The EK-Quantum Vector FE RTX 3070 backplate is designed for the EK-Quantum Vector RTX FE 3070 graphics card cooler of the same name. A backplate is particularly suitable for giving the graphics card more stability. Since the backplate is kept very simple, it is rounded off by a small but elegant EK logo. Technical Data Material: Aluminium Color: Black Scope of Delivery EK-Quantum Vector FE RTX 3070 Backplate - Black Mounting mechanism (the backplate screws are on the other side - separate compartment) Thermal pads
The EK-Quantum Vector FTW3 RTX 3080/3090 backplate is intended for the EK-Quantum Vector FTW3 RTX 3080/3090 graphics card cooler of the same name. A backplate is particularly suitable for giving the graphics card more stability. As the backplate is kept very simple, it is rounded off by a small but elegant EK logo. Technical Data Material: Nickel-Plated Aluminium Color: Nickel Scope of Delivery EK-Quantum Vector FTW3 RTX 3080/3090 Backplate - Nickel Mounting mechanism (the backplate screws are on the other side - separate compartment) Thermal pads
EK-Quantum Vector N+ RX 6800XT/6900XT is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for SAPPHIRE NITRO+ 6800XT and 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector N+ RX 6800XT/6900XT water block for SAPPHIRE NITRO+ GAMING RX 6800 XT and 6900 XT GPUs EK-Quantum Vector N+ RX 6800XT/6900XT water block is compatible with SAPPHIRE NITRO+ Radeon, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum N+ Vector RX 6800XT/6900XT D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 8 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the N+ 6800XT/6900XT water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 285x149x16.5mm Enclosed EK-Quantum Vector N+ RX 6800XT/6900XT series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
EK-Quantum Vector Master RX 6800XT/6900XT - Nickel + Acetal is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for AORUS Master 6800XT and 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Master RX 6800XT/6900XT water block for AORUS Master RX 6800 XT and 6900 XT GPUs EK-Quantum Vector Master RX 6800XT/6900XT water block is compatible with AORUS Master Radeon RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of stealthy black POM Acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Master Vector RX 6800XT/6900XT D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 7 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Master 6800XT/6900XT water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 303,5x135,5x16,5mm Enclosed EK-Quantum Vector Master RX 6800XT/6900XT series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
EK-Quantum Vector TUF RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ASUS TUF RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector TUF RX 6800/6900 water block for ASUS TUF GAMING RX 6800 and 6900 GPUs EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS TUF GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of durable POM acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum TUF Vector RX 6800/6900 D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the TUF 6800/6900 water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 300x158x16.5mm Enclosed EK-Quantum Vector TUF RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate D-RGB - Acryl is a cutting-edge addition to the EK® Quantum Line. It is made to complement the existing EK-Quantum Vector Trinity RTX 3080/3090 water blocks and actively cool the backside of all ZOTAC® GeForce RTX™ 3080 and 3090 Trinity GPU. EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate EK-Quantum Vector Trinity RTX 3080/3090 active backplate links the water block and the active backplate part with a new terminal, which replaces the stock terminal coming with your water block. This way the whole enclosure requires only one inlet and one outlet, removing any unneeded additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks allowing maximum cooling. The Vector Active Backplate directly cools the PCB hotspots that are found on the backside of the GPU core and the VRM (voltage regulation module). On the RX 3090, the VRAM located on the backside is cooled, while the RTX 3080 gets cooling for the PCB located around the front-mounted VRAM. Cooling liquid is channeled over all these critical areas. These newly developed active backplates feature a fin array with 6 wide channels allowing for very low flow restriction. This in turn allows overall lower temperatures, while the active backplate gets more than sufficient surface area for heat transfer. The base of the active backplate is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. The rest of the backplate is made of nickel-plated aluminum and it does not come in contact with the liquid. These Vector Active Backplates also feature acrylic terminals that match the top cover. The watertight sealing is ensured by high-quality EPDM O-rings. D-RGB lighting on EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Technical Specification Dimensions: (LxHxW) - 231x124x15mm D-RGB cable length: 500mm D-RGB LED count: 8 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Enclosed EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate D-RGB - Acryl Necessary mounting screws, nuts, and washers 1x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Warning: EK only guarantees compatibility with included EK-brand thermal pads. Installation process, cooling performance and block contacts are tested exclusively with EK-brand thermal pads. Listed thermal pad thicknesses apply only to EK thermal pads which are included in the package. EK does not guarantee compatibility with aftermarket alternatives for thermal interface material.
Backplate für GPU-Wasserkühlung, für EK-Quantum Vector RE RTX 3080/3090, aus Acetal, bietet erhöhte Stabilität, mit Wärmeleitpads, für aktive Kühlung des PCBs
Die CPU-Wasserblöcke der EK-Quantum Velocity² Serie beinhalten die nächste Generation der OptiFlow Kühlung. Sie verwenden eine spezielle Kombination aus Montagedruck und Coldplate-Geometrie, die auf das IHS- und Die-Layout von Intel LGA 1700 Sockel-Prozessoren zugeschnitten ist. Dank der geringen hydraulischen Durchflussbeschränkung können diese Produkte in Setups mit schwächeren Wasserpumpen oder niedrigeren Pumpendrehzahlen für einen noch leiseren Betrieb eingesetzt werden, wobei sie dennoch Spitzenleistungen erzielen! Technische Daten: D-RGB Kabellänge: 50cm D-RGB-Anschluss 3-poliger 5V-Digital-LED-Header (Pinout: +5V | Digital | Blockiert | Masse) CPU-Sockel-Kompatibilität: Intel LGA 1700 Lieferumfang: EK-Quantum Velocity² CPU-Wasserblock Exact Mount Universal-CPU-Montagemechanismus EK-Velocity² Rückwand 2.5mm Inbus(HEX)-Schlüssel Jetplate für LGA 1700 Wärmeleitpaste Thermal Grizzly Hydronaut (1g)
Die CPU-Wasserblöcke der EK-Quantum Velocity² Serie beinhalten die nächste Generation der OptiFlow Kühlung. Sie verwenden eine spezielle Kombination aus Montagedruck und Coldplate-Geometrie, die auf das IHS- und Die-Layout von AMD AM4-Sockel-Prozessoren zugeschnitten ist. Dank der geringen hydraulischen Durchflussbeschränkung können diese Produkte in Setups mit schwächeren Wasserpumpen oder niedrigeren Pumpendrehzahlen für einen noch leiseren Betrieb eingesetzt werden, wobei sie dennoch Spitzenleistungen erzielen! Technische Daten: D-RGB Kabellänge: 50cm D-RGB-Anschluss: 3-poliger 5V digitaler LED-Anschluss (Pinout: +5V | Digital | Blockiert | Masse) Abmessungen: (LxHxB) - 89x113,5x34mm CPU-Sockel-Kompatibilität: AMD AM4 Lieferumfang: EK-Quantum Velocity² CPU-Wasserblock Exact Mount Universal-CPU-Montagemechanismus EK-Velocity² Rückwand 2.5mm Inbus(HEX)-Schlüssel Jetplate für AM4 Sockel CPUs Wärmeleitpaste Thermal Grizzly Hydronaut (1g)
The Protium expansion tank from Singularity Computers is a 100mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 139mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 139 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Silver, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 100 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
The Protium expansion tank from Singularity Computers is a 150mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 189mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 × 60 x 189 mm (L x W x H) Diameter: 60 mm Material: acrylic (reservoir, lid, base), aluminium (retention rings) Color: transparent, silver/li> Ports: 7x G1/4" Scope of Delivery 1x 150 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
A Y-cable to connect 3x4-Pin PWM fans to one 4-Pin PWM connector. As fan control via the Mainboard with a PWM fan is much more affordable than a fan controller, this cable is perfect to give more flexibility. The extension cable is sleeved with a black mesh which additionally protects the cable and looks great! This further expands the lifespan of the cable. The ends towards the connectors are fixated with heatshrink for a clean finish. A white marking on one of the split cables shows from which cable the rpm signal is transmitted. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 1x 4-Pin PWM male 3x 4-Pin PWM female Colour: Black sleeve, black connectors, black heatshrink Dimensions: Overall 60cm Conforms with RoHS Extent of delivery: 1x Phobya Y-cable 4-Pin PWM to 3x4-Pin PWM 60cm - black
A Y-cable to connect 4x4-Pin PWM fans to one 4-Pin PWM connector. As fan control via the Mainboard with a PWM fan is much more affordable than a fan controller, this cable is perfect to give more flexibility. The extension cable is sleeved with a black mesh which additionally protects the cable and looks great! This further expands the lifespan of the cable. The ends towards the connectors are fixated with heatshrink for a clean finish. A white marking on one of the split cables shows from which cable the rpm signal is transmitted. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 1x 4-Pin PWM male 4x 4-Pin PWM female Colour: Black sleeve, black connectors, black heatshrink Dimensions: Overall 60cm Conforms with RoHS Extent of delivery: 1x Phobya Y-cable 4-Pin PWM to 4x4-Pin PWM 60cm - black
Deco M5 uses the latest technology to create a wireless mesh to paint your home in Wi-Fi. Mesh technology relies on several units working together to replace your router and create seamless Wi-Fi in every room. Each Deco mesh router can work independently, with in the network, to cover up to 4,500 sq. ft. of fast Wi-Fi. For even more coverage, you can use up to 9 Deco M5 units on a single network.
Achieve an Incredibly Shallow Depth-of-FieldThe XF 50mm f/1.0 R WR consists of 12 lens elements in nine groups and also contains one aspherical element and two ED elements to achieve optimum control of spherical aberration. Used at or near to its maximum F1.0 aperture, XF 50mm f/1.0 R WR can produce an astonishingly narrow depth-of-field. Its precision-engineered, rounded diaphragm produces large, smooth bokeh for a professional look, allowing you to create portraits with a striking simplicity and an almost three-dimensional quality with wonderful edge-to-edge sharpness. You can use this new power in selective focus to keep only the subject’s eyes in focus and make captivating close-up character studies. But it’s not just for portraits. Take this lens out onto the street or into a lifestyle session and you’ll turn cluttered locations into clean backdrops with unrivaled subject separation.Be Ready to Make Images More Easily in Low-Light ConditionsThe very wide maximum aperture on XF 50mm f/1.0 R WR means there are more options when it comes to making images in low-light conditions. At night, or in darkened interiors, XF 50mm f/1.0 R WR offers the widest apertures yet seen on an XF Lens, allowing more light to be drawn in to make an image. XF 50mm f/1.0 R WR lens also easily achieves fast shutter speeds that freeze movement and keep ISO settings lower for detail-rich results. Alternatively, combine high ISO settings with the F1.0 aperture for incredible versatility and use in other low-light applications like astrophotography.Precise Focus for Those Critical MomentsTo make the most of its super-shallow depth-of-field, focusing must be precise. As a result, XF50mmF1.0 has a focus ring that is eight times more accurate than any previous XF Lens. This makes it possible to change the focus from the minimum focusing distance to infinity very precisely. For this, XF 50mm f/1.0 R WR uses 120º of rotation in its focusing ring to let you focus manually without error – and achieve accurate focus when using your X Series camera’s Focus Peaking and Focus Assist modes. The 120º of rotation also makes autofocus movements notably precise and deliberate, while the lens’s engineering is designed to minimize focus shift effects when making images.
Kui e-sport ja mängud on Sinu teema, siis Lenovo IdeaCentre Gaming5 lauaarvuti on täpselt see mida vajad. Sel on võimekas AMD protsessor, mitmete ühendusliidestega 13.6L korpus ja uus Windows 11. Tegemist pole aga pelgalt mänguriarvutiga, sest masinal on piisavalt jõudlust ja mälumahtu, et terve pere saaks nautida meelelahutust, vaadata videoid ja filme, jagada andmeid ning teha töö- või kooliülesandeid. Protsessor : AMD Ryzen 5 5600G Videokaart : NVIDIA GeForce GTX 1660 SUPER 6GB Salvestusmälu/Operatiivmälu : 512 GB SSD; 8 GB RAM Op.süsteem/Ühenduvus : Win 11 Home; Bluetooth; WiFi; USB-C
Praktiline tuulekaitse mikrofonile; Vähendab tuulest tingitud müra; Akustiliselt läbipaistev; Värviline sünteetiline karv; Sobib Rode VideoMicro & VideoMic Me mikrofonidele
Praktiline tuulekaitse mikrofonile; Vähendab tuulest tingitud müra; Akustiliselt läbipaistev; Värviline sünteetiline karv; Sobib Rode VideoMicro & VideoMic Me mikrofonidele
Praktiline tuulekaitse mikrofonile; Vähendab tuulest tingitud müra; Akustiliselt läbipaistev; Värviline sünteetiline karv; Sobib Rode VideoMicro & VideoMic Me mikrofonidele
7.68 TB; Ketta vorm-faktor: 2,5"; Välkmälu tüüp: TLC; Ühenduse tüüp: SATA III; Maksimaalne lugemiskiirus: 550 MB/s; Maksimaalne kirjutamiskiirus: 510 MB/s;
USB 2.0 male (type A) > USB 2.0 female (type A)suitable for devices with USB connectionUSB 2.0 cable for synching and chargingHi-speed data transmission up to 480 Mbit/sextension cable compatible with USB-A connectors
USB 2.0 Hi-Speed kaabel, must USB 2.0 isane (tüüp A) > USB 2.0 mini isane (tüüp B, 5-pin) Sobib paljude USB-keskuste, kaardilugejate, navigatsiooniseadmete, kaamerate või MP3-mängijate jaoks. Sünkroonimiseks ja laadimiseks Hi-Speed andmeedastus kuni 480 Mbitti
USB 2.0 male (type A) > USB 2.0 male (type A)USB 2.0 cable for synching and chargingHi-speed data transmission up to 480 Mbit/ssuitable for many mass storage devices and peripherals such as hard disks or HUBs
Width: 600 Accessories included: RACK cabinet Mounting set Front lock Rubber shock-absorbing feet Dimensions: 600 x 500 x 450 mm Weight: 18.3 Other features: Maximum static load: 70kgAdditional information: Front door glazed with a lock Optional installation of plinth to enable cabinets fixation, under-base cable entry/ventilation Removable side panels to easy maintain Easy assembly Robust construction
Width: 600 Accessories included: RACK cabinet Mounting set Front lock Rubber shock-absorbing feet Dimensions: 600 x 500 x 600 mm Weight: 22.1 Other features: Maximum static load: 70kgAdditional information: Front door glazed with a lock Optional installation of plinth to enable cabinets fixation, under-base cable entry/ventilation Removable side panels to easy maintain Easy assembly Robust construction
CAT 5e võrgukaabel, F / UTP, sinine vasega kaetud alumiiniumtraat (CCA) CAT-kaablid edastavad signaale tippkvaliteediga suurel kiirusel, tagades alati stabiilse ühenduse. Kvaliteetsed sisejuhid, vastupidav kaablikate ja täpselt sobivad pistikud eristavad meie ühenduskaablite ja pistikute portfelli. Goobay pakub alati teie võrguvajaduste jaoks täiuslikke tooteid – olenemata sellest, kas soovite luua kodu- või ettevõttevõrku. Eeljuhtmega varjestatud CAT 5e LAN-kaabel 2x RJ45 pistikuga võrgukomponentide ühendamiseks Fooliumekraan (F / UTP) hoiab ära välistest allikatest (ristvarras) tulenevad häired ja tagab ideaalse signaalijaotuse minimaalsete kadudega Kvaliteetne vaskkattega alumiiniumtraat (CCA) ja kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse RJ45 pistikute lukustuskaitse takistab riivi kinnijäämist või lahti murdumist, aidates tagada usaldusväärse Interneti-ühenduse CAT 5e võrgukaabel sobib Gigabit Ethernetile kiirusega kuni 10/100/1000 Mbit/s Võrgupistik: paaride järjestus vastavalt EIA / TIA 568B, kaabli konstruktsioon: keerdpaarkaabel Etherneti kaabli pikkus, mis on näidatud ülevormitud õhukesel tõmbekaitsel
Compatible with: Xiaomi Mi Max 2 Weight: 10 Other features: - Perfectly matched to the phone- It does not bold the phone- Provides full access to all phone keys and connectors- Protects against damage and scratches
The HEATKILLER® IV PRO for Intel Xeon is a high-end cooler for processors with socket 3647. The cooler has been completely redeveloped and optimally tailored to the requirements of this high-performance platform. The base plate of the HEATKILLER® IV PRO for Intel Xeon covers the entire heat spreader of a Xeon processor and can thus absorb the waste heat that occurs. The cooling geometry is extremely large at 48x40mm. The flow is perfectly optimized for the Xeon architecture and thus achieves outstanding cooling properties. Thanks to the large-volume and rounded channels, the flow resistance is also extremely low. The cooler has 5 full G1 / 4 " connections and can thus be integrated into a wide variety of circuits and systems. For installation in tower systems, there are inlet and outlet ports on the top of the cooler, so that it can be connected like a classic CPU cooler. Thanks to the low height, the cooler can also be used in 1U server systems without restriction: an inlet and two optional outlets on the front of the cooler enable extremely compact and space-saving installation. Thanks to its modular structure, the top can also be rotated 180 degrees in the mounting frame, so that the orientation of the inlet can be chosen variably. Thanks to the low flow resistance, the cooler is also ideally suited for multi-CPU systems. The assembly takes place according to the specifications of the CPU manufacturer. This guarantees optimal contact pressure. Compatibility: Intel XEON socket 3647 Technical specifications: Material upper part: POM Base plate material: copper - nickel-plated Material brackets: stainless steel Material mounting accessories: brass - nickel-plated Dimensions cooler (L x W x H): 86 x 59 x 25 mm Dimensions of bracket Narrow ILM (L x W): 107 x 85 mm Weight: 350g Seals: NBR 70 Connection thread: 5x G ¼ inch (2x IN, 3x OUT) Distance between the connection threads (top): 25mm Distance between the connection threads (side): 26mm Scope of delivery: HEATKILLER® IV PRO for Intel Xeon (Narrow ILM) Mounting material assembly Instructions
Capacity: 0.7 GB Other features: Superior resistance to UV irradiation. 100 years archival life. Lowest error rate against a range of CD writers. Lifetime Warranty. Package type: Single Pack Slim Native capacity: 700 MB Type: CD-R Extra Protection Net weight: 0.02 kg Gross weight: 0.06 kg Warranty: 0 month(s) Producer product name: CD-R Extra Protection CD write speed: 52 x Capacity: 80min/700 MB ml Write speed: 52 x MB/s Package: Single Pack Slim Case Gross depth (mm): 5.00 mm Gross width (mm): 143.00 mm Gross height (mm): 125.00 mm PET: 41.00 g Plastic (No PET): 1.00 g Packing quantity: 200.00 pc(s) Gross depth master carton: 560.00 mm Gross width master carton: 290.00 mm Gross height master carton: 145.00 mm Net weight master carton: 3.20 kg Tare weight master carton: 8.84 kg Palette Qty: 14400.00 pc(s) Volume (m3): 0.00 m³ Tare weight (kg): 0.04 kg
The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance. Connection options There are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1 The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2 The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!) The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design. Brilliant illumination Six addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility: - Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 Founders Edition with backplate (article number: 11941) - Alphacool Eiswolf 2 AIO 360mm RTX 3090 Founders Edition with backplate (article number: 14463) Technical data L x W x H 206,54 x 120,71 x 13,3 mm Material backplate copper, nickel-plated Material cooler acrylic Threads Water cooling 2x G1/4" | 2x 5/3mm tube connection Illumination 6x digital addressable RGB LEDs Power connector digital aRGB LEDs 3-pin JST (male & female switch) Power digital aRGB LEDs 5V Maximum working temperature 60 °C Pressure tested 0,8 Bar Weight 704 g
The Alphacool Aurora Acryl GPX-A 6800(XT) Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-A 6800(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-A 6800(XT) cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-A 6800(XT) Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A 6800(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-A 6800(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-A 6800(XT) Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate Technical data: L x W x B: 130 x 262,5 x 24,5 mm Material cooler: Nickle plated copper Material top: Acryl Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: AMD graphic cards Compatibility list: - AMD Radeon 6800 Reference Design - AMD Radeon 6800 XT Reference Design - AMD Radeon 6900 XT Reference Design - AMD Radeon 6950 XT Reference Design More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT/6900XT Reference with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT/6900XT Reference with Backplate
