Kõik e-poes müügil olevad kaubad pakitakse meie kauplustest. Kui toodet pole kaupluses, pole seda ka e-poes. Üksikute toodete puhul võib juhtuda, et e-poes näitab laoseisu, kuigi poes tegelikult toodet pole. Täname mõistva suhtumise eest. Värvused võivad erineda pildil näidatust. HOIATUS! Ei sobi alla 36-kuu vanustele lastele, sisaldab väikeseid osasid - lämbumise oht.
GEL Wrist Rest Support on LogiLinki hiirepadja kaubamärk. Sellel on geelist randmetugi, mis vähendab väsimust ja pakub mugavust. Padja tagab sujuva hiire juhtimise: palli-, optilise- ja lasertehnoloogia. Sellel on stabiilsuse tagamiseks libisemiskindel põhi. Valmistatud polüuretaanvahust, geelist ja lükrast.
The nickel-plated adapter in the color shiny silver couples two tubes, which do not run on a common straight line and provides at the adapter for a bend of 90 degrees. Two rubber rings seal both sides. The adapter is especially well compatible with the Crystal Link Tubes from Bitspower. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Angle: 90 ° Connections: 2x Ø 12 mm
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 90° 20/40cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Modular Midi-Tower in black, with front and side panels made of tempered glass, side and top made of aluminum, for up to 9 fans, 2x 3.5/2.5 inch and 2x 2.5 inch, 1x USB 3.1 Type C / 2x USB 3.0 Type A. 4 DRIVE CAPACITY ADEQUATE AIRFLOW DUST MANAGEMENT OPTIONAL VERTICAL GPU BACK PANEL MODULAR BACK PANEL MODULAR PUMP STAND ALUMINUM MATERIAL DUAL CHAMBER DESIGN CONFIGURATION OF YOUR CHOICE MODULAR BACK PANELDecide how many expansion slots you need. Calculate the size of your fans & accessories. Pick your motherboard type. 3 kinds of back panels to meet your demand!5 slot 7 slot 3 slot SIDE RADIATOR CONFIGURATION WITH LONG GPU The 30mm space behind the side fan / radiator bracket allows users to mount fans, thus efficiently intake fresh air to directly cool the radiator and leaves enough space to install long GPUs in this compact case. WITH WATER COOLING IN MIND MODULAR PUMP STANDFriendly to custom water cooling users, the three different pump stands included can accommodate different scenarios. FLAT PUMP STAND IDEAL FOR MOUNTING THE PUMP DIRECTY AT THE BOTTOM OF THE CASE. ELEVATED PUMP STAND MOUNTING THE PUMP NEXT TO THE 240/280MM RADIATOR. EASILY MATCH INTERFACE.FLOATING PUMP STAND MOUNTING ABOVE A 120MM FAN ON A RADIATOR. EASILY MATCH INTERFACE. THE POWER BUTTON FINE GROOVES ARE GREAT TO THE TOUCH.A SERIES OF O11 DYNAMIC As a member of the O11 family, the O11D Mini is designed to support a maximum number of radiators to optimize the water-cooling potential, and this even with a smaller frame.O11D MINIDUAL-CHAMBER DESIGN FOR CABLE MANAGEMENT Carried from the design of the O11D series, cables quickly pass to the second chamber through rubber grommets. Multiple tie points and Velcro strap channels are provided to tidy up the cables while the SSD mounting bar helps keep the loose cables all snuggled up to ensure a clean look and prevent the right-side panel from not closing or bulging.SECOND CHAMBER WITH 4 DRIVES CAPACITY SSD Mounting Bar 2 x 2.5” SSD can be positioned at the front or back of the bar.Drive Caddy Optimized storage space for 2 x 3.5” HDD or 2 x 2.5” SSDCOMPLETE DUST PROTECTION All 3 ventilation intake sides are equipped with magnetic dust filters and a removable dust tray to prevent the dust from entering the case.O11D MINI VERTICAL GPU KITSThe vertical GPU enabled back panel can be adjusted up and down for clearance of the fans and radiator at the bottom of the case. DIMENSIONS (D) 420mm × (W) 269.5mm × (H) 380mm MOTHERBOARD E-ATX (Max 280 mm wide) / ATX / Micro-ATX / Mini-ITX PSU SFX / SFX-L MATERIAL Steel4 mm Tempered Glass2 mm Aluminum (top and left panel) FAN SUPPORT Top: 3 × 120mm or 2 × 140mm Side: 2 × 120mm or 2 × 140mm Bottom: 3 × 120mm or 2 × 140mm Rear: 1 × 120mm RADIATOR SUPPORT Top: 360mm or 280mm or 240mm or can’t mount Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE 395mm CPU COOLER HEIGHT CLEARANCE 170mm VGA Length 370mm DRIVES Right side 2 × 2.5" SSD + back plate 2 × 3.5" HDD (or SSD) EXPANSION SLOTS 3 or 5 or 7 slots (depends on back panel) IO PORTS 2 × USB 3.0, 1 × USB 3.1 TYPE-C, 1 × HD Audio, Power Button DUST FILTERS 1 × Top, 1 × Bottom, 2 × Side
Premium Pro Kabel-Set von CableMod, Textil-Sleeving aus ModMesh-Material, für ASUS ROG/Seasonic/PHANTEKS-Netzteile, insgesamt neun Sleeve-Kabel, 50 - 85 cm Länge
Premium Kabel-Set von Corsair (Gen 4), Schwarzes Textil-Sleeving aus Paracord-Material, für Corsair-Netzteile der RMi- / RMx- und HX (Platinum)-Serie, insgesamt vier Sleeve-Kabel, 61 - 75 cm Länge, vorinstallierte Kabelkämme, Kompatibel mit allen Corsair-Netzteilen des Typs 4
The adapter from Bitspower in the colour matt black has an angle of 90 degrees, a G1/4 inch internal thread and a G1/4 inch external thread. Both sides can be rotated 360 degrees and the fluorescent rubber seal on the external thread is particularly chic. Technical Data: Material: Brass Main Color: Matt Black Angle: 90° Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 6 mm
The nickel-plated sealing plugs from Bitspower in matt black can be screwed into a G1/4" internal thread for a certain time or permanently, e.g. to seal radiators or equalizing tanks. The grip of the sealing plug is particularly noble and practical. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Thread: G1/4" Thread Length: 5 mm
