) iPad Air (5th generation) iPad Air (4th generation) iPad Air (3rd generation) iPad Air 2 iPad (10th generation) iPad (9th generation) iPad (8th generation) iPad (7th generation) iPad (6th generation) iPad (5th generation) iPad mini (A17 Pro) iPad mini (6th generation) iPad mini (5th generation) iPad mini 4 Mac Models MacBook Air (13-inch, M3, 2024) MacBook Air (15-inch, M3, 2024) MacBook Air (15-inch, M2, 2023) MacBook Air (13-inch, M2, 2022) MacBook Air (M1, 2020) MacBook Air (Retina, 13‑inch, 2020) MacBook Air (Retina, 13-inch, 2018–2019) MacBook Pro (14‑inch, 2024) MacBook Pro (16‑inch, 2024) MacBook Pro (14‑inch, 2023) MacBook Pro (16‑inch, 2023) MacBook Pro (13‑inch, M2, 2022) MacBook Pro (14‑inch, 2021) MacBook Pro (16-inch, 2021) MacBook Pro (16-inch, 2019) MacBook Pro (13-inch, M1, 2020) MacBook Pro (13-inch, 2020) iMac (24‑inch, M4, 2024) iMac (24-inch, M3, 2023) iMac (24-inch, M1, 2021) iMac (Retina 4K, 21.5‑inch, 2019) iMac (Retina 5K, 27-inch, 2019–2020) Mac Studio (2023) Mac Studio (2022) Mac mini (2024) Mac mini (2023) Mac mini (M1, 2020) Mac mini (2018) Mac Pro (2023) Mac Pro (2019)

The AXAGON PCES-SA4M2 PCI-Express controller extends your desktop PC with two SATA III ports and two slots for SATA M.2 disks with a transmission rate up to 6Gb/s. The combination of a two-port SATA III controller and two SATA M.2 slots makes the card a very useful device for expanding your computer. You can easily connect up to four disks, such as two 3.5" disks or optical drives and two SATA M.2 disks. The card equipped with ASMedia chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. Easy installation without the need to install drivers on most operating systems. Included low profile bracket allow controller installation into standard and also low profile PC cases. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 /2.1. Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. The bandwidth of 2-Lane PCI-Express 3.0 bus 4 GB/s bidirectional. Outputs: 2x independent Serial ATA port, SATA III 6G standard. 2x internal 7-pin SATA data connector. Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. 2x independent NGFF 75-pin B-key slot for SATA M.2 drives. designed for B+M-key and B-key disks with 2230, 2242, 2260 a 2280 mm dimensions. Support of both one-sided and double-sided SATA M.2 SSD disks of all capacities. Other features: Full Plug and Play support. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with the ATA AHCI (Advanced Host Controller Interface) specification revision 1.4. Fully supports Hot Plug connecting and disconnecting of SATA devices while running. Supports Native Command Queuing (NCQ). TRIM feature support for SSD disks. Port Multiplier Command Based Switching feature support. Boot support from connected disk incl. cooperation with computer motherboard BIOS / UEFI. 4x LED to indicate connected disks activity. Four 2-pin sockets for connecting the HDD LEDs of the computer case. The ASMedia ASM1164 chipset is used. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and above. Package contains: PCI-Express controller with standard bracket, low profile bracket, mounting material, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Karastatud klaas 9H Apple iPad Air 4/5/6/7 2020/2022/2024/2025 10.9/11

General Specifications Machine Type Colour Laser All-In-One Available Functions Print, Copy and Scan Print Specifications Print Speed Single sided: Up to 25 ppm (A4) Up to 45.3 ppm (A5-Landscape) Double sided: Up to 15 ipm (A4) Printing Method Colour laser beam printing Print Resolution Up to 1200 x 1200 dpi Warm-up Time Approx. 13 seconds or less from power on First-Print-Out Time Colour approx.: 10.93 seconds or less Mono approx.: 10.90 seconds or less Printer Languages UFRII, PCL5c, PCL6 Fonts 45 PCL fonts Print Margins 5 mm-top, bottom, left and right 10 mm-top, bottom, left and right (Envelope) Toner Saver Mode Yes Advanced Printing Features Encrypted Secure Print Secure Print Print from USB memory key (JPEG/TIFF/PDF) Print from Cloud (Dropbox, GoogleDrive, OneDrive) (PDF/JPEG) Microsoft Universal Print support iOS: AirPrint, Canon PRINT app Android; Mopria certified, Canon Print Service Plug-in, Canon PRINT app, IPP everywhere Copy Specifications Copy Speed Single sided (A4): Up to 25 ppm Double sided (A4): Up to 15 ipm First-Copy-Out Time ADF (A4): Colour Approx. 10.6 seconds or less Mono Approx. 10.5 seconds or less Platen (A4): Colour Approx. 11.2 seconds or less Mono Approx. 11.0 seconds or less Copy Resolution Up to 600 x 600 dpi Copy Modes Text/Photo/Map (Default),Text/Photo/Map (quality), Printed Image, Text Double Sided Copying 1-sided to 2-sided (Automatic) Multiple Copies Up to 999 copies Reduction / Enlargement 25-400% in 1% increments Other Features Preset R/E Ratios by Area, Two-Sided, Density Adjustment, Original Type Selection, Two-sided Original, Sort, N on 1, Sharpness, Erase Frame, Copy ID Card, Copy Passport, Color Mode, Reserved copy Scan Specifications Standard Type Colour Scan Resolution Optical: Up to 600 x 600 dpi Enhanced: Up to 9600 x 9600 dpi Scan Speed Single sided mono: 50ipm (300x300dpi) Single sided colour: 40ipm (300x300dpi) Single sided mono: 40ipm (300x600dpi) Single sided colour: 20ipm (300x600dpi) Colour Scanning Depth 24 bit/24 bit (input/output) Greyscales 256 levels Compatibility TWAIN , WIA, ICA Maximum Scan Width 216mm Scan to PC Scan to USB Memory Key Scan to FTP TIFF/JPEG/PDF/Compact PDF/Searchable PDF / PDF/A-1b Scan to Cloud TIFF/JPEG/PDF/Compact PDF/Searchable PDF / PDF/A-1b Media Handling Scanner Type Platen, ADF Paper Input (Standard) 250-sheet cassette 1-sheet manual feed slot 50-sheet ADF Maximum Paper Input Capacity 251 sheets Paper Output 100-sheet Media Types Plain paper, Recycled paper, Heavy Paper, Thin paper, Colour paper, Coated paper, Label, Post card, Envelope Media Sizes Cassette: A4, A5, A5 (Landscape), B5, A6, Legal, Letter, Executive, Statement, OFFICIO, B-OFFICIO, M-OFFICIO, GLTR, GLGL, Foolscap, 16K, Post card, Indexcard, Envelop (COM10, DL, C5, Monarch), Custom sizes: Min. 76.2 x 127 mm, Max. 216 x 355.6 mm. Multi-purpose tray: A4, A5, A5 (Landscape), B5, A6, Legal, Letter, Executive, Statement, OFFICIO, B-OFFICIO, M-OFFICIO, GLTR, GLGL, Foolscap, 16K, Post card, Indexcard, Envelope (COM10, DL, C5, Monarch), Custom sizes: Min 76.2 x 127 mm, Max. 216 x 355.6 mm. ADF: A4, A5, A6, B5, Legal, Letter, Statement, Custom sizes: Min. 48 x 85.0 mm, Max. 216.0 x 355.6 mm Media Weights Cassette: 60 to 163 g/m² (Up to 200 g/m² with Coated paper) Multi-purpose tray: 60 to 163 g/m² (Up to 200 g/m² with Coated paper) ADF: 50 to 105 g/m² Double Sided Printing Automatic Cassette: A4, B5, Legal, Letter, Executive, OFFICIO, B-OFFICIO, M-OFFICIO, GLTR, GLGL, Foolscap, 16K Custom size - Min. 182 x 257 mm, Max. 216 x 355.6 mm 60 to 200 g/m² Interface & Software Interface Type USB 2.0 Hi-Speed, 10BASE-T/100BASE-TX/1000Base-T, Wireless 802.11b/g/n, Wireless Direct Connection Operating System Compatibility Windows® 11 / Windows® 10 / Server® 2025 /Server® 2022 / Server® 2019 / Server® 2016 Mac OS X version 10.15 & up Linux Network Protocol Print: TCP/IP (LPD/Port9100/IPP/IPPS/WSD) Scan: Push Scan: File: FTP (TCP/IP), SMB3.1.1 (TCP/IP) E-mail/I-Fax: SMTP (send), POP3 (receive) Pull Scan: TCP/IP Management: SNMPv1, SNMPv3 (IPv4,IPv6) Security: TLS1.3, IPSec, IP address filtering, IEEE802.1X, SNMPv3, SSL (HTTPS, IPPS) Security (wireless): Infrastructure Mode: WPA-PSK(AES), WPA2-PSK(AES), WPA3-SAE (AES), WPA-EAP(AES), WPA2-EAP(AES), WPA3-EAP(AES) Access Point Mode: WPA2-PSK(AES), WPA3-SAE (AES) Software and Printer Management MF Scan Utility, Remote User Interface (RUI), Department ID Management, Toner Status Tool, iW Enterprise Management Console: Server-based software for centralised management of a fleet of devices Cooperating with External Security Audit System (Security Information and Event Management) eMaintenance: embedded RDS allows remote eMaintenance services such as meter capture, automatic consumables management and remote diagnostics. Application Library General Features Recommended Monthly Print Volume 250 - 2,500 pages per month Duty Cycle Max. 30,000 pages per month Processor Speed 1200MHz Memory 1GB Storage 4GB Control Panel 12.7 cm LCD Colour Touch Screen Dimensions with Trays (W x D x H) 425 mm x 461 mm x 397 mm Installation Space (W x D x H) 701 mm x 1,020 mm x 785 mm Weight Approx. 20.8 Kg Power Source 220-240V(±10%) 50/60Hz (±2Hz) Power Consumption Maximum: Approx. 980 W Active printing: Approx. 580 W Standby: Approx. 12.0 W Sleep mode: Approx. 1.0 W Typical Electricity Consumption (TEC): 0.23 kWh/week For detailed information relating to Lot26 regulation, please go to: https://www.canon-europe.com/business/lot26/ Noise Levels Sound Pressure: Active: Simplex 53 dB / Duplex 52 dB Standby: Inaudible Sound Power: Active: Simplex 67 dB or less (BW) / 66 dB or less (CL) Duplex 66 dB or less Standby: Inaudible Consumables Cartridges Cartridge 075 Black (1,400 pages) Cartridge 075H Black (3,500 pages) Cartridge 075 Cyan (1,300 pages) Cartridge 075H Cyan (2,500 pages) Cartridge 075 Magenta (1,300 pages) Cartridge 075H Magenta (2,500 pages) Cartridge 075 Yellow (1,300 pages) Cartridge 075H Yellow (2,500 pages)

The slim USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7A with a 1 m long USB cable easily and quickly connects up to seven USB devices to the computer at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s. The metal hub body is made of aluminum and provides perfect mechanical protection. Elegant finely structured body surface against fingerprint. Permanently fixed 1 m long USB-A cable is suitable for use with a desktop computer. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 1 m long cable. Outputs: 7x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Blue LED indicates the connection to the computer's USB port. Dimensions 145 x 42 x 15 mm. Weight 110 g (incl. cable). USB cable length 1 m. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connecting to a computer (charging hub): After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input). Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 1 m long USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.