Cost-effective flexibility Due to vendor lock-in, all-flash storage is notoriously expensive, but FS3017 accepts both high-end SAS SSD and the more mainstream SATA SSD. Raw capacity of FS3017 reaches 90TB1. RAID F1 Due to the peculiarities of SSD and RAID technology, a common challenge lies in how to prevent all of the drives from failing at the same time because of the evenly distributed workload. RAID F1 alleviates this problem with a specially designed algorithm to unevenly distribute workload to drives, enhancing the resilience of the storage pool and ensuring your data remains safe. Future-proof networking FS3017 is equipped with two 10GBase-T ports. If you need more horsepower, FS3017 also has two PCIe slots available for adding more Ethernet controllers. Choose between 10GbE, 25GbE, and 40GbE to unlock FS3017's full potential. In addition, you can leverage iSCSI over RDMA technology to enhance iSCSI performance by up to 80% with an optional purchase of supported NIC on FS3017. Data Protection & Disaster Recovery The built-in Snapshot Replication application reproduces 65,000 backup copies to offsite servers, bringing near-instantaneous data protection and ensuring data in shared folders or virtual machines in iSCSI LUNs remain available in the event of disaster.
APCIE-10G is a programmable 10GBase-T / NBASE-T Network card. It supports auto-negotiation which will optimally select among 5 speeds: 10 Gigabit Ethernet (10GbE) 5 Gigabit Ethernet (5GbE) 2.5 Gigabit Ethernet ( 2.5GbE) 1 Gigabit Ethernet (1GbE) or 100 Megabit Ethernet (100MbE). 10GbE requires Cat6a or better cabling is needed. But for 5GbE & 2.5GbE Cat5e cable is sufficient.APCIE-10G supports IP TCP and UDP checksum offloading that enhance performance and lower CPU utilization. The 'Large Send' function (up to 64KB) brings increased network throughput.
Intel® Virtualization Technology for Directed I/O (VT-d)Intel® Virtualization Technology for Directed I/O (VT-d) continues from the existing support for IA-32 (VT-x) and Itanium® processor (VT-i) virtualization adding new support for I/O-device virtualization. Intel VT-d can help end users improve security and reliability of the systems and also improve performance of I/O devices in virtualized environments.Intel® Remote Management Module SupportThe Intel® Remote Management Module (Intel® RMM) allows you to securely gain access and control servers and other devices from any machine on the network. Remote access includes remote management capability, including power control, KVM, and media redirection, with a dedicated management network interface card (NIC).Intel® Node ManagerIntel® Intelligent Power Node Manager is a platform resident technology that enforces power and thermal policies for the platform. It enables data center power and thermal management by exposing an external interface to management software through which platform policies can be specified. It also enables specific data center power management usage models such as power limiting.Intel® Fast Memory AccessIntel® Fast Memory Access is an updated Graphics Memory Controller Hub (GMCH) backbone architecture that improves system performance by optimizing the use of available memory bandwidth and reducing the latency of the memory accesses.Emaplaadi kiipIntel C612Protsessori pesaLGA 2011-v3Toetatud protsessorite arv2Protsessori perekondIntelÜhilduvad protsessoriseeriadXeonIntel® Xeon seeriaE5-2600Süsteemi siini tüüpQuickPath Interconnect (QPI)DIMM-pesade arv16Toetatud mälutüübidDDR4-SDRAMECCJahMaksimaalne sisemälu1020 GBLAN-kontrollerIntel I350Ethernet LAN-i andmeedastuskiirused10,100,1000,10000 Mbit/sEthernet LANJahUSB 2.0 portide arv4Ethernet LAN (RJ-45) pordid4Jadaportide kogus1VGA (D-Sub) portide arv1Integreeritud SAS-pesad6PCI Expressi x16 pesad1PCI Expressi x8 pesad1PCI Expressi pesade versioon3.0Seadmekappi sobiv (sobilik püstikukorpusesse)JahIntel®i Remote Management mooduli tugiYesIntegreeritud BMC koos IPMI-gaJahIntel®i Advanced Management tehnoloogiaJahIntel®i serveri kohandamise tehnoloogiaJahIntel®i Build Assurance tehnoloogiaJahIntel®i Quiet Thermal tehnoloogiaJahIntel®i Efficient Power tehnoloogiaJahIntel®i kiire ligipääs mälule (Fast Memory Access)JahIntel®i paindlik ligipääs mälule (Flex Memory Access)JahIntel®i I/O Acceleration tehnoloogiaJahARK ID89440Intel®i Virtualization Technology Directed I/O seadmeleJahPakendi sisuIntel Server Board S2600TPR w/two 1Gb ports (Intel Ethernet Controller I350); (1) 12Gb/s bridge board (FHWKPTPBGB24); (1) node power board (FH2000NPB24); (1) one slot PCIe x16 riser card (FHW1U16RISER2); (1) front 1U passive heat sinks (FXXEA84X106HS); (1) rear 1U passive heat sink (FXXCA91X91HS); (3) 4056 dual rotor fan (FXX4056DRFAN2); (1) PCI Express x16 rIOM riser and rIOM carrier board kit (AXXKPTPM2IOM); (1) Dual SFP+ port 10GBASE-T I/O module (AXX10GBNIAIOM); (1) airduct; (1) 1U node traySATA-ühenduste koguarv6Laius172,7 mmSügavus480,1 mmIntegreeritud graafikaadapterJahCNR 1. ava radade arv16CNR 2. ava radade arv16SihtturgCloud/Datacenter
SuperServer Benefits:- Uncompromising Quality Control- Most Comprehensive Line of Rackmount/Tower Servers- Best Selection of High-End Servers - Itanium, Xeon & P4- Redundant Components (virtually eliminating system downtime)- Best Price/Performance Ratio- Superior Product Design (all under one roof)- Consistently First-to-Market- Maximized Performance- Reduced Total Cost of Ownership (TCO)- Top-Notch Finishing Materials- 3-Year Limited Warranty- 24-Hour Server SupportThese benefits combined with an excellent track record have earned Supermicro a reputation as a true leader in the high-end PC/server industry. After all, Supermicro provides the most outstanding product line in the industry, ranging from single Pentium 4 and dual Xeon to quad Xeon MP and dual Itanium systems. Their proven high level of quality and performance has made SuperServers the platform of choice for supercomputer clusters and enterprise databases as well as business-critical, front-end server applications.Emaplaadi kiipIntel C612Protsessori pesaLGA 2011 (Socket R)Toetatud protsessorite arv1Protsessori perekondIntel Xeon E5 v3Ühilduvad protsessoriseeriadXeonIntel® Xeon seeriaE5-1600,E5-2600Maksimaalne vahemälu45 MBDIMM-pesade arv8Toetatud mälutüübidDDR4-SDRAMECCJahMaksimaalne sisemälu512 GBMälu pinge1.2 VMaksimaalne RDIMM-mälu32 GBToetatud RDIMM-i taktsagedused2133,1333,1600,1866 MHzMälusiin72 bittiToetatud kõvaketaste arv8Käigultvahetusega kõvaketta lahtridJahRAID-tasemed0, 1, 10Toetatud kõvakettasuurused3.5"Kõvaketta ühenduse tüüpJada ATA IIILAN-kontrollerIntel I350AM2Etherneti vaskkaablite tehnoloogia1000BASE-T,100BASE-TX,10GBASE-TEthernet LANJahUSB 2.0 portide arv2Ethernet LAN (RJ-45) pordid3USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2Jadaportide kogus1VGA (D-Sub) portide arv1IPMI LAN (RJ-45) portJahSATA III ühenduste arv8Pardagraafika adapteri mudelAspeed AST2400BIOS-i tüüpAMIBIOS-i mälu suurus8 MBACPI versioon2.0BIOS-i omadusedSMBIOS 2.3Kujutegur2UToote värvHõbeLED-indikaatoridJahSisse/välja lülitiJahKeretüüpPüstik (2U)Optilise seadme tüüpEiToiteallikas500 WÜleliigse toite (RPS) tugiJahKasutamistemperatuur (T-T)10 - 35 °CHoiustamistemperatuur (T-T)-40 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)8 - 90 protsentiSuhteline õhuniiskus (H-H) hoiustamisel5 - 95 protsentiLaius437 mmSügavus648 mmKõrgus88,9 mmKaal15,4 kg
The TS-963X is an affordable NAS for small and medium-sized businesses (SMBs) with AMD Embedded G-Series GX-420MC quad-core 2.0 GHz processor, 9 drive bays and a built-in 5-speed 10GBASE-T port for up to 10Gb connectivity. Four 2.5-inch drive bays can be used to install SSDs to enable caching and Qtier technology. One built-in 5-speed 10GBASE-T port (10G/5G/2.5G/1G/100M) also increases productivity of businesses with existing Cat 5e/6 cables, without extra costs or additional installation procedures. Combined with several QNAP technologies including VJBOD, Container Station, and Virtualization Station, the TS-963X has the potential to empower a wide range of business applications and can also be easily expanded to fit future data storage requirements.
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, LSZHConnecteur anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal stableGarantie 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le matériau de gaine sans halogène du câble LSZH rend le produit utilisable dans les lieux publics grâce à sa faible émission de fumée et à la suppression des émissions toxiques d'halogène.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Câble de brassage à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, TPEConnecteur intégré sans accroc pour la protection du verrouPlaqué ou broches pour une meilleure conductivité et l'élimination de la perte de signalGarantie de 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le TPE utilisé comme matériau pour la gaine offre une flexibilité accrue et facilite la manipulation des câbles.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Product kirjeldus: BUFFALO LGY-PCIE-MG - network adapter seadme tüüp: Network adapter Form Factor: Plug-in kaart - low profile liides (Bus) Type: PCI Express x4 Ports: 1/2.5/5/10GBase-T mõõtmed (WxDxH): 12.1 cm x 1.9 cm x 8.4 cm kaal: 65 g Localisation: Worldlai Cabling Type: Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 10GBase-T, Ethernet 2.5GBase-T, Ethernet 5GBase-T Data Link Protocol: 100Mb LAN, GigE, 10 GigE, 5 GigE, 2.5 GigE Data Transfer Rate: 10 Gbps maht: Jumbo frame size: 4088/9014 byte võrguseade / Transport Protocol: CSMA/CD Compliant Standards: IEEE 802.3u, IEEE 802.3ab, IEEE 802.3an, IEEE 802.3bz System Requirements: Microsoft Windows Server 2012 (64-bit), Microsoft Windows Server 2012 R2 (64-bit), Microsoft Windows 7 / 8.1 / 10 (32/64 bits), Microsoft Windows Server 2016 (64-bit) Manufacturer Warranty: 3-year garantii
Cat6a kaabliga varjestatud F/FTP LSOH S-Foil CPR Euroclass B2ca projekteeritud ja toodetud nii, et see vastaks ja ületaks ISO, CENELEC ja TIA standardeid ning tarnitakse 500 m rullil. Cat 6A täielikult varjatud (F/FTP) kaabel viib vasest taristu jõudlusvõimalused uuele tasemele. See tagab EA-klassi / laiendatud 6. kategooria lingi jõudluse kuni 90 meetri kaugusel, mis toetab rakendusi, sealhulgas 10GBASE-T, 10 Gigabit Ethernet.
Toote kirjeldus inglise keeles:The Cisco® 10GBASE SFP+ modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.Main Featuress of Cisco 10GBASE SFP+ modules include:-Smallest 10G form factor.-Supports 10GBASE Ethernet.-Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch.-Provides flexibility of interface choice.-Supports "pay-as-you-populate" model.-Supports the Cisco quality identification (ID) Features that enables a Cisco switch to identify whether the module is certified and tested by Cisco.-Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible.
Seda Delocki SFP+ moodulit saab kasutada 10 gigabitise switchide ja meedia konverterite laiendamiseks koos vaba SFP+ pesaga kiudoptilise liidese abil. Spetsifikatsioon • Ühendused: 1 x SFP isane > 1 x LC Duplex emane • Andmeedastuskiirus: 10 Gigabit Ethernet kuni 10 Gbps • Ühemoodilise kiu jaoks • Kiud: 9/125 µm • 1310 nm lainepikkus • Kuni 10 km • Digital Diagnostic Monitoring Interface (DDM) • Töötemperatuur: 0 °C ~ 70 °C Nõuded süsteemile • Vaba SFP+ pordiga seade Pakendi sisu • SFP+ moodul
Seda Delock SFP+ moodulit saab kasutada 10 gigabitise switchi või meedia konverteri laiendamiseks vaba SFP pesaga optilise kiudliidese kaudu. Spetsifikatsioon • Multi-Mode-Fiber, 850 nm • Kuni 300 m 50/125 µm • LC-duplekspistik • Edastuskiirus kuni 10 Gbit/s • Ühildub SFF-8431-ga • Saab kasutada SFP+-ga ühilduvates 1 gigabitistes switchides • Digitaalse diagnostika seireliidesega (DDM) • Töötemperatuur: 0 kuni +70° C Nõuded süsteemile • Switch vaba SFF-pesaga Pakendi sisu • SFP+ moodul
