DJI Mavic 4 Pro Intelligent Flight Battery Provides a max flight time of 51 minutes, allowing you to explore more of your surroundings and fly with peace of mind.
DJI Matrice 4D Series Battery. The 149.9Wh high-capacity battery provides up to 54-min forward flight time or 47-min hovering time for the DJI Matrice 4D series drones.
DJI Matrice 4D Series 240W Charging Hub Connect to three Matrice 4D Series Batteries simultaneously and charge them in sequence from high to low battery level. The DJI Matrice 4D Series 240W Charging Hub can be used with the DJI 240W Power Adapter or DJI Power 1000 portable power stations and can connect to three Matrice 4D Series Batteries simultaneously and charge them in sequence from high to low battery level. The battery charging hub supports both Standard Mode and Ready-to-Fly Mode. Standard Mode charges each battery to 100% sequentially. Ready-to-Fly Mode charges each battery to 90% sequentially and maintains that level for quick use.
Osmo Hanging Neck Mount Max. It uses a unique silica gel material that is comfortable to wear and can reshape freely, allowing you to take FPV footage easily. Larger size design for more comfortable wear, paired with a strap for added stability. In The Box: Osmo Hanging Neck Mount Max × 1, Chest Strap × 1, Osmo Locking Screw × 1
Multi-Functional Charging Dock Parts-Disposable Dust bag-English-MOQ20-White 3 bags. OC0/Q70+/Q70 Max+/OC5/Q75+/Q75 Max+/Q55+/O35/S75 MaxV Ultra/S70 Pro Ultra/S80 Pro Ultra/S85 Pro Ultra/OC0-D/S80+/Q80 Max+/OC5-D/S85+/Q85 Max+/Q55 Pro+/S70 Max Ultra/S75 Max Ultra/Q55 Max+/Q55 DuoRoller+
SuperSpeed USB AXAGON ADSA-SN COMPACT HDD/SSD DOCK docking station easily and quickly connects any SATA disk to your computer. A handy helper for the easiest and fastest way of connecting SATA disks to your computer - just plug the disk into the base. Automatic installation can be done even by the layman. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports sleeping of both the connected disks and station. Low laid centre of gravity of the docking station for good stability. Rubber feet to reduce vibrations. Modern minimalist design of housing with aluminium casing. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB rate of up to 5 Gbit/s. Connection via micro USB type B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, supports 3.5" HDD, max. disk capacity all without limitation, max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down after period of inactivity lasting 15 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. cable micro USB-B / USB-A 80 cm long is included. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Power switch. Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Station dimensions 130 x 65 x 59 mm. Weight 190 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 HDD dock, micro USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with clearly indicated parameters.
The Neomounts by Newstar floor stand, model NS-M3800BLACK is a mobile floor stand for flat screens up to 100" (254 cm). This mobile stand is a great choice for space saving placement or when wall-, ceiling mounting or desk placement is not an option. This cart stretches your investment by serving a variety of projection needs by sharing a large display over multiple rooms. Get optimal positioning for both standing and seated audiences, in any application, in any part of your location. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the stand nice and tidy. Neomounts by Newstars' floor stand, NS-M3800BLACK holds your TV, AV equipment and even hides your cables. The casters allow the stand to move it to where you need it. Easily roll this cart through doorways and over thresholds. The floor stand also comes with four leveling feet. Neomounts by Newstar NS-M3800BLACK is suitable for screens up to 100" (254 cm). The weight capacity of this product is 100 kg. The stand is suitable for screens that meet VESA hole pattern 400x400 to 1000x600mm. All installation material is included with the product. Min. screen size: 60 inch Max. screen size: 100 inch VESA minimum: 400x400 mm VESA maximum: 1000x600 mm Functionality Type: Mobile Width: 110 cm Depth: 68 cm Height: 153 cm Height adjustment: Manual
DJI Matrice 3D Series Charging Kit Discover the DJI Matrice 3D Series charging kit, the essential accessory for maximizing the efficiency of your flight operations. Designed specifically for the Matrice 3D Series intelligent flight battery, this kit lets you charge one battery at a time, ensuring efficient and rapid battery rotation. With a power rating of 100 W and a USB-C connection, it offers fast, secure charging. This charger is suitable for a wide range of conditions, with an optimum charging temperature from 5° to 40°C, guaranteeing reliable performance even in harsh environments. The DJI Matrice 3D Series charging kit is not only robust but also incredibly easy to use, making it perfect for professionals on the move. Increase productivity and minimize downtime with this charging kit, designed to meet the demands of the most demanding users. Never let battery levels interrupt your critical projects. Choose efficiency and reliability with the DJI Matrice 3D Series charging kit.
DJI Neo Intelligent Flight Battery provides 18-minute flight time to allow the drone to perform at least 20 palm takeoff and landing for excursions in succession. Its lightweight design does not compromise battery life. Carry a few extra batteries to ensure you never miss a moment. Battery for DJI Neo Capacity: 1435 mAh Weight: approx. 45 g
\The introduction of DDR5 memory is bringing in a huge increase in performance for every server or workstation using this technology. The clock speed starts with a 50% increase over the last generation of DDR4 memory and already shows additional speed bumps above that to 6400MT/s. The underlying architecture has been enhanced as well to give additional boosts to the overall system performance. Of course, every application will respond differently to these changes, but for any application using high CPU core counts and is already bandwidth limited by the memory in a DDR4 system, the performance improvement should be shocking.If you consider the CPU of your server or workstation the brains, then the system memory would be considered the lifeblood of the system. The amount of memory in your system will dictate the overall performance. Generally speaking, the more memory in the system, the higher the overall performance you can expect. System memory installations or upgrades are incredibly easy with the socket used on the motherboard. No special skills or tools are needed to complete the task. Servers supporting virtualization applications are highly dependent upon the amount of memory installed. Multiple virtualized servers can coexist on the same physical server as long as the total amount of memory installed can meet the need of each individual virtualized server.When a server or workstation is running an application that exceeds the memory of the server, it is forced to offload portions of the application to the online storage system like an SSD. When the application needs to swap portions of itself out and bring in other parts from the SSD, the latency can increase significantly. By ensuring the system has enough memory to hold the entire database or application, the overall application latency can be greatly reduced, sometimes by orders of magnitude. Micron Server and Workstation DRAM modules run through an extensive line of tests at both the component and module level before they are released to partners and customers. Enterprise and Cloud customers can rest assured that the modules leave the factory only after meeting the exacting JEDEC specifications established for enterprise-class systems.
Micron 9550 PRO 15360GB NVMe U.2 (15mm) Enterprise SSD The Micron® 9550 SSD leads the pack of data center PCIe Gen5 SSDs for AI-critical workloads. The secret to success in the AI race is training AI models faster. The difference between winning and losing can be measured in microseconds. For Graph Neural Network (GNN) training, the Micron 9550 offers up to 60% faster performance and 43% less energy than the competition. When combined with form factor (U.2 and E3.S) and capacity (3.2 to 30.72TB3) flexibility, users can tailor their system architecture to best meet their growing AI needs. These gains in performance and efficiency would not be possible without a fully vertically integrated solution, leveraging Micron-designed controller ASIC, 8th-generation NAND, and DRAM.
KIOXIA PM7-R Series (2.5-inch) Enterprise SAS Read Intensive SSD KIOXIA PM7-R Series 24G SAS Enterprise SSD is optimized for read intensive applications, including web services, data warehousing, streaming media and video on demand. The series provides high levels of performance, reliability and endurance, and is designed to minimize total cost of ownership. Featuring KIOXIA 112-layer BiCS FLASH™ 3D flash memory, this 7th generation enterprise SAS SSD PM7-R Series offers 1 DWPD (Drive Writes Per Day) with capacities up to 30.72 TB.
Micron 9550 MAX 12.8TB NVMe U.2 (15mm) Enterprise SSD The Micron 9550 SSD leads the pack of data center PCIe Gen5 SSDs for AI-critical workloads. The secret to success in the AI race is training AI models faster. The difference between winning and losing can be measured in microseconds. For Graph Neural Network (GNN) training, the Micron 9550 offers up to 60% faster performance and 43% less energy than the competition. When combined with form factor (U.2 and E3.S) and capacity (3.2 to 30.72TB3) flexibility, users can tailor their system architecture to best meet their growing AI needs. These gains in performance and efficiency would not be possible without a fully vertically integrated solution, leveraging Micron-designed controller ASIC, 8th-generation NAND, and DRAM.
DJI Matrice 4 Series Charging Hub is designed for use with Matrice 4 Intelligent Flight Batteries. It can charge up to four Intelligent Flight Batteries in sequence from high to low power level. The battery charging hub supports both Standard Mode and Ready-to-Fly Mode. Standard Mode charges each battery to 100% sequentially. Ready-to-Fly Mode charges each battery to 90% sequentially and maintains that level for quick deployment.
DJI Mavic 240 W Power SupplyThe DJI Mavic 240 Watt Power Supply enables simultaneous charging of the smart batteries and control instruments for the DJI Mavic 4 Pro, significantly reducing the time needed to prepare the equipment for operation. With 240 watts of output power, it provides fast and efficient power restoration. What's more, an additional USB-C port allows you to power mobile devices, and the compact case with built-in mini SDC cable makes it easy to transport and store the product. ManufacturerDJIManufacturer codeCP.MA.00000886.01Input100-240 V AC, 50-60 Hz, up to 3 AOutputUp to 240 watts (total), up to 65 watts (USB-C)*The maximum output power of the USB-C port is limited to 45 watts when two devices are charged simultaneously. Charging times may be longer than usual.Charging timesSmart battery for DJI Mavic 4 Pro (using parallel charging hub for DJI Mavic 4 Pro, with no other devices connected to the charger or USB-C port of the hub):Charging 1 battery: approximately 51 minutes;Charging 3 batteries: about 90 minutes (200-240 V input), about 110 minutes (100-127 V input);*Charging time is measured in a test environment at 25°C. Actual charging time may increase due to higher ambient temperatures or differences in line voltage between regions.CompatibilityMini SDC port: parallel charging hub for DJI Mavic 4 Pro;USB-C port: parallel charging hub for DJI Mavic 4 Pro and other devices that support the PD standard;
