Arvutitark OÜ

The lightweight screwless AXAGON EE25-SLC SLIDE BOX external enclosure with USB 3.2 Gen 1 (USB 3.0) and SATA 6G interface is designed for all 2.5" SATA hard drives or SSDs. The reversible USB-C connector provides a reliable and convenient connection. The SATA 6G interface with UASP support lets you enjoy the speed of modern SSDs. Support for the TRIM feature limits the gradual degradation of SSD performance over time. It can read S.M.A.R.T. information for monitoring the condition of the external drive. Supports hibernation for the connected drive and the enclosure. The plastic enclosure body allows easy drive replacement without the need for screws. The finely textured cover surface is scratch-resistant and prevents unwanted fingerprints. The foam padding inside the enclosure secures and protects the inserted drive. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transfer rates up to 5 Gbit/s. Connection via reversible USB Type-C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, max. disk capacity - unlimited, max. 2.5" disk height 9.5 mm. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transfer rates of 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transfer rates up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transfer rates up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transfer rates up to 1.5 Gb/s (150 MB/s). The total bandwidth / transfer rate of the enclosure is determined by the USB interface used (theoretical 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in an external enclosure. Ability to connect your device while running thanks to Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic disk spin-down after 10 minutes of inactivity. HDD Turn Off - turns off the disk after disconnecting the device or putting the PC to sleep. Connection via USB-C 3.2 Gen 1 female connector. USB-C / USB-A cable, 32 cm long, included. A subtle blue LED indicates connection to the computer's USB port (steady light) and data transfer (blinking). External enclosure dimensions 130 x 82 x 16 mm. Weight 63 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (all 32- and 64-bit Windows OS versions are supported), Mac OS X 10.x and later, Linux with kernel 2.6.x and later.Note: Drivers are included in supported operating systems and are installed fully automatically. No additional drivers need to be installed and none are available. Package contains: USB-C 3.2 Gen 1 external enclosure for 2.5" SATA disk, USB-C - USB-A cable, 32 cm long, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The compact aluminum AXAGON EE35-XA3 ALINE external enclosure with a high-speed USB 3.2 Gen 1 (USB 3.0) interface is designed for 3.5" SATA drives. UASP support enables you to achieve the maximum possible speed with modern hard drives. Allows reading of S.M.A.R.T. information to monitor the external disk's status. Supports spinning down the connected drives as well as the enclosure itself. The durable cast aluminum enclosure offers excellent mechanical protection for the drive and outstanding heat dissipation. The discreetly shaped case with a brushed finish provides an elegant look while preventing unwanted fingerprints. Easy hard disk installation as well as automatic setup can be managed even by beginners, allowing you to easily create an external drive. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transfer rates up to 5 Gbit/s. Connection via micro USB type B female connector. Device support: SATA II - 3 Gb/s (300 MB/s) interface, Supports 3.5" HDD. Features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0. Supports transfer rates of 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Supports 3.5" SATA III / II / I drives of all capacities without limitation. Complies with Serial ATA 2.0 specification (SATA/300), transfer rates up to 3 Gb/s (300 MB/s). Complies with Serial ATA 1.0 specification (SATA/150), transfer rates up to 1.5 Gb/s (150 MB/s). The total bandwidth/transfer rate of the enclosure is determined by the SATA/300 interface used (theoretical 3 Gbit/s). Supports UASP (USB Attached SCSI Protocol). SSD/HDD boot support in external enclosure. Hot Plug support allows connecting your device while running. Full Plug and Play support. HDD Auto Spindown support - automatically spins down the disk after 10 minutes of inactivity. HDD Turn Off - turns off the disk after removing the device or shutting down the PC. Connection via durable large USB 3.2 Gen 1 Type B female connector. An 80 cm USB-B / USB-A cable is included. A discreet blue LED indicates connection to the computer’s USB port (steady light) and data transfer (blinking). The durable enclosure body is cast aluminum alloy; the end panels are plastic. Simple disk installation - the guides are mounted on the disk, the disk plugs directly into the motherboard’s SATA connector, and is inserted into the enclosure; the front panel is fastened with two screws using the included screwdriver. Compact adapter dimensions: 180 x 120 x 32 mm. Enclosure weight: 244 g (without cables and disk). Power supply: Powered by a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm supply cable. Power switch on the rear panel of the enclosure. AC adapter dimensions: 74 x 36 x 91 mm (incl. plug). AC adapter weight: 128 g (incl. supply cable). Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32- and 64-bit Windows OS versions supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and install automatically. No other drivers need to be installed and no additional drivers are available. Package contains: USB 3.2 Gen 1 external enclosure for 3.5" SATA drive, 80 cm USB-B to USB-A cable, 100-240V / 12V-2A power adapter, mounting rails, screws, and screwdriver, stand for vertical operation, printed installation guide in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packaged in a cardboard box.

Fast external AXAGON EEM2-20G ARMORED box with USB 20Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer. Thanks to the USB 20Gbps interface, the transmission rate is up to 20 Gb/s. To take full advantage of the speed of the box, the controller of the connected device must be compatible with USB 3.2 Gen 2x2. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage of the box is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient air circulation. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the silicone sleeve, which provides better protection of the box against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female. Compatible with USB 5Gbps, USB 10Gbps. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 38 cm in the package. Other data: Box dimensions 15 x 112 x 40 mm (H x W x D). Box weight 83 g (without cable, without disk, without sleeve). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 20Gbps external box for M.2 SSD, silicone sleeve, USB-C USB-C cable 38 cm long, 1 thermal conductive pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The external AXAGON EEM2-SD2 DISPLAY box with a USB 10Gbps interface is designed for M.2 NVMe or SATA SSD drives. Reliable connection to a computer is ensured by a reversible USB-C connector on the box. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. This way, you can connect the box to any available USB port on your notebook. The box is equipped with an advanced LED display that provides an instant overview of your drive's status. It offers several display modes, including detection of the connected drive, the file system used, temperature, drive health, data transfer speed, and operating hours. A detailed graph allows real-time monitoring of the drives temperature, while the sleep mode saves power when idle. With this intelligent monitoring, you will always have your drive under control simply, clearly, and efficiently. Thanks to the USB 3.2 Gen 2 interface, the transfer speed is up to 10 Gb/s. The external M.2 box also supports other modern features such as UASP, TRIM, and allows reading of S.M.A.R.T. information monitoring the condition of the drive. A unique feature, thanks to the used chipset, is the possibility to use both M.2 NVMe and SATA drives. You dont have to think about which type of M.2 drive to insert into the box. The box allows mounting of SSD cards in three different lengths 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided, and the box does not limit the capacity of the inserted SSD drive. Screwless box opening makes installation and removal of the M.2 SSD drive easier. Drive replacement is quick and simple, expanding the possible uses of the box, e.g., for data migration, testing, etc. The external metal casing is finished in gray with an elegant surface that prevents unwanted fingerprints. The aluminum body of the box and the thermal pad ensure ideal cooling of the inserted M.2 SSD drive. This extends its lifespan and also prevents speed throttling, known as Thermal Throttling. By inserting an M.2 SSD drive into this box, you can easily create a fast, compact, and universal external drive that can be used not only with computers and notebooks but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), USB-C female connector. Compatible with USB 5Gbps, USB 20Gbps, USB4, and Thunderbolt 3/4/5. Supported Devices: NVMe M.2 SSDs, SATA M.2 SSDs, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. LED display shows: Recognizing - disk recognition (displayed when the box is connected to a device) Partition - displays the file system, size, and system name of the disk Idle - inactivity (information about the disk - used interface and disk size, speed of the connected bus, partitioning standard of the disk) Disk info - displays information about the disk (manufacturer label of the disk, actual disk temperature, health, amount of written / read data, total running time of the disk, number of disk removals without using safe removal) Monitor real-time disk temperature using a graph Rd/Wr - data transfer (during data transfer, it is possible to switch between sections) Sleep - disk sleep mode Other Features: Supports transfer speeds of 10.000 / 5.000 / 480 Mbit/s. Supports M key or B+M key NVMe (PCIe-Express) and SATA (AHCI) M.2 SSDs with no capacity limit. Supports M.2 drives sizes 2242, 2260, 2280 mm. Supports single- and double-sided M.2 SSDs. Complies with PCIe Base Specification Revision 3.1a specification. Complies with NVM Express 1.3 specification. Complies with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Complies with USB Mass Storage Class specification. The total box bandwidth / transmission rate is determined by the USB interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster transfers in Windows 8 and above. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support. Power supply via USB bus up to 900 mA is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB and data transmission (permanent light). Durable aluminum body and thermal pad improve M.2 SSD cooling. Higher surface temperature is not a defect thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 25 cm long and USB type C female / USB type A male adapter are included.

Universal external AXAGON EEM2-SG2 RAW box with USB 3.2 Gen 2 interface is designed for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. The package includes not only a USB-C -> USB-A cable for connecting the box to a computer, but also a USB-A -> USB-C adapter. You can connect the box to any free USB port on the notebook. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern functions, e.g. UASP, TRIM and allows reading S.M.A.R.T. information that monitors the status of the disk. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in titanium silver colour with an elegant brushed finish that prevents unwanted fingerprints. The rounded box design promises pleasant use. The aluminum box body, cooling holes and thermal conductive pad provides very good cooling of the inserted M.2 SSD disk. This extends its service life and also prevents the disk from slowing down, so-called "Thermal Throttling". By inserting the M.2 SSD in the box, you will easily create fast compact external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transmission rates 10 000 / 5 000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - Drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body, cooling holes and thermal conductive pad helps to cool the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB Type C male / USB Type A male cable 20 cm long and USB type A female / USB type C male adapter are included. Other data: External box dimensions 94 x 41 x 10 mm. External box weight 35 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 3.2 Gen 2 combined external box for SATA M.2 SSD, USB type C - type A cable 20 cm long, USB-A - USB-C adapter, 1 thermal conductive pad, mounting material, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Fast external AXAGON EEM2-UB2 ARROW enclosure with a USB 10Gbps interface for M.2 NVMe SSDs. The reversible USB-C connector on the enclosure ensures a reliable connection. The package includes a USB-C to USB-C cable for connecting the enclosure to your computer. The transfer rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 enclosure also supports other modern features, such as UASP, TRIM, and allows reading S.M.A.R.T. disk status monitoring information. Supports standby mode when idle. An advantage is support for three different SSD lengths - 42, 60, and 80 mm. M.2 drives can be single-sided or double-sided. The enclosure does not limit the capacity of the installed SSD. Opening the enclosure with just one screw makes mounting and removing the M.2 SSD easy. Drive replacement is quick and simple, expanding the enclosure's range of uses, e.g. for data migration, testing, etc. The outer metal housing comes in black with an elegant finish that prevents unwanted fingerprints. The aluminum enclosure body and thermal conductive pad provide very good cooling for the M.2 SSD. This extends its service life and also prevents the drive from slowing down, known as Thermal Throttling. By inserting an M.2 SSD into the enclosure, you can easily create a fast, compact and universal external drive. The enclosure can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), USB-C female connector. Compatible with USB 3.2 Gen 1, USB4, and Thunderbolt 3/4. Device support: NVMe M.2 SSD drives, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transfer rates of 10.000 / 5000 / 480 Mbit/s. Supports M key or B+M key NVMe (PCI-Express) M.2 SSD drives with no maximum capacity limit. Supports M.2 drives in sizes 2242, 2260, 2280 mm. Supports both single-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 specification. Compliant with USB Mass Storage Class specification. The total bandwidth / transfer rate of the adapter is determined by the USB interface used (theoretical 10 Gbit/s). The actual adapter bandwidth / transfer rate is about 1.000 MB/s (1 GB/s), limited by the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring of drive condition. Supports booting from an SSD in the external enclosure. Allows device connection while running thanks to Hot Plug support. Full Plug and Play support. Standby support - the drive goes to sleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A subtle blue LED indicates connection to the computer's USB port (steady light) and data transfer (blinking). The robust aluminum body and thermal conductive pad help cool the M.2 SSD more effectively. A higher enclosure surface temperature is not a defect - thanks to the aluminum body, heat generated during drive operation is dissipated better and transferred to the surroundings. Connection via USB 3.2 Gen 2 Type-C female connector. USB Type-C male / USB Type-C male cable, length 20 cm, included in the package. Other data: Enclosure dimensions 115 x 39 x 11 mm. Enclosure weight 43 g (without cable and M.2 SSD drive). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS, and Android. Compatibility depends on operating system support and device manufacturer support. Note: when using Windows 7, it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external enclosure for M.2 SSD, USB-C - USB-C cable, 20 cm long, 3 thermal conductive pads, mounting accessories and a screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The AXAGON HMC-12GM2 GEN2COMBO 12in1 multiport USB-C 10Gbps hub expands your laptop, computer, or phone with eleven ports and an external box for an M.2 drive. You can easily and quickly connect up to two monitors, four USB devices, a Gigabit Ethernet network, headphones, an SD card reader, and an NVMe or SATA M.2 SSD to your computer via the reversible USB-C connector. You also get the option to power a laptop using Power Delivery technology at the same time. The USB-C hub gives you a simple and compact 12in1 docking station for notebooks such as the MacBook Air or Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two provide 5Gbps speeds, and a third provides 10Gbps speeds for more demanding devices. It also offers a USB-C 10Gbps data connector. The hub can also handle the permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. The second USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with power of up to 100W. Connect a suitable USB-C Power Delivery charger to the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI and DisplayPort outputs provide high-quality video. Whether used alone or simultaneously, the ports offer resolutions up to 4K/60Hz Ultra HD and support multi-channel audio transmission. High refresh rates at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrast without restrictions. For the video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect an NVMe or SATA M.2 SSD thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP, and reading S.M.A.R.T. disk status monitoring information. The Gigabit network card extends your computer with a fast and stable network connection, adding a missing RJ-45 network connector or another network card.The card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacities up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical durability, but also passive cooling. Active cooling is provided by a silent integrated fan, which cools both the M.2 drive and the body of the hub itself. You will also appreciate the finely textured surface, which does not retain fingerprints. The port replicator is the ideal accessory for laptops lacking USB connectors, memory card slots, or video outputs. The 50 cm USB-C cable is detachable and can be replaced with a longer cable if needed. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub is also suitable for phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV, or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 1x USB 10Gbps port, USB-A female connector. 2x USB 5Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. The USB-C hub can handle the connection of two external drives simultaneously. Video outputs: 1x HDMI A port, HDMI A female connector. 1x DP port, DisplayPort female connector. Video resolution and properties: The maximum supported resolution when each port is connected individually is 4K / 4096 x 2160 at 60 Hz. 2 simultaneously connected monitors - up to 4K/60Hz on both monitors. For proper video output function, the hub must be plugged into a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) version 1.4 or higher, or a USB-C port with Thunderbolt 3/4 support. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection). Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support for device power supply from the wall charger via the USB-C hub. Maximum power supply via the PD USB-C hub output: 100W - 20V/5A. PD support is required from the device (laptop, phone) and a suitable PD wall charger. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is shown as two disk drives in the file manager. Copying from card to card. M.2 SSD slot: NVMe & SATA M.2 SSD drives. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with sizes of 2242 and 2280 mm. Supports both single-sided and double-sided M.2 SSDs. Compliant with the PCI Express Base Specification Revision 3.1a. Compliant with the NVM Express 1.3 specification. Compliant with the Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with the USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of SSD performance over time. Supports booting from an SSD in the hub's M.2 slot. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface: 10/100/1000 Mb/s. Supported specifications: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduced power consumption at rest. Supports Jumbo frame. Supports full-duplex transmission with IEEE 802.3x flow control and half-duplex transmission with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminate the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN function in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW!, and also Link Change Wake-up. Advanced Power Management features: The adapter supports advanced power management and advanced power saving, e.g. when the Ethernet cable is disconnected. Supported power management technologies include, for example, Advanced Configuration Power management Interface (ACPI), Link Power Management (LPM), or IEEE 802.3az EEE (Energy Efficient Ethernet), and others. Audio output / input: 1x 3.5 mm jack for a headset, headphones, or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates of 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from a PD wall charger. Heavy-duty aluminium body for better hub cooling. A higher hub surface temperature is not a problem - the heat generated by the hub and M.2 drive operation is better dissipated and transferred to the surroundings. The LED indicates data transfer of the M.2 drive. High-quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 50 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS, and Android. Compatibility depends on the OS used and support from the device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated operating systems and also depends on support from the device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of the drivers. Package contains: USB-C hub USB-C cable 50 cm long mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box

USB hub with versatile connectivity options, high speed of up to 5 Gbps, powerful Power Delivery feature, support for 8K/30Hz and 4K/120Hz, compatibility with various operating systems

The multi-port USB-C 10Gbps AXAGON HMC-6G2L hub 6in1 expands your laptop, computer, or phone with six ports. You can easily and quickly connect a monitor, three USB devices, and a Gigabit Ethernet network to your computer at the same time via the reversible USB-C connector. You also have the possibility to power your laptop simultaneously using Power Delivery technology. This port replicator offers a simple and compact 6-in-1 docking station for Windows laptops as well as Apple laptops like the MacBook Air or MacBook Pro. The USB hub features three USB 10Gbps outputs: two with standard USB-A connectors and a third with a USB-C data connector. With the advanced USB 3.2 Gen 2 standard, you can connect high-speed devices, such as NVMe M.2 external drives, to all outputs at up to twice the speed of 10 Gb/s compared to standard Gen 1 hubs (5 Gbps). The hub can simultaneously connect multiple external drives and also allows charging phones and tablets with up to 1.5A/5V current. You can easily charge an Android smartphone, Apple iPhone, Apple iPad, and more from the hub. Another USB-C (PD) connector is reserved exclusively for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger to the hub and connect the hub to a laptop that supports Power Delivery to save one USB-C port. The HDMI output delivers high-quality images up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High refresh rates at popular gaming resolutions such as 2K/120Hz and FullHD/240Hz are also supported. Thanks to HDR (High Dynamic Range) support, you can enjoy significantly enhanced color and contrast ranges. For video outputs to function properly, your laptop must have a USB-C port that supports DisplayPort Alternate Mode (DP Alt Mode) or Thunderbolt 3, 4, or higher. The Gigabit network card provides your computer with a fast, stable network connection, adding a missing RJ-45 port or another network card as needed. The compact and slim aluminum body not only looks great but also ensures mechanical durability and passive cooling. The finely textured surface is fingerprint-resistant for a clean look. You can continue using your current USB peripherals without needing to purchase new ones. Thanks to Plug and Play and Hot Plug functions, connecting the hub is easy and requires no complicated installation, and peripherals can be easily connected or disconnected while your computer is running. The hub also supports connection to phones with a USB-C port—for example, you can connect a flash drive, keyboard, mouse, display, TV, or projector to your phone. Input (connection to laptop): USB 10Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 3.2 Gen 1, USB4, and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W, USB-C female connector. Notebook charging via USB-C hub using a power adapter. PD power must be supported by both the laptop (or phone) and the wall charger. USB outputs: 2x USB 10Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. The USB-C hub can handle multiple external drives connected simultaneously. Mobile devices (including iPad) can be charged with up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz. 2K / WQHD resolution 2560 x 1440 at up to 120Hz. FHD resolution 1920 x 1080 at up to 240Hz. Maximum supported resolutions and refresh rates require connection to a computer with DisplayPort 1.4. To use the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or Thunderbolt 3/4. A compatible OS is also required. The video output function will not be available without these requirements. HDR support (High Dynamic Range, 10-bit support) for realistic reproduction of bright and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection). Supports up to 2-channel LPCM audio. Supports 2-channel audio with a sampling rate up to 192 kHz and up to 24-bit audio—depends on the source and end device, such as laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable. Supported data rates for the Ethernet interface: 10/100/1000 Mb/s. Supports IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Wake-on-LAN support. Other features: Ability to connect devices while running, thanks to Hot Plug support. Full Plug and Play support. Sleep mode support. Power via USB bus—USB bus power or PD wall charger. Heavy-duty aluminum body for improved cooling. High quality shielded cable ensures fast communication and minimizes interference. Dimensions: 120 x 46 x 15 mm. Weight: 79 g (including cable). USB cable length: 15 cm. Supported operating systems: Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS, and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OSes and also depends on support from the device (notebook, phone) manufacturer. Graphics card drivers may also affect correct product operation. We recommend downloading the latest driver versions. Package includes: USB-C hub with built-in 15 cm cable, multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The multi-port USB-C 10Gbps AXAGON HMC-CUB83X2 DUAL 4K DISPLAY 7in1 hub expands your notebook, computer, or phone with two video outputs, a LAN connector, and USB ports. You can connect the notebook to the hub using the 15 cm long USB-C cable. This instantly gives you the option to connect two 4K monitors, three USB devices, and an RJ-45 connector for a Gigabit Ethernet network. At the same time, notebook charging via Power Delivery technology is available. Compatibility with Thunderbolt 3/4/5 provides you with a 7in1 docking station for laptops such as the Apple MacBook Air or Pro. The USB hub offers three USB 10Gbps data outputs, two with standard USB-A and a third with a USB-C connector. Thanks to the USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10 Gb/s. The hub can also handle the permanent connection of several external drives simultaneously. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with a power of up to 100 W. Connect a suitable USB-C Power Delivery charger to the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. The docking station offers two video outputs — HDMI and DisplayPort — and allows you to connect external monitors, TVs, or projectors with a resolution of up to 8K/30Hz Ultra HD. Other resolutions are also supported, such as 4K/144Hz Ultra HD, 2K/240Hz Quad HD, or 1080p/240Hz Full HD, as well as multichannel audio transmission over HDMI. When two monitors are connected simultaneously, it provides a 4K/60Hz resolution on each of them. Thanks to HDR (High Dynamic Range) support, users can enjoy a significantly wider colour range and higher contrast, which is appreciated during both work and entertainment. The Gigabit network card extends your computer with a fast and stable network connection, adding a missing RJ-45 network connector or another network card. The compact aluminium body not only looks great, but also provides mechanical durability and passive cooling. The USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug & Play and Hot Plug functions, connecting the hub is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For proper hub function, the USB-C port of your notebook must support video output (DisplayPort Alternate Mode or Thunderbolt 3 and above) and Power Delivery. The hub can easily handle connection to phones and tablets with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV, or projector to the phone. Input (connection to a computer, tablet or phone): USB 10Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 5Gbps, USB 20Gbps, USB 40Gbps, Thunderbolt 3/4/5. Input (power supply): USB Power Delivery 3.0 100 W, USB-C female connector. Charging of the laptop from the power adapter via USB-C hub. PD power supply must be supported by the laptop (tablet, phone), the cable, and the wall charger. USB outputs: 2× USB 10Gbps port, USB-A female connector. 1× USB 10Gbps port, USB-C female connector. The USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) from the hub's USB-A and USB-C ports. Video output: 1× DP port, DP female connector. 1× HDMI A port, HDMI A female connector. Maximum supported resolution: 1 monitor (DP) up to 8K/30Hz Ultra HD, 4K/144Hz Ultra HD, 2K/240Hz Quad HD, 1080p/240Hz Full HD. 1 monitor (HDMI) up to 8K/30Hz Ultra HD, 4K/144Hz Ultra HD, 2K/240Hz Quad HD, 1080p/240Hz Full HD. 2 monitors up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD. Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60 Hz. To achieve maximum resolution and refresh rate values on the video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10-bit support) — realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio, depending on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface: 10/100/1000 Mb/s. Supports IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus — USB bus power. Power supply via PD charger (not included in package). The LED indicates the connection of the dock to the computer with a steady glow. High-quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions: 15 × 107 × 45 mm (H x W x D). Weight: 66 g (incl. cable). USB-C cable 15 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10/11, macOS, Linux, iPadOS, iOS, Chrome OS and Android. Compatibility depends on the operating system and support from the device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS versions and also depends on support from the device (laptop, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of the drivers. Package contains: USB-C hub with fixed 15 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.

AXAGON HMC-STND HMC-STND USB-C 5Gbps ALUMINUM STAND & HUB 7in1 Multi-port USB-C 5Gbps hub and aluminum stand for laptops. HDMI 4k/60Hz, GLAN, PD, and 3 USB-A ports. USB-C cable 60 cm. The AXAGON HMC-STND 7in1 Hub & Stand is a unique multifunctional hub integrated into a stand for laptops or tablets. This hub expands your laptop or tablet with six additional ports. You connect your laptop to the hub via a 60 cm USB-C <-> USB-C cable. In no time, you get connectivity for a monitor, three USB devices, an RJ-45 connector for a Gigabit Ethernet network, and Power Delivery technology for powering the laptop. The two-joint stand improves ergonomics and comfort while working and is suitable for devices from 10" to 16". It is ideal as a 7in1 docking station for Windows laptops and Apple MacBook Air or MacBook Pro. Three USB-A 5Gbps outputs allow the connection of external drives (up to 2 at the same time), a flash drive, mouse, printer, and other USB accessories. The USB ports also charge mobile phones and tablets with up to 7.5W of power. The Gigabit network card expands the computer with a fast and stable network connection, replaces a missing RJ-45 Ethernet connector, or adds an additional network card. The HDMI output enables connection of an external monitor, TV, or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD, or 1080p/200Hz Full HD, as well as transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colors and contrasts without limitations. The PD USB-C input is designed for a suitable Power Delivery charger. This allows your mobile device and the hub to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. The second USB-C connector is used to connect to the laptop with the included 60 cm long cable with a reversible USB-C connector on both ends. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple, without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. A great advantage of the stand is the clever double-hinge solution that allows adjustment of the tilt angle and height of the laptop screen so that it is flush with the external monitor. This gives you an additional workspace at the correct eye level, which greatly improves ergonomics and comfort at work and boosts your productivity. The elegant design of this stand not only complements your desk in style, but also offers practical functions. The base and hub cover are made of robust aluminum castings that provide passive cooling and guarantee the long life and reliability of the stand and hub. In addition, the cutouts in the base optimize heat dissipation from the notebook, contributing to higher performance and longer life for your device. Thanks to the non-slip finish, your device stays securely in place without the risk of unwanted movement and without any damage to the surface of the laptop or the pad.

The AXAGON HMC-WL9 WIRELESS CHARGING 9in1 multi-port USB-C 10Gbps hub expands your laptop, computer, or phone with two video outputs, a LAN connector, USB ports, and a wireless charger. You connect your laptop to the hub via a 60 cm long USB-C cable. This gives you immediate access to connectivity for two 4K monitors, four USB devices, and an RJ-45 connector for a Gigabit Ethernet network. At the same time, you gain the option of powering your notebook using Power Delivery technology. Thanks to compatibility with Thunderbolt 3/4/5, the 9in1 docking station works with laptops such as the Apple MacBook Air or MacBook Pro. Wireless charging for mobile phones with power up to 15 W is integrated directly into the body of the hub. Thanks to the magnetic mounting system, you only need to place your phone on the surface and it automatically aligns into the optimal position. Charging is therefore maximally efficient, safe, and convenient. Naturally, it is compatible with the Qi1, Qi2, and MagSafe standards. To achieve maximum wireless charging performance, a 100 W PD charging adapter must be used. The wireless charging technology is compatible with a wide range of devices, such as Apple iPhone, Samsung, Google Pixel, Xiaomi, Nothing Phone, as well as models from OnePlus, Huawei, Motorola, and others. Thanks to the universal Qi standard, it is easy to charge older models with lower power output. The USB hub with 4 USB ports offers high-speed connectivity: two USB-A and one USB-C with speeds up to 10 Gbps for fast data transfer, and one USB-A 480 Mbps port ideal for a keyboard or mouse. Thanks to the USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10 Gb/s. The hub can also handle the permanent connection of several external drives simultaneously. The USB-C (PD) input is designed for a Power Delivery charger. This way, both the notebook and the dock are powered directly from a PD charger using Power Delivery 3.0 technology with power up to 100 W. Two video outputs, HDMI and DisplayPort, allow you to connect external monitors, TVs, or projectors with up to 4K/60Hz Ultra HD resolution when two monitors are connected at the same time. Other resolutions are also supported, such as 2K/120Hz Quad HD or 1080p/240Hz Full HD, as well as multichannel audio transmission through HDMI. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts. The Gigabit network card extends your computer with a fast and stable network connection, adds the missing RJ-45 Ethernet connector, or provides another network card. The aluminum body not only looks great, but also provides mechanical durability and passive cooling. Thanks to the rubber pad on the base, the station stays firmly in place. The USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. Thanks to the Plug & Play and Hot Plug functions, connecting the hub is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For the proper function of the hub, the USB-C port of your notebook must support video output (DisplayPort Alternate Mode or Thunderbolt 3 and above) and Power Delivery power. The hub can easily handle connection to phones and tablets with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV, or projector to the phone. Input (connection to a computer, tablet, or phone): USB 10 Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 5Gbps, USB 20Gbps, USB 40Gbps, Thunderbolt 3/4/5. Input (power supply): USB Power Delivery 3.0 100 W, USB-C female connector. Charging of the laptop from the power adapter via USB-C hub. PD power must be supported by the laptop (tablet, phone), the cable, and the wall charger. Wireless charging: Supports 5 W, 7.5 W, 10 W, and 15 W wireless charging. Compatible with Qi1, Qi2, and Apple MagSafe technologies. Supports magnetic alignment for efficient charging. A 100 W PD charging adapter must be used to achieve maximum wireless charging performance. Examples of compatible Qi1 and Qi2 wireless charging phones: Apple iPhone: Compatible with iPhone 8 to 17 models, including the X, 11, 12, 13, 14, 15, 16, and 17 series, and all mini, Plus, Air, Pro, and Pro Max variants. Samsung Galaxy: Compatible with Samsung Galaxy S8 to S25 models, including the S, S+, S Ultra, Z Flip (Flip3Flip6), and Z Fold (Fold3Fold6) series. Google Pixel: Compatible with Google Pixel 4 to 10 models, including the Pixel 4 XL, 6 Pro, 7 Pro, 8 Pro, 9 Pro, 10 Pro, and Pixel Fold. Note: To achieve the highest charging speed, the phone needs to be properly centred. Thanks to the magnetic ring in the device or its case, the smartphone easily aligns itself into the optimal position. USB outputs: 1× USB 480Mbps port, USB-A female connector. 2× USB 10Gbps port, USB-A female connector. 1× USB 10Gbps port, USB-C female connector. The USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) from the hub's USB-A and USB-C ports. Video output: 1× DP port, DP female connector. 1× HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor (DP) up to 8K/30Hz Ultra HD, 4K/60Hz Ultra HD, 2K/120Hz Quad HD, 1080p/240Hz Full HD. 1 monitor (HDMI) up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD, 1080p/240Hz Full HD. 2 monitors (DP + HDMI) up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD, 1080p/240Hz Full HD. Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60 Hz. To achieve maximum resolution and frequency values on video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High Dynamic Range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection). HDMI support for 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. HDMI support for sampling rates up to 192 kHz and up to 24-bit audio depends on the source and destination device, i.e., notebook/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface: 10/100/1000 Mb/s. Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus USB bus power. Power supply via PD charger (not included). The LED indicates the connection of the dock to the computer with a steady glow. High-quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions: 84 × 84 × 140 mm (W × D × H). Weight: 440 g (without cable). USB-C to USB-C cable length 60 cm for connecting the dock to a laptop. Supported operating systems: Windows 10 / 11, macOS, Linux, iPadOS, iOS, Chrome OS, and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from the device (laptop, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of the drivers. Package contains: USB-C docking station, USB-C to USB-C cable, length 60 cm, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.

The four-port AXAGON HUE-S2BL USB 3.0 hub features a 1.2 m long USB cable, optional external power, and fast charging support on all ports. This lightweight, compact hub with an elegant matte plastic body allows you to quickly and easily connect up to four USB devices to your PC at once. The permanently attached 1.2 m long USB cable is ideal for use with desktop computers. A key advantage is the ability to provide external power from any mobile device charger with a micro USB connector. Any unused charger can transform this USB hub into a fast-charging hub at no extra cost. Thanks to USB Battery Charging 1.2 support, mobile phones, tablets, power banks, and other devices can be charged up to 2A (depending on the charger used) in any hub port. iPad tablets can also be charged (at approximately 1A) even without additional power supply, which is useful since iPads typically cannot be charged directly from PC USB 3.0 ports. The hub can even handle a permanent connection of several external drives without external power. When an external power supply is connected, you can work with up to three external drives at once. It can also operate as a standalone charging hub, charging USB devices from the power adapter even when the PC is turned off or disconnected. The USB ports are arranged along the hub body with enough space to allow convenient direct connection of larger USB devices. Features: 4 downstream USB 3.0 ports with ample space around the connectors. 1 upstream USB 3.0 port with a USB 3.0 Type A male connector on a 120 cm permanently attached cable. Compatible with USB 3.0, backward compatible with USB 2.0 and USB 1.1. Supports data transfer rates of 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed). Supports USB Battery Charging v1.2 specification. Each hub port supports charging up to 2A (with external USB charger - not included). Hot Plug support allows you to connect or disconnect devices while running. Full Plug and Play support. LED indicator shows when the hub is powered. Overcurrent detection and protection. Hub dimensions: 96 x 32 x 22 mm. Hub weight: 76 g (including cable). Hub power mode via USB cable (bus power): USB bus power is sufficient for connecting devices with low power consumption (mouse, keyboard, card reader, flash drive, etc.) or self-powered devices (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the hub can also handle up to two magnetic 2.5" external drives simultaneously. Mobile device charging (including iPads) is possible in this mode, but the charging current is limited to 0.9A, or in some cases, 1A (depending on the computer). Hub power mode via USB charger – not included (self power): Any mobile device charger with a micro USB connector (recommended charger output 2A) can be used. In this mode, the hub can manage three magnetic 2.5" external drives, however, for reliable long-term operation, it is recommended to connect a maximum of two 2.5" external drives at the same time. Fast charging of mobile devices (including iPads) up to 2A per hub port. The total current supplied during charging is limited by the external adapter’s output current. Independent charging hub mode without a connected PC (charging hub): After disconnecting the PC or with no PC connected, the hub can operate as a standalone charging USB hub when powered by a USB charger. Fast charging of mobile devices (including iPads) up to 2A per hub port. The total supplied current is limited by the external power adapter’s output. OS support: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 and later (all 32 and 64-bit Windows OS versions supported), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included in supported operating systems and install automatically. No other drivers need to be installed or are available. Package contains: USB 3.0 hub with a permanently attached 120 cm cable, printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

The Axagon CRE-SM4N ID card reader is a secure device, for example, when logging in to the internet bank and digitally signing documents. It supports ATM/CAC/ID/IC/SIS cards. The ID card reader supports Windows, Linux, macOS and Android operating systems.You can communicate with government agencies, banks, and e-service providers at home or at work without leaving your computer. You can also use an ID card to enter almost all major e-service environments in Estonia, which is the safest and most convenient way to log in. It is no longer necessary to remember different passwords and usernames for different services, an ID card, a card reader, and an ID card PIN code are sufficient.

PCIe-3.0-Adapter für zwei M.2-SSDs, 1x M.2-NVMe- und 1x M.2-SATA-SSD, Größen bis 22110, ohne Kapazitätsgrenze, Low-Profile-Bracket inklusive

The AXAGON PCEM2-N internal adapter allows you to connect an M.2 SSD to a desktop computer via the PCI-Express bus. With its high-quality construction, compact size, and well-designed form factor, this adapter is an excellent choice for upgrading desktop computers that lack an M.2 slot. The adapter supports NVMe (PCI-Express) M.2 SSDs, including both single-sided and double-sided drives. There is no limit to the capacity of SSDs, and M.2 cards up to 22x80 mm in size can be used. Thanks to its PCI-Express interface, compatible with x4, x8, and x16 slots, maximum transmission rates can be achieved. The thermally conductive pad and copper-vented design aid in efficiently dissipating heat generated during M.2 SSD operation. LED indicators show the connection or data transfer status in the M.2 slot. The package also includes a low profile bracket for mounting the adapter in low profile cases.Input: • PCI-Express interface, compatible with PCI-Express versions: 4.0 / 3.0 / 2.1 / 2.0 / 1.1 / 1.0a.• Four-lane compatibility, works with x4 / x8 / x16 PCIe slots.Output: • NGFF 75-pin M-key slot for installing an NVMe (PCI-Express) M.2 SSDOther features: • Full Plug and Play support.• Supports M.2 drives in sizes 2230, 2242, 2260, 2280 mm.• Supports M key and B+M key NVMe (PCI-Express) M.2 SSDs without any maximum capacity limit.• Supports both single-sided and double-sided M.2 drives.• Enhanced heat dissipation with copper vents and thermally conductive pad.• Booting from an SSD card supported.• Dimensions: 105 x 49 x 8 mm.• Weight: 32 g.• No driver installation required.Supported operating systems: • MS Windows 7 / 8 / 8.1 / 10 / 11, Windows Server 2008 R2 / 2012 / 2016 (all 32- and 64-bit Windows versions supported), and Linux with kernel 2.6.31 or later.• Note: When using Windows 7, contact your M.2 SSD manufacturer to verify OS compatibility.

AXAGON STND-LQ is a stand with two joints for a laptop or tablet, which provides comfort and improves ergonomics at work. This stand is ideal for devices from 10" to 16". The joint mechanism allows you to adjust both height and angle in any combination. This makes it easy to find the perfect stand inclination for maximum relaxation of your neck and back muscles. Enjoy a comfortable working environment with a compact and portable stand that perfectly adapts to your needs, whether you’re working at home, in the office, or on the go. The base is made of durable aluminum castings that guarantee long life and reliability. Thanks to the non-slip finish, you don’t have to worry about unwanted movement—your device stays firmly in place without damaging the surface of the laptop or the stand. These carefully designed features ensure perfect stability for your laptop, tablet, or even your favorite book, giving you peace of mind and comfort during everyday use. A great benefit is the ingenious double-hinge solution, which lets you smoothly adjust the height of the laptop screen so it’s level with your external monitor. This creates an additional workspace at the correct eye level, greatly improving ergonomics and comfort at work and increasing your productivity. The stand can be easily folded to a compact size, making it convenient to carry wherever you need to go. Its elegant design not only complements your desk in style but also offers practical features you’ll appreciate in everyday use. Cutouts in the base ensure optimal heat dissipation from your laptop, enhancing its performance and durability. Thanks to the sophisticated design, you can easily adjust the tilt angle even while the device is in use, for maximum comfort and productivity during work. Features: Lightweight and strong metal construction. Anti-slip finish that also protects the device from scratches. Suitable for 10" - 16" laptops or other devices. Adjustable height up to 205 mm. Multiple adjustable positions. Adjustable base tilt (180° - 90°). Arm tilt adjustment (180° - 90°). Compact and easy to fold. Improved heat dissipation for notebook. Dimensions: 54 x 280 x 255 mm (W x H x D). Weight: 1065 g. Package contains: Stand for laptop / tablet, packed in a cardboard box.

AXAGON STND-LQB is a stand with two joints for a laptop or tablet, which ensures comfort and improves ergonomics at work. This stand is ideal for devices from 10" to 17.3". The joint mechanism allows you to adjust any combination of height and angle. This makes it easy to find the ideal stand inclination for maximum relaxation of your neck and back muscles. Enjoy a comfortable working environment with a compact and portable stand that adapts perfectly to your needs whether you're working at home, in the office or on the go. The base is made of durable aluminium castings guaranteeing long life and reliability. Thanks to the non-slip finish, you don't have to worry about unwanted movements your device stays firmly in place without damaging the surface of the laptop or the pad. These carefully designed features ensure perfect stability for your laptop, tablet or even your favourite book, giving you peace of mind and comfort during everyday use. A great advantage is the clever double-hinge solution, which allows you to smoothly adjust the height of the laptop screen to be flush with your external monitor. This gives you an additional work place at the correct eye level, which greatly improves ergonomics and comfort at work, while increasing your productivity. The stand can be easily folded into a compact size, making it convenient to carry wherever you need to go. Its elegant black design not only complements your desk in style, but also brings practical features you'll appreciate in everyday use. Cutouts in the base ensure optimal heat dissipation from your laptop, increasing its performance and durability. Thanks to the sophisticated design, you can easily adjust the tilt angle, even with the device currently in use, for maximum comfort and efficiency when working. Features: Lightweight and strong metal construction. Anti-slip finish, which also protects the device from scratches. Suitable for 10" 17.3" laptops or other devices. Adjustable height up to 205 mm. Many adjustable positions. Adjustable tilt of the laptop platform (0180°). Adjustable tilt of the arm (0180°). Load capacity designed for all types of laptops, max. 5 kg. Compact and easy to fold. The laptop holder enables better heat dissipation. Dimensions 280 × 255 × 54 mm (W x D x H). Weight 1065 g. Package contains: Stand for laptop/tablet, black version design, packed in a cardboard box.

Premium USB-C to USB-C data and charging extension cable AXAGON BUCM32-CF15AB SPEED+ EXTENSIONS USB 3.2 Gen 2 with USB-C male and USB-C female connectors. The cable is designed for very fast data transfer and charging of notebooks, phones, tablets, and other mobile devices. It enables high-speed extension for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space or by the location of ports on the laptop. The cable supports data transfer speeds up to 20 Gb/s and also enables video transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies such as Power Delivery up to 240W (depending on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART, and others. Connected devices can be charged with up to 5A current. This durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface, and gold-plated contacts. The cable conductors are made of tin-plated oxygen-free copper. High-quality cable insulation made of flexible TPE guarantees maximum durability while maintaining sufficient flexibility. The nylon braid gives the cable exceptional strength. The 22AWG power wires (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. The 32AWG data wires, together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. The nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable lifespan is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (F) female Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the mobile device battery. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, also compatible with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second-generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Supports video up to 8K@60Hz Full Ultra HD resolution and audio transfer - a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging, and others. Supports fast charging with current up to 5A. The cable includes 22AWG power wires and 32AWG data wires. Tin-plated oxygen-free copper conductors reduce oxidation, increase conductivity, and provide a clear signal without distortion. Double shielding using galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as an extension cable for laptops, tablets, mobile phones, and other devices with a USB-C connector, especially for multiport hubs, port replicators, and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data: cable length 1.5 m, outer cable diameter 5.0 mm. Package contains: USB-C M to USB-C F black cable, packed in a printed and sealed foil package with hanging hole.

The multi-port USB-C 5Gbps AXAGON HMC-7HX2 DUAL 4K DISPLAY 7in1 hub expands your laptop, computer or phone with seven ports. Connect your laptop to the hub via a 15 cm long USB-C cable. You immediately have a connection for a two 4K monitors, three USB devices and an RJ-45 connector for a Gigabit Ethernet network. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will provide you with a simple and compact 7in1 docking station for modern laptops. The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate is up to 5Gb/s thanks to USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. Two HDMI outputs allow you to connect external monitors, TVs or projectors with up to 4K/60Hz Ultra HD resolution, even when two monitors are connected at the same time. Other popular resolutions are also supported, such as 2K/120Hz Quad HD or 1080p/240Hz Full HD and multi-channel audio transmission. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. The compact aluminium body not only looks great, but also provides mechanical durability and passive cooling. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3, 4 and above) and Power Delivery powered. The hub can easily connect to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (computer, tablet or phone connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 10Gbps, USB4, Thunderbolt 3/4/5. Input (power supply): USB Power Delivery 3.0 - 100W port, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (tablet, phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 2x HDMI A port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD. 2 monitors - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD. Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. To achieve maximum resolution and frequency values on video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T. specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Power supply via PD charger (not included). High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 13 x 134 x 34 mm (H x W x D). Weight 59 g (incl. cable). USB-C cable 15 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 15 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.

The universal external AXAGON EEM2-SB2 RAW enclosure with a USB 3.2 Gen2 interface is designed for M.2 NVMe or SATA SSD drives. The double-sided USB-C connector on the enclosure ensures reliable connectivity. The package includes both a USB-C to USB-C cable for connecting the enclosure to a computer and a USB-C to USB-A adapter. You can connect the enclosure to any available USB port on your notebook. The second generation of the fast USB interface lets you take advantage of the speed of modern M.2 SSD drives. The transfer rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. This external M.2 enclosure also supports other modern features such as UASP, TRIM, and allows reading S.M.A.R.T. information to monitor the condition of the disk. Standby is supported when idle. A unique feature, thanks to the new chipset, is the ability to use both M.2 NVMe and SATA drives. You don't have to worry about which type of M.2 drive you install. An advantage is the support for three different SSD card lengths: 42, 60, and 80 mm. M.2 cards can be single-sided or double-sided, and there is no limit on the capacity of the inserted SSD. The tool-free enclosure opening makes installing and removing the M.2 SSD easy. Drive replacement is quick and convenient, expanding the enclosure's use—such as for data migration, testing, and more. The outer metal housing features a black, elegant brushed finish that prevents unwanted fingerprints. The enclosure's rounded design ensures comfortable handling. The aluminum enclosure, cooling holes, and the thermal conductive pad provide excellent cooling for the installed M.2 SSD, extending its lifespan and preventing the disk from slowing down due to "Thermal Throttling". By inserting an M.2 SSD, you'll easily create a fast, compact external disk. The enclosure can be used with computers and notebooks, as well as with smartphones and tablets. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB Type-C female connector. Device support: NVMe M.2 SSD drives, SATA M.2 SSD drives, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transfer rates of 10,000 / 5,000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Supports M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs with no maximum capacity restriction. Supports M.2 drives in sizes 2242, 2260, 2280 mm. Supports both single-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), with bit rates up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total enclosure bandwidth/transfer rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real enclosure bandwidth/transfer rate is about 1000 MB/s (1 GB/s), due to the limitations of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and higher. Supports TRIM functionality to limit gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) for monitoring disk status. SSD boot support in external enclosure. Hot Plug support allows device connection while running. Full Plug and Play support. Standby support - The drive sleeps after 5 minutes of inactivity. Powered via USB 3.0 bus up to 900mA from a single USB port (sufficient in all cases). Blue LED indicator signals connection to the computer's USB port (steady light) and data transmission (blinking). Robust aluminum body, cooling holes, and thermal conductive pad help cool the M.2 SSD. Higher enclosure surface temperature is not a defect—the aluminum body dissipates the disk's operating heat more efficiently into the environment. Connection via USB 3.2 Gen 2 Type-C female connector. Includes a USB Type-C male to USB Type-C male cable (20 cm) and USB Type-C female to USB Type-A male adapter. Other data: External enclosure dimensions: 94 × 41 × 10 mm. Weight: 35 g (without USB cable and M.2 SSD drive). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: For Windows 7, check OS support and driver availability from the M.2 SSD manufacturer. Package contains: USB-C 3.2 Gen 2 combined external enclosure for SATA M.2 SSD, 20 cm USB-C to USB-C cable with USB-C to USB-A adapter, 1 thermal conductive pad, mounting material, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Premium USB-C to USB-C data and charging extension cable AXAGON BUCM32-CF05AB SPEED+ EXTENSIONS USB 3.2 Gen 2 with USB-C male and USB-C female connectors. The cable is designed for ultra-fast data transfers and charging notebooks, phones, tablets, and other mobile devices. It enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators, so you won’t be limited by space or port location on a laptop. This cable supports data transfers up to 20 Gb/s and allows for video transmission up to 8K/60Hz Full Ultra HD resolution along with audio. It is compatible with charging technologies such as Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART, and others. Connected devices can be charged with currents up to 5A. The durable data and power cable features a long service life, equipped with metal terminals, connectors with a nickel-plated surface, and gold-plated contacts. The cable conductors are made of tin-plated oxygen-free copper. High-quality cable insulation made of flexible TPE guarantees maximum durability while maintaining flexibility. The nylon braid provides ultimate strength. Power cables use 22AWG (lower number = larger cross-section and lower resistance) for fast charging of phones and other mobile devices. Data wires are 32AWG and, together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. The nylon braid combined with a cable gland significantly reduces dangerous cable bending. The cable’s lifespan is extended to more than 8,000 standard bends. The mechanical resistance of the cable is further increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (F) female Other features: DATA SYNC & FAST CHARGING – simultaneous data transfer and device charging. SuperSpeed USB 10 Gbps – USB 3.2 Gen 2, also compatible with SuperSpeed USB 20 Gbps – USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0) and USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second-generation transmission rates. Supports 20,000 / 10,000 / 5,000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer supported – USB-C port with DisplayPort Alternate Mode (DP Alt Mode) or Thunderbolt 3/4 required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging, and others. Fast charging with a current of up to 5A supported. Cable includes 22AWG power wires, 32AWG data wires. Tin-plated oxygen-free copper conductors for reduced oxidation, increased conductivity, and clear, distortion-free signal. Double shielding with galvanized foil and tinned copper braid minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones, and other devices with a USB-C connector, especially for multiport hubs, port replicators, and docking stations. Maximum extension length (cable + extension cable) is 2 m. Other data: Cable length: 0.5 m, Outer diameter: 5.0 mm. Package contains: USB-C M to USB-C F black cable, packed in a printed and sealed foil package with hanging hole.

The Telesin GP-JFM-003 backpack mount for sports camerasThe Telesin Action Camera Mount allows you to conveniently and securely mount your device on your backpack, belt or bag, so you can record stunning videos from unparalleled perspectives. The 360° swivel allows you to point the lens in any direction you want, and with the folding arm of the mount you can take a fantastic selfie.Enjoy a new original perspectiveGain a unique perspective and create immersive first-person view footage. Take a stunning selfie against a mountain panorama. Record a one-of-a-kind account of a forest hike. These and many more possibilities await you with the Telesin mount. It's 360° rotatable, easy to assemble and foldable - with its help you will take a lot of surprising shots!Securely mount your cameraThe heavy-duty serrated clip allows for a secure, stable and safe mount. Thanks to it you can be sure that your camera will not move on the backpack strap or fall off it. Compose even the most original shots and do not worry about anything!Compatible with various types of action camerasThe mount is compatible with a whole range of devices. With its help you will attach to the backpack sports cameras such as GoPro Hero 8, 7, 6 or 5, as well as DJI Osmo Action. It also allows you to mount Xiaomi Yi. The accessory is equipped with a standard GoPro interface - use the available for purchase separately waterproof shell or case to safely mount your camera.Packing listbackpack mount GP-JFM-003long screwinstruction manualBrandTelesinModelGP-JFM-003MaterialABS + metalWeight70gDimensions6 x 4 x 5 cmCompatibilityGoPro, Xiaomi, Eken, Sjcam sports cameras

High density single wave copper Barrow radiator Barrow 120mm x 30mm Copper Radiator – Dabel-30A 120

Baseus 0.3mm Tempered Glass for iPhone XR / 11 (2 pcs.)Take care of the safety of your smartphone. Tempered glass by Baseus is distinguished by a thickness of only 0.3mm and is extremely durable. It will perfectly protect your phone screen. It fits perfectly to iPhone XR and 11, does not affect the comfort of use and is very easy to install.Impressive durabilityBaseus tempered glass will reliably protect your iPhone screen. It will provide him with resistance to impacts and scratches. You no longer have to worry if your phone falls down or you accidentally put it in your pocket with your keys! What is important, each product has been rigorously tested to confirm its high quality. Bet on proven solutions and be sure that your smartphone is properly protected!Made for your iPhoneThe accessory is designed specifically for the iPhone XR and 11. The glass fits perfectly on the screen of your smartphone, and its edges are rounded and do not stand out. In addition, the built-in cover protects the microphone and speakers from dust. The accessory also does not affect the quality of the displayed image in any way, and the frameless design provides a wide field of view.Comfort of useIn the kit, you'll find an easy-to-use tool to help you install the accessory. Don't worry about gluing it crookedly or seeing air bubbles under it! The glass also has a special coating that will protect it from fingerprints and make it easy to clean. The accessory also provides eye protection - even during prolonged use. When it's mounted, you can also use the face ID function without any problems.In the boxTempered glass x2Screen cleaning packageInstallation toolBrandBaseusModelSGBL060202ColorBlackThickness0.3mmCompatibilityiPhone XR / 11

Baseus Big Mouth Pro car holder, clip-on, for dashboardMost car accidents are caused by a distraction of the driver and not looking at the roadway. With the Baseus Big Mouth Pro, you don't have to look away from the road anymore to - for example - look at the navigations..Driving safetyWith the dashboard holder, you can watch the road and the phone simultaneously. Keep your phone close at hand, answer calls and use the phone with one hand, constantly watching the road and holding the wheel.Highest qualityThe cradle is made of metal and is provided with rubber protective caps to prevent damage to the phone and cockpit. Big Mouth Pro is compatible with devices with screen diagonals up to 6.5".StableDespite its simple design, the handle is very stable and will hold your device during braking or driving on bumps.SpecificationBaseusNameBig Mouth Pro Car Mount（Applicable to centre console)Product codeSUDZ-A01MaterialMetal + ABSColourBlackCompatibilityFrom 4.7" to 6.5"Size38mm x 122mm x 75mm

Baseus Cafule Cable Baseus cable with a reinforced construction. It supports fast charging and data exchange up to 480mb/sec (e.g. with a computer). With two-sided Micro USB connector we do not have to worry while plugging the cable into the device. ProducentBaseusModelBaseus cafule Cable USB For Micro 2.4A 1M Gray+BlackProduct codeCAMKLF-BG1MaterialTPE, aluminium, nylonLength100 cmOutput current2.4A MAXColorGray + BlackCompatibilityDevices with Micro USB connector

Baseus Cafule CableBaseus cable with a reinforced construction. It supports fast charging and data exchange up to 480mb/sec (e.g. with a computer). With two-sided Micro USB connector we do not have to worry while plugging the cable into the device. ProducentBaseusModelBaseus cafule Cable USB For Micro 1.5A 2M Gray+BlackProduct codeCAMKLF-CG1MaterialTPE, aluminium, nylonLength200 cmOutput current1.5A MaxColorGray+BlackCompatibilityDevices with Micro USB connectors

USB Lightning cableThe length of the Baseus cable is 100 cm and the maximum output current is 2.4 A. The cable provides comfort of use and high functionality. It is made of high quality materials, which ensure long product life. It is made of nylon material, so it does not get tangled up. The cable allows you to charge and transfer files between USB devices and Apple devices equipped with a Lightning input. ProducentBaseusModelCafule Cable USBProduct codeCALKLF-B09MaterialNylone, AluminiumConnectorUSB, LightningMaximum transfer480 MbpsColorBlack + redLength1 mOutput current2.4 A

Baseus Cafule Series Metal Data Cable Type-C to Type-C 100W 1m

Fast charging cable from Baseus The cable is designed to charge laptops, tablets and phones from producers such as Apple, Samsung, Huawei, Honor and Xiaomi. The USB-C to USB-C cable supports fast charging standards: Power Delivery, Huawei Super Charge 5A and Quick Charge 3.0 and 480Mbs data transmission. Cable finish Thanks to its integrated design and zinc alloy material and UV coating, the cable is resistant to oxidation and color loss. The cable's plugs are durable and resistant to abrasion and oxidation so they will plug securely into ports even after prolonged use. The nylon braid provides extra protection, flexibility and durability, and makes it easy to store. In addition, the connection of the cable to the plug has been reinforced with flexible TPE. A Velcro strap prevents the cable from tangling and helps keep it organized. In addition, the cable is available in white, purple, green and black. Safety Using smart charging technology, the cable protects your device from overcharging, over-discharge, overvoltage, overheating, overcurrent, short circuit and electromagnetic field, so both the cable and the device being charged are protected. In addition, while charging, you can use your phone without worrying about the connector overheating, which can damage the battery. In addition, the cable is equipped with Trickle mode, so you can charge your phone at night without worrying, because when the device charges, the backup mode automatically turns on. ATTENTIONCable is not compatible with IPhone 15 series phones ModelCATJK-D01Power100W (5A/20V)Data transmission480 MB/sCable length2mFinishingzinc + nylonCompatibilityDevices with Type-C connectorColorblack

Baseus Cafule CableBaseus Cafule is a high quality USB - USB Type C cable, designed for data transmission and device charging. Due to its reinforced construction, it has increased break resistance (additional protection on the cable at the plug, and a thicker braiding only available in the Cafule version). Additionally, materials reinforcing the structure of the plugs (e.g. aluminum) were used in the construction.ProducentBaseusModelBaseus Cafule Cable USB For Type-C 3A 0.5M Gray+BlackProduct codeCATKLF-AG1MaterialTPE, aluminium, nylonLength50 cmOutput current3A MAXColorGray+BlackCompatibilityDevices with USB-C connectorsFunctionsData transfer, synchronization, charging

Baseus Cafule CableBaseus Cafule is a high quality USB Type C cable, designed for data transmission and device charging. The reinforced construction provides increased resistance to breaking (additional protection on the cable at the plug, and a thicker braided sleeving only available in the Cafule version). Additionally, materials reinforcing the structure of the plugs (e.g. aluminum) were used in the construction.ProducentBaseusModelBaseus Cafule Cable USB For Type-CProduct codeCATKLF-UG1MaterialTPE, aluminium, nylonLength300 cmOutput current2AColorBlack+GrayCompatibilityDevices with USB Type-C portFunctionsData transfer, synchronization, charging

Baseus Cafule Cable The Baseus Cafule is a high-quality USB to USB Type-C cable designed for data transfer and device charging. Its reinforced construction makes it more resistant to breaking (featuring additional protection at the plug and a thicker braided exterior unique to the Cafule version). The construction also uses materials that strengthen the plug structure, such as aluminum. ManufacturerBaseus ModelBaseus Cafule Cable USB For Type-C 2A 2M Gray+Black Product codeCATKLF-CG1 MaterialTPE, aluminum, nylon Length200 cm Output current3A MAX ColorGray + Black CompatibilityDevices with USB-C connectors FunctionsData transfer, synchronization, charging

Baseus USB-C Cable The Cafule cable allows fast charging and data transmission. With Power Delivery 2.0 and Quick Charge 3.0 technology, the cable is able to charge devices equipped with these technologies, e.g. laptops, tablets and smartphones very quickly. The used USB-C plug allows you to connect practically all devices with a USB type C port. The use of aluminium tips and nylon braid ensures long durability of the accessory.

Baseus Cafule Cable Baseus Cafule is a high quality USB - USB Type C cable, designed for data transmission and device charging. Due to its reinforced construction, it has increased break resistance (additional protection on the cable at the plug, and a thicker braiding only available in the Cafule version). Additionally, materials reinforcing the structure of the plugs (e.g. aluminum) were used in the construction. ProducentBaseusModelBaseus Cafule Cable USB For Type-C 3A 1M Red+BlackProduct codeCATKLF-B91MaterialTPE, aluminium, nylonLength100 cmOutput current3A MAXColorRed+BlackCompatibilityDevices with USB-C connectorsFunctionsData transfer, synchronization, charging

Baseus CALYS-A02 USB to lightning fast charging cableBaseus CALYS-A02 USB to lightning cable allows you to quickly charge your phone. It also allows you to transfer files at speeds up to 480MB/s. Durable and resistant to damage - will serve you perfectly for a long time. It also comes with a practical strap, which makes it easy to store the cable and prevent it from tangling.Fast charges your phoneThe product supports 2.4 A fast charging. This means it can instantly charge your iPhone, allowing you to save time! No more waiting forever for your smartphone to be ready to go again - with Baseus, it only takes a few moments.You'll be copying your files in no timeThis practical cable not only allows you to charge quickly - you can also transfer files in no time. The transmission speed of 480MB/s will certainly meet your expectations. A 1GB movie can be copied in just 24 seconds! With the cable you can charge your phone and transfer data at the same time.For the safety of your smartphoneWith Baseus you don't have to worry about the safety of your iPhone either. The built-in smart chip will effectively protect it from damage. Cable provides stable voltage while charging. It also protects your phone against overcharging and overheating among other things.Solid, durable constructionThe cable consists of strands of reinforced, tin-plated copper. It is protected by a sheath made of durable ABS. Thanks to this, the cable is resistant to bending, breaking or tearing. What is more, the place which is extremely susceptible to damage - the connection between the cable and the connector - is additionally protected with a TPE shield. The product will surprise you with its reliable operation.BrandBaseusNameSuperior Series Fast Charging Data CableModelCALYS-A02TypeUSB to lightningMaterialABS + TPEColorWhiteCurrent2.4ATransmission speed480MB/sLength1m

Fast charging, fast data transmissionThe practical and durable Baseus cable for charging Apple products supports the Power Delivery fast charging system of up to 20W and is compatible with PD18W chargers. In addition, it also provides lightning-fast data transfer of up to 480 MB/S.Voltage controlThe cable is equipped with an innovative chip that intelligently detects whether a device has a fast charging system. Thus, it controls the voltage and uses the right one depending on the device it is connected to, thus protecting your device's battery and ensuring the most optimal charging possible.Strong and durableHigh user comfort and functionality have been ensured by using the highest quality materials. The five-band copper core has been protected with fire-resistant and durable polyethylene plastic, and the whole thing has been covered with an extremely damage-resistant ABS-type nylon weave. The zinc alloy used to cover the tip is resistant to discoloration and rust, and the rubber joints have been specially reinforced.ProducerBaseusNameHigh Density Braided Fast Charging Data CableModelCATLGD-02MaterialABS, High density braided wireColorWhiteLength1 mConnectorsUSB-C, LightningTransmission speed480 MB/s

Baseus Crystal Cable USB-C to LightningThe cable of this model is extremely functional and stylish. In addition, using it is very convenient. The product is also very durable and safe. There are several aspects to these things. One of them is fast and safe charging. This was achieved with a new core model, galvanized reinforcements, four wires, and a power of 2.4 A. The cable also has temperature control. It allows simultaneous charging and data transfer. It is durable through its built-in fabric, reinforced joint, and can withstand up to 3,000 and 10,000 times the insertion and withdrawal of plugs. Additionally, the cable is stylish with its material and glossy finish.Fast and secure loadingThe newer core model provides lower electrical resistance and fast charging. To further improve charging, the cable is made of galvanized reinforcement and a copper cable with four conductors. The power with which the cable can charge is 2.4 A. This allows you to shorten the waiting time for charging the phone. The cable prevents overheating. This is due to intelligent temperature control. You can be sure the charging will be safe. Data transfer and loading simultaneouslyThe device allows simultaneous loading and data transfer at a speed of 480 Mbps. To do this, you just need to connect the cable to your laptop or computer. This saves time and makes using the cable even more convenient. StyleThis practical device is not only functional but also stylish. It has a pleasant-to-the-touch aluminum material and a shiny cable finish. It is also available in several color variants. You can choose the one that suits you best and make a stylish gadget. StaminaThe fabric used to make the cable prevents tangling. Additionally, this fabric is resistant to stretching. The cable is sown in a reinforced connector through improved SR protection. It is therefore able to withstand over 10,000 turns. You have probably encountered many times, except that the charging cable breaks after some time when entering the phone. This product minimizes this risk. Inserting and removing the plug also consumes the charging cables. This model addressed this problem. The phone plug can be used for 3000 insertions and extensions. The other part of the cable has a capacity of up to 10,000 switching operations.BrandBaseusModelCAJY000205TypeUSB-C to LightningMaterialAluminium alloy + braided-fabric cablePowerPD 20WTransmission speed480MbpsLength1.2mColorPurple

Baseus Crystal tempered glass with 0.3mm anti-dust coating for iPhone 14 Pro (2pcs).Baseus tempered glass is dedicated to iPhone 14 Pro and fully covers the screen, protecting it from damage. It provides high light transmission and is fingerprint resistant. What's more, it has dust protection. You will find 2 pieces of the product in the set, and its installation will not be a problem. Effective protectionBaseus tempered glass covers the entire screen, does not stand out and does not cause air bubbles. It has passed a number of durability tests, so it effectively protects the display from scratches and cracks. It is also resistant to drops from 1.2 meters, loads up to 20 kg and fingerprints. What's more, it fits any phone case.Convenience of useThe product doesn't affect the image quality and handling of your smartphone, so you can enjoy 8K 120 Hz image resolution and natural colors. What's more, it allows you to use the Face ID function, and the anti-dust coating protects against dirt.Includedtempered glass x2mounting accessoriesManufacturerBaseusModelSGBL110102Thickness0.3 mmFitsiPhone 14 Pro

Baseus Crystal transparent case for AirPods 3Do you want to take care of the safety of your earphones? Do you care about their aesthetic appearance? The Baseus Crystal Transparent Case for AirPods 3 will be a great choice for you! The removable cover of the case increases the comfort of the product, and the high degree of transparency and thin design will make you not feel the presence of the case at all. The product is resistant to contamination and is made of durable TPU material.Taking care of your headphonesThe Baseus Crystal case is compatible with AirPods 3. The product is made of skin-friendly, flexible and durable material, which contains special microbeads - so it effectively cushions drops and protects your headphones from damage. The case is resistant to yellowing, fingerprint marks, sweat stains, and also prevents the entry of dust. As a result, it will always look neat. You can easily clean it as needed. What's more, the product has a port cutout for convenient charging of your headphones. Take care of your equipment with Baseus brand case!ManufacturerBaseusNameCrystal Series Protective Case for AirpodsModelARAP0000CompatibilityAirPods 3MaterialTPUColorTransparent

Baseus Dynamic USB Type-C cable (CALD000002) WHITE COLORThe cable is compatible with Apple brand devices. It quickly charges 20W phones. It is designed for devices with a Lightning connector and supports the Power Delivery protocol. Intelligent matching of the current and voltage to the type of charging ensures safety. Integrated circuit and constant junction temperature makes the device reliable. Fast battery chargingThe cable charges with 20 W and supports the Power Delivery protocol. In just 30 minutes, it is able to charge the iPhone battery up to 50%. This saves time that could be devoted to more enjoyable things.Reliable and fault-tolerantThe cable is made of high quality products such as oxidation and fade resistant ABS elements. The rubber parts protect the ports and metal ends on the phone. A nylon braided housing protects the cable from the outside, preventing deformation and breakage due to bending. The set includes a Velcro, which you can use to close the cable after folding it. Compatible with Apple devices from the 12 to 6S series. The product complies with the 18W and 20W protocol. Loading and uploading data simultaneouslyWith this cable, you can charge and transfer data at the same time. To do this, you just need to connect the cable to the computer. The device allows you to transfer between devices at speeds up to 480 Mbps. It is possible thanks to USB 2.0 standard.BrandBaseusModelCALD000002MaterialABS + nylon braidPowerPD 20 WBaud rate480 MbpsLength1mInput interfaceUSB-CThe exit interfaceLightningColorWhite

Encok HZ19 wired in-ear headphones (white)Baseus Encok HZ19 are wired in-ear headphones with a 13mm dynamic driver that provide clear sound and a stable connection via a 3.5mm jack connector. They will work well for listening to music, watching movies, phone calls, and playing games. Thanks to the lightweight and well-thought-out design, the equipment stably stays in your ears without causing discomfort. The remote control integrated into the cable makes it easy to operate.Crisp soundA 13-millimeter driver with a flexible diaphragm along with a wide frequency response (20 Hz - 20 kHz) means you can hear more detail. The bass holes and rear chamber equalize pressure and guide air so that the sound is better balanced - deep in the lows, clear in the highs and consistent across the bandwidth. This ensures that every song sounds exactly as the artist intended.Distortion-free conversationsThe built-in omnidirectional microphone captures your voice from all sides, ensuring high-quality conversations whether you're chatting on the move or participating in an online meeting.Ergonomic designThe Baseus Encok HZ19 wired in-ear headphones offer a 10% reduced ear cup size compared to the previous generation for a more comfortable fit. The 60-degree slanted housing fits snugly in the ear without pressure, so you can comfortably listen to your favorite sounds for hours, even while lying on your side. The 1.1-meter-long cable is made of flexible TPE plastic that resists tangling and wear, and the integrated remote control features 3 buttons that allow you to quickly switch songs, adjust volume, answer calls and launch the voice assistant.Wide compatibilityThe headphones connect via a 3.5mm connector, ensuring stable sound transmission and wide compatibility with phones, tablets, laptops and computers. ManufacturerBaseusModelEncok HZ19Manufacturer codeA00182301213-00ColorWhiteMaterialABS + TPEWeightApproximately 10.7 gDimensions28.3 x 17.5 x 17.8 mmTransducerDynamic with a diameter of 13 mmCable length1.1 mFrequency range20 Hz - 20 kHzConnector3.5 mmCompatibilityDevices with 3.5 mm jack port

Baseus energy-saving power pump A modern and intuitive gadget, the pump is about the size of a power bank and is a great aid when inflating tires. While in use, it allows you to monitor tire pressure so you don't over-inflate. The device supports wireless charging, and thanks to its high-capacity battery, you don’t have to worry about running out of power. The pump is easy to use and safer than a traditional compressor. Model: Energy Source Inflator Pump Weight: 610 g Input voltage: 5V/2.4A Battery capacity: 27.75 WH Power: 54W Charging time: 4 to 5 hours Dimensions: 78.2 x 140.2 x 42.6 mm Pressure gauge range: 5~150PSI (display flashes when 150PSI is exceeded; exceeding 150PSI may damage the sensor) Supported pressure: Up to 120PSI.

Baseus Flash 2 240W 1m USB-C to USB-C Fast Charging Cable (Black)The Baseus Flash 2 240W 1m USB-C to USB-C Fast Charging Cable in black is designed to meet the demands of even the most demanding users. This product is synonymous with versatility and performance, offering not only great compatibility but also many other advantages.Fast ChargingThe Baseus Flash 2 USB-C to USB-C cable enables rapid charging of devices with a power output of 240W. Long waiting times are a thing of the past - users can enjoy a fully charged battery in the blink of an eye. This solution is ideal for those who value efficiency and readiness to act at any moment.Top-Level CompatibilityThe Baseus Flash 2 cable offers broad compatibility, fitting a wide range of devices. Whether you're using a smartphone, tablet, laptop, or other devices, this cable will meet your needs.Intelligent E-Marker Chip for Maximum PerformanceThanks to the intelligent E-marker chip, this cable can adjust the charging power to the detected device, allowing up to 100W of power with the right match. This means that charging a MacBook Pro 15 takes only 114 minutes, and an iPad Pro 3rd generation takes 129 minutes.High-Speed Data Transmission at 40GB/sThe Baseus Flash 2 cable not only charges devices rapidly but also enables lightning-fast data transmission at a rate of 40GB/s. This is an excellent solution for file transfers and using peripheral devices.Durable Construction with Reinforced Nylon BraidingThe cable's durability is also outstanding, as it is made of aluminum and covered with nylon braiding, making it resistant to damage and wear. You can be confident that it will serve you for a long time. BrandBaseusModelCB000068ColorBlackLength1mMaterialAluminum alloy, nylonWeight59gPower OutputPD 240WTransmission Speed40GB/sVideo Transmission8K@60HzInput/OutputUSB-C

Baseus GaN3 Pro mains charger / power strip (black)Quickly and safely charge your devices with the Baseus GaN3 Pro mains charger / power strip! The product is equipped with 4 charging inputs that offer charging with a maximum power of 100 watts. It also has an AC outlet, which allows you to connect a projector or an electric kettle to electricity, among other things. An advanced protection system ensures the highest level of safety during use. The 1.5m power cable will give you more freedom, while the USB-C/USB-C charging cable you'll find in the set will make charging easier.Instantly renew the energy in your devicesForget about the long wait for your phone or laptop to charge! The charger allows you to charge with up to 100 watts of power! As a result, you can renew 100% energy in your MacBook Pro 2021 16" in about 2.5 hours. In addition, you will find in the set a practical USB-C/USB-C cable, with the help of which you can charge your iPhone 13 Pro Max, among others, in no time.As many as 5 devices at the same timeNeed to charge several different equipment at the same time? No problem! The charger offers as many as 4 USB ports - 2x USB-C and 2x USB, as well as 1 built-in AC outlet. Thus, you will successfully supply energy to up to 5 devices at the same time. You can connect to it a projector, electric kettle, laptop, smartphone, tablet or Nintendo Switch console, among others.Innovative solutionThe improved GaN3 Pro technology offers higher chip integration and power conversion, resulting in higher device performance. In addition, the use of this technology has also influenced the size and weight reduction of the strip.Multi-level protectionYou don't have to worry about safety! The charger has been designed in such a way that using it is completely safe and charging is instantaneous. The product is equipped with special electric shock protection, which will effectively protect you from a shock, for example, when connecting a fan to a power strip. Durable materials from which it was made are resistant to damage and heat.Includedmains charger / power stripUSB-C/USB-C cableModelPSZM000401Rated voltage250V, 50/60HzRated power4000 W MaxRated current16A MaxInput currentAC 200-240V, 50/60Hz, 2.5A MaxOutput currentUSB-C 1/2: 5V/9V/12V/15V⎓3A, 20V⎓5AUSB1/ USB2: 5V/9V/12V/20V⎓3AUSB-C1 + USB-C2: 65 W + 30 W / 30 W + 65 WUSB1 + USB2: 5V⎓3AUSB-C 1/2 + USB 1/2: 65 W+30 WUSB-C1 + USB-C2 + USB 1/2: 60 W + 20 W + 18 WUSB-C1 + USB-C2 + USB1 + USB2: 60 W + 20 W + 15 WPower cord length1.5 mDimensions121 x 48 x 41 mmWeightapproximately 513 gColorBlack

Baseus Grain It allows you to charge your devices in your car without any problems. The high-quality control system provides protection against short circuit, overload, deep discharge, overheating and electromagnetic radiation. The minimal size of the charger does not impede movement while driving. Backlit frame allows easy location of the charger at night. ProducentBaseusModelBaseus Grain Car Charger (Dual USB 5V 3.1A ) BlackProduct codeCCALL-ML01MaterialAluminiumColorBlackCompatibilityUniversalNumber of ports2x USBInput12V - 24VOutput USB2x DC 5V / 2.1AMaximum output powerDC 5V / 3.1A (using both ports)

Gravitational phone holderGravitational Baseus phone holder, mounted on the car ventilation grid. The adjustment range of the holder is 360 degrees. Designed for phones from 63 to 88 cm wide. Automatic side clamps of the cradle automatically adjust to the width of the phone. The cut-out track allows you to connect the charger.ProducentBaseusModelGravity Car MountProduct codeSUYL-01MaterialPlastic, TPE, ABSType of mountingClampedWeight109gColorBlackCompatibilityDevices with width 65-90 mmDimensions76 x52 x48 mmWarranty6 months

High-quality 4K HD cableThe cable is used to transmit video and audio signals without any loss of quality. By using only one cable to transmit audio and video at a time, the number of cables connecting two different multimedia devices is reduced. With its help, you can create cinematic effects in your own home.Functional and practicalThe cable allows you to take a screenshot from your laptop or other device and transfer the image to a larger screen. It provides the highest quality picture and sound. It is perfect not only at home but also at work, at a conference or school.4K qualityCinematic image quality is now possible in your own home with supported 4K and 3D stereo quality. And with HDR quality playback, you can enjoy a better dynamic range and more detail. Get even better special effects.High-quality of the cableThe high-quality of the cable ensures that you don't have to worry about fast and wear and the need to replace it with a new one. It is made of materials resistant to minor mechanical damage. The cable also has gold plated connectors, which provide a stable transmission signal and make it's surface resistant to oxidation and rust.60 HzThe 60Hz refresh rate allows you to fully enjoy your movies at 60 frames per second and faster response times in games, especially in FPS.Producent BaseusProduct codeCAKGQ-A01Interface2x HDMI 2.0Supported resolution4K@60HzBandwidth18GbpsHDMI version2.0Cable length1 mColorBlackMaterialGold-plated connector

FEATURES • USB 3.0 High-Speed Transmission - up to 500MB/s transmission rate, large files transferred in seconds• Support Read for 2TB Hard Drive - 5V power supply easily drives large capacity hard drives• 4-Port Expansion - independent operation for each port, smooth connection to external devices SPECIFICATIONS Material: ABSWeight: ~32gCable Length: 15 cmInput Port: USB-AOutput Port: 4x USB-A 3.0 5GbpsInput: 5V⎓3AOutput: 5V⎓0.9AOperating System: Windows, Apple OS, Linux, Vista