Hochwertiges Gaming-Mauspad aus CORDURA, 45 x 40 cm Fläche, schmutz- und wasserabweisend, rutschfeste Unterseite aus Gummi, gesäumte Außenränder, nur 3 mm hoch
Alphacool presents its new graphics card water coolers for the latest Nvidia GeForce RTX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers offer outstanding cooling performance. At the center of the cooler is the one-piece milled copper cooler, complemented by a precision-machined brass terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother, brighter surface than conventional nickel plating. The visual design of the GPU water cooler has been changed only slightly. A special highlight is the newly added Core emblem above the jet plate, which underscores its affiliation with the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially adapted aluminum backplate covers the entire rear of the copper cooler and ensures a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - PNY GeForce RTX™ 5090 ARGB EPIC-X RGB™ Overclocked Triple Fan GPU - PNY GeForce RTX™ 5090 ARGB EPIC-X RGB™ Triple Fan GPU - PNY GeForce RTX™ 5090 Overclocked Triple Fan GPU - PNY GeForce RTX™ 5090 Triple Fan GPU Technical data cooler - Complete dimensions (L x W x H): 218.40 x 148.57 x 34.38mm - Radiator base material: chrome-plated copper - Material radiator top: Acrylic - Material Terminal: Acetal - Material connection thread: Brass - Maximum working temperature: 60°C - Pressure tested: 0.8 bar - Connections: 4 x G1/4" - Thickness of radiator base: 3.25mm - Thick cooling fins: 0.4mm - Distance between cooling fins: 0.4mm - Lighting: digital aRGB LEDs - Power connection digital aRGB LEDs: 3-pin JST - Voltage digital aRGB LEDs: 5V - Number of digital aRGB LEDs: 9 - Color: transparent Technical data backplate - Dimensions (L x W x H): 218.40 x 120.00 x 6.00mm - Thick backplate without spacers: 3mm - Material: aluminum Warranty: 3 years
Especially with compact cases equipped with powerful gaming hardware, the focus should be on optimal cooling. With the Meshlicious, Lian Li's subsidiary Ssupd (Sunny Side Up Design), in collaboration with Ncase, presents an exceptionally small Mini-ITX case whose front, top, and side panels are all made entirely of fine mesh, ensuring virtually unobstructed airflow. The interior is also extremely versatile thanks to its clever design. Graphics cards up to 4 slots high can be installed behind a Mini-ITX motherboard. There is also space for large radiators and numerous data drives, which can be powered by either an SFX or ATX power supply — all in a volume of just 14.67 liters. The features of the Ssupd Meshlicious Full Mesh PCIE 5.0 Edition Mini-ITX Case: Extremely compact Mini-ITX case for high-performance gaming hardware Front, top, and side panels made from fine mesh for optimized airflow Supports GPUs up to 4 slots high and 336 mm long Space for two 140 mm fans or a 280 mm radiator at the front Includes a PCIe 5.0 riser card Compatible with ATX or SFX format power supplies Room for up to two 3.5-inch or seven 2.5-inch drives I/O panel with USB-C 3.1 and USB 3.0 Type-A Ssupd Meshlicious: Simple but functional design Externally, the Ssupd Meshlicious stands out at first glance due to its particularly compact SFF format and its extensive mesh panels. The top, front, and both side panels are made from fine mesh, which provides ample fresh air intake while also being light-permeable. All panels can be easily removed thanks to four pins on each, making the installation of high-end gaming hardware easier. The minimalist I/O panel on the lid features a USB-C 3.1 port, a USB 3.0 Type-A port, and an LED-lit power button. The motherboard connections are accessible as usual from the back of the case. On the inside, the Ssupd Meshlicious proves to be highly adaptable. Those who prefer a powerful gaming setup can install a graphics card up to 4 slots high and 336 mm long vertically behind the motherboard tray. Ssupd provides a PCIe 5.0 riser card for this purpose. The GPU ports then face downward and are accessible via an opening. The cable connections must be angled, and an appropriate HDMI cable is included. Versatile and thoughtfully designed In this configuration, the front can accommodate up to two 140 mm fans or a 280 mm radiator. There is 53 mm of space for CPU coolers, as the motherboard tray can be repositioned. By reducing the GPU height to three or two slots, the motherboard tray can be moved back to make room for CPU coolers up to 73 mm high. Alternatively, a compact 2-slot graphics card of up to 211 mm in length can also be installed horizontally, though this comes at the expense of the front radiator. Below it, a provided bracket can be attached to hold two 3.5-inch or four 2.5-inch drives. When using an optional power supply, you can choose between ATX, SFX, or SFX-L formats. The latter frees up space for another 2.5-inch drive. At the bottom, in both configurations, two 2.5-inch drives can be installed in this versatile and stylish Mini-ITX case.
This Wireless LAN antenna can be connected to a WLAN device with RP-SMA interface, in order to send and receive signals. Specification • Connector: RP-SMA plug • Frequency range: 2.400 - 2.500 GHz 5.150 - 5.875 GHz • Antenna gain: 5 dBi @ 2.400 - 2.500 GHz 7 dBi @ 5.150 - 5.875 GHz • Impedance: 50 Ohm • Polarisation: linear, vertical • VSWR: 2.5 • Operating temperature: -10 °C ~ 55 °C • Housing material: ABS • Colour: black • Length: ca. 231.50 mm (with tilt joint) ca. 199.20 mm (without tilt joint) • Diameter: ca. 19.70 mm (top) ca. 21.50 mm (max.) ca. 13.15 mm (RP-SMA) System requirements • Device with a free RP-SMA jack Package content • WLAN antenna
See Delocki USB-kaabel võimaldab USB Type-C™-ühenduse pikendamist. Spetsifikatsioon - Liitmikud: 1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ isane > 1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ emane - Kaabli gabariit: 32 AWG andmeliini pikkus: 32 AWG 24 AWG toiteliin - Väljundvool: kuni 3 A - Kaabli läbimõõt: ca 4,5 mm - Andmeedastuskiirus kuni SuperSpeed USB 5 Gbps - Värv: must - Pikkus koos pistikutega (L): ca. 2,0 m Süsteeminõuded - Arvuti või sülearvuti, millel on vaba USB Type-C™ port Pakendi sisu - USB-kaabel
8-Pin-PCIe-Kabel aus der PRO-Serie von CableMod, mit Textil-Sleeving aus ModMesh-Material, für ASUS ROG/Seasonic/PHANTEKS, 60 cm Länge in Schwarz/Hellgrün
Der FN121 basiert auf dem hervorragenden Design der Modelle FN121 und FM121, arbeitet jedoch mit 9 optimierten Lüfterschaufeln und verbesserter Rahmengeometrie; dies steigert die Leistung und verringert gleichzeitig das Betriebsgeräusch. - Hohe Leistung bei der Kühlung des Systems - Hoher Luftfluß und geringe Geräuschentwicklung im 9-Blatt Design Technische Daten: Abmessung: 120 x 120 x 25mm Farben: Transparent Rot beleuchtet Gewicht: 122g Nennspannung: 12V Startspannung: 6,5 Volt Leistungsaufnahme: 0,33A Nenndrehzahl: 1200 rpm±200 rpm Luftförderleistung: max. 99,337m³/h / 58,47CFM Lautstärke: 25 dB/A Max. statischer Druck: 1,12mm-H2O
Gigabit-ready rackmount 24-port 1U patch panel Cat6A patch panels deliver a steady connection to copper Gigabit & 10G switches Compatible with Cat5e, Cat6 and Cat6A cabling Color-coded labeling for T568A and T568B wiring schemes 110D IDC type terminal blocks (use 110 or Krone type tool) Use with TRENDnet TC-PDT Punch Down Tool (sold separately) Supports ANSI/EIA/TIA 568-B.2-1 and ISO/IEC 11801 Supports ANSI/EIA/TIA 310-D, EN50173-1, and ULE157358 listed 180° angle type (horizontal) Operating temperature: -40° – 66° C (-40° – 150° F) 2-year warranty TRENDnet’s 24-port Cat6A Shielded 1U Patch Panel, model TC-P24C6AS, is ideal for Gigabit and 10G Copper Ethernet network applications. This patch panel is perfect for use with Cat6A shielded cabling, which is specifically designed to eliminate EMI and crosstalk ensuring peak performance and data integrity. Cat6a Performance Cat6a cabling allows performance of up to 10Gbps speeds over Cat6a Ethernet cables Shielded Housing Design 19"1U sturdy metal rackmount housing design protects against EMI/RFI noise for a more stable connection. Cable Management Integrated cable management cover plate with convenient cable separation for better organization and reduced cable clutter
QuMAX eXtra Range LTE offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUT240/950/955/X09/X11 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. There is also space for mounting internal genuine Teltonika GPS and Wi-Fi antennas inside the antenna enclosure. NOTE: There is also available version with extreme high gain antenna for high bands (2300-2700 MHz) – QuMax XR LTE High Band.
