The RAM-201MU-D, LONG length double socket arm with metal knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 9.125" Socket-To-Socket Length: 8"
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.6" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
OVERVIEWThe RAM-HOL-GA50U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
• The u-bolt base makes attaching to handlebars, tubing, or railing a breeze• Simple to install and easy to use, the possibilities become endless• Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles• High quality materials insure your device is safe, secure, and within easy reach• Ram Mount's patented design also dampens shock and vibration helping to extend the life of your mobile device• Included in this package is hardware that accommodates rails from 1/2" to 1.1/4" in diameter
The RAM single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.
This RAM-103U-B-2461 consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern and SHORT length double socket arm. The rubber ball is positioned 0.88" from the center of one edge. The double socket arm will attach to all RAM 1.5" dia. ball bases.
The RAM-117BU consists of the RAM ROD® 2000 fishing rod holder and patented 1.5" diameter rubber ball. With the combination of the patented RAM rubber ball and socket system you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
RAM® X-Grip® telefonikinnitus koos lenksu U-poldi alusegaRAM-B-149Z-UN7U koosneb tsingitud U-poldi alusest, kahekordsest pistikupesast ja universaalsest X-Grip® hällist. Sellesse paketti kuulub riistvara, mis mahutab rööpaid läbimõõduga 0,50 tolli kuni 1,25 tolli. Alus sisaldab musti kattekorke, mis tuleb asetada U-poldi avatud otste kohale. Kinnitus on konstrueeritud RAM-i 1-tollise läbimõõduga patenteeritud kummist kuuli- ja pesasüsteemiga, millel on reguleerimispunktid kahe pesa õla mõlemas otsas; see võimaldab peaaegu lõpmatut reguleerimist ja ideaalseid vaatenurki. Kaasasolev komposiitsiine adapter võib siini kitsendada kuni minimaalne laius 0,5 tolli Kaasasoleval X-Grip® turvahällil on puhas ja nutikas nelja jalaga disain, millel on suurepärane hoidmisjõud, ilma telefoni vahtpatjade ja plasti taha peitmata. Vedruga X-Grip® turvahäll laieneb ja tõmbub kokku, võimaldades teie mobiiltelefoni täiuslikult kohandada. RAM X-Grip®, mis on täiuslik täiendus tänapäeva sõidukite moodsale elegantsele interjöörile, on mobiiltelefoni alus. X-Grip® sisaldab seadme kinnitust, mida soovitatakse kasutada välistingimustes. Häll ühildub pihuseadmetega, mis sobivad allpool loetletud mõõtmetega. Üldsuuruse määramisel on oluline kontrollida oma pihuseadme mõõtmeid ümbrise/ümbrise/nahaga.
The RAM® Torque™ handlebar mounting base features a 1" B size RAM® rubber ball and is compatible with rails 3/4” to 1” in diameter. Sizing inserts are included to provide a tight fit while also protecting the mounting surface. The RAM® Torque™ mounting base also includes nylon-insert lock nuts to prevent loosening in high vibration environments.
OVERVIEWThe RAM-B-202-G4U consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Included are 3x (#8-32 x 5/8” PH PD Mach Screws) and 3x (#8-32 SS Nylock Nuts) that will connect the RAM-202-G4U to the bottom of the Garmin echo™ and Striker™ 4 Series.
With the RAM magnifier, you won't have to lean closer or squint to see where you're at or where you're going. The magnifier is 2" x 4" with 2x zoom. The RAM magnifier adaptor quickly installs between the RAM diamond mounting base and the device cradle. The magnifying lens can be adjusted to a variety of angles to accommodate a wide variety of GPS units providing a more easily readable screen. The RAM-MAG-1 is compatible with all RAM diamond bases that contain the universal AMPS 2-hole pattern.
The RAP-B-121-238U, universal glare shield/yoke mount, is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and lightweight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device; brilliant. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another "must have" for any pilot. Once you have had a chance to use this great little device, we are confident you'll find uses for it no matter what you fly, drive, or ride. With everything you get in this package, you may even find yourself using your new RAM Mount on a golf cart, work bench, or even exercise equipment. With RAM, there are no limits. The RAP-B-121-238U fits rails or edge lips from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball (RAP-B-121BBU) giving you the ultimate double ball base.
The RAP-B-400-238U consists of the small Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The RAM-B-174U consists of a 1" diameter rubber ball, double socket arm, hardware for mounting to both brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows you to move the mount to your optimum viewing position.
Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up.
The RAM® Torque™ small rail base features a B size 1” rubber ball and accommodates rails from 3/8” to 5/8” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert lock nuts to prevent loosening in high vibration environments. The RAM-B-408-37-62U allows for mounting to scooter mirror rails as well as vehicle headrests and other round rails within the stated dimensions.
OVERVIEWThe RAM-B-166-GA48 consists of a double socket arm, 3.3" twist lock suction cup base, diamond adapter base and custom high strength composite cradle for the Garmin eTrex 10, 20 and 30. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the suction cup eTrex mount to your optimum viewing position.
The RAM-101 consists of a double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
OVERVIEWThe RAM-B-149Z-GA48 consists of a double socket arm, zinc coated u-bolt base, diamond adapter base and custom high strength composite cradle for the Garmin eTrex 10, 20 and 30. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the motorcycle eTrex mount to your optimum viewing position. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. Also included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
OVERVIEWThe RAP-SB-187-GA41 consists of the RAM EZ-Strap™ base, double ball SHORT arm, diamond adapter base and high strength composite cradle. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the mount to your optimum viewing position. This mount rotates 180 degrees.
OVERVIEWThe RAP-SB-187-GA48 consists of the RAM EZ-Strap™ base, double ball SHORT arm, diamond adapter base and high strength composite cradle. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the mount to your optimum viewing position. This mount rotates 180 degrees.
The RAM-VP-SW1-12-2461 consists of a 12" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole pattern. The Tele-Pole™ can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.
RAM-HOL-MA10U Features:Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.Cradle Material: Black high strength composite.Cradle Hole Pattern: The back of the cradle has two pre-drilled holes compatible with the AMPS hole pattern (1.912 inches from center hole to center hole).Cradle Description: Place the top of the electronic device into the cradle, and then push the base into the expandable arms at the bottom of the cradle. The arms will then snap into place when the electronic device is completely secured in the cradle. The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.Cradle Hardware: Includes a set of nuts and bolts to connect to the OPTIONAL RAM-B-238U diamond plate adapter.Optional Cradle Adapter: The optional RAM-B-238U is a diamond plate adapter with two pre-drilled holes (compatible with the AMPS hole pattern) that attaches to the back of the cradle. The RAM-B-238U has a 1 inch rubber ball that will connect to other RAM 1 inch socket accessories (i.e. RAM-B-201 series arm, etc).
The RAP-365-224-1BU consists of a triple 3.3" twist lock suction cup base with plate that contains the universal AMPs hole pattern. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.
The RAM-224-3U consists of a triple suction cup base with 1.5" diameter ball. The RAM-224-3U is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the RAM-224-3U on a glass or non-porous plastic surface.
The RAP-365-224-1U, triple suction cup base, consists of a 1.5" ball base connected to a high strength composite base with three 3.3" diameter suction cup bases at each end. This base has a suction grip, allowing for the connection with 1.5" double socket arms to any non-porous surface, like a windshield, with confidence.
The RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 3/4” to 1” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert lock nuts to prevent loosening in high vibration environments.
The RAM-B-337U consists of a 1/4"-20 female thread hex hole connected to a B size 1" rubber ball, allowing you to take advantage of the RAM® ball and socket system in a variety of applications.
The RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diameter arm socket and connection plates to create the perfect mount for your application.
Blending the best of versatility, strength and installation ease, the RAM® Pod HD™ is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM® Pod HD™ is an ideal solution for mounting tablets, small laptops, and other similar devices. Requiring minimal space in the vehicle cab, it can be removed quickly and without the use of tools. The versatility of the RAM® Pod HD™ makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types, and other applications which require a robust mounting platform for your tablet.
The RAM-B-236U consists of a 1" rubber ball connected to a 3/8"-16 threaded post. Thread length is .5". The RAM-B-236U will attach to all 1" diameter ball compatible arms.
The large version of the RAM® Torque™ handlebar mounting base features a 1" B size RAM® rubber ball and is compatible with rails 1 1/8” to 1 1/2" in diameter. Sizing inserts are included to provide a tight fit while also protecting the mounting surface. The large RAM® Torque™ mounting base also includes nylon-insert lock nuts to prevent loosening in high vibration environments.
The RAM-HOL-UN7-400U consists of the small Tough-Claw™ base and universal X-Grip® cradle. The X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic. The X-Grip® cradle expands and contracts for perfect fit of most smart phones. This mount rotates 360 degrees. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAP-B-200-1-18U consists of an 18" rigid aluminum rod and (2 qty) single socket arms for 1" ball bases/adapters. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The single socket is compatible with all 1" ball bases and adapters.
The RAM-B-217U consists of two 1" diameter rubber balls connected to a post and 2.5" diameter round base. The round base has pre-drilled holes, including the universal AMPs hole pattern and 3-hole 120 degree pattern. The 1" balls measure center to center 2.5" apart.
The RAM-202CNSU consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base with 3/8"-16 female threaded hole. This mount has pre-drilled holes, including the universal AMPS hole pattern.
The RAM-B-189-TAB3U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded Tab-Tite™ cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
