Low-Noise-Pumpe von Alphacool und Laing, Silbernes Messing-Gehäuse (Silver Nickel), möglich, 200 l/h und 2,44 m Förderhöhe bei 10 Watt Leistungsaufnahme, Complete Edition mit Alphacool Eisdecke Aufsatz in Acryl, 5x G1/4-Zoll-Gewinde
All reservoirs of the aqualis series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube of the 450 ml and 880 ml variants has an outer diameter of 75 mm and a wall thickness of 5 mm. Base and top of the aqualis reservoirs are made from Delrin and connected by a stainless steel tube. As a optical highlight, a fountain effect can be realized. If the return line is connected to the center connector of the reservoir, the water flows through the stainless steel tube to the top of the reservoir, where it is ejected through eight nozzles. In combination with illumination, this is a real eye catcher effect. A thin acrylic plate near to the bottom of the reservoir reduces air ingestion to a minimum. Alternatively, the return line can be connected to a lateral connector of the reservoir, the water then exits directly from the base part. For this configuration, a deflector plate is included in delivery to ensure can be installed to effectively remove air from the water circuit. The aqualis PRO 450/880 ml variants additionally feature an acrylic window in the base part and up to six LEDs (5 mm size) can be installed into the base part. The PRO variants can be upgraded with an electronic fill level sensor at a later date. The aqualis XT 450/880 ml variants feature the same acrylic window and LED mounting as the PRO variants. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All variants are also available with nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details: Dimensions without stainless steel bracket: approx. 80 x 80 x 290 mm Filling volume: approx. 880 ml Connection threads: G1/4 Scope of delivery: One Reservoir One stainless steel bracket One stainless steel deflector plate Two sealing screws G1/4 (preinstalled) Monting material Please note: Fittings are not included in delivery, please order seperately.
The airplex radical series combines some key features from the renowned airplex modularity series in a new design, radically reduced to function and performance. The result is a radiator of excellent quality for a competitive price. Just as the airplex modularity series, no welding is performed during production of the airplex radical series, preventing any welding residues inside the radiator. The coolant does not have contact to any other materials than seals, Delrin, copper and stainless steel.For an improved and easier installation process, the airplex radical series comes with threaded inserts made from nickel plated brass that protrude into the mounting holes of the fans. Therefore, fans are "automatically" correctly aligned to the threads - extremely convenient especially with large radiators! Additionally, this results in a deeper thread and the screw can be positioned farther away from the tubes and fins of the radiator, reducing the risk to damage the radiator by using too long screws. If the radiator is to be installed without fans, the inserts can also be installed upside-down resulting in a nearly flat surface, so there is no gap between radiator and PC case.Both sides of the radiator are equipped with slide rails for the threaded inserts and inserts for one side of the radiator are included in delivery. Additional inserts are available separately. Small notches in the slide rails lock the inserts when installed.The radiator frame is made from stainless steel, the rear is chromated in dark gray for optical purposes. The total dimensions of the radiator are extremely compact in relation to the fin dimensions.Technical details:Dimensions: 160 x 140 x 40 mmConnection threads: G 1/4Threaded inserts: M3Connection terminal material: DelrinTube material: CopperFin material: AluminumFrame material: Stainless steelScope of delivery:One radiator4 threaded inserts M34 screws M3 x 25
The nickel-plated temperature sensor in the colour shiny black from Bitspower is an easy way to keep an eye on the water temperature of a water cooling system. To do this, the sensor, which has a sealing ring, is screwed into a G1/4" thread, whereby an internal extension then measures the temperature of the surrounding water. With a 90cm long 2-pin cable, the sensor can be connected to a display or control unit or to a compatible motherboard. This allows, for example, the rotation speed of radiator fans to be automatically controlled depending on the water temperature. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Thread: G1/4" Thread Length: 4 mm Sensor Length: 8 mm 2-Pin Cable: 90 cm
The None Chamfer PETG Link Tube in transparent by Bitspower is made of polyethylene terephthalate, PETG for short. This material is a plastic and is used, for example, for PET bottles. Its strength lies in its high break resistance, easy heatability and high stability. In order to implement them in the system, it is necessary to bend them into shape with heat and cut them to size. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 100cm in length, 12mm on the outside diameter and 10mm on the inside diameter. Only the EML series from Bitspower is compatible as connections. Technical Data: Material: PETG Color: Transparent Outer Diameter: 12 mm Inner Diameter: 10 mm Length: 100 cm Compatibility: EML series Bitspower connectors only
Tootekood: BP-NCCLT12ACBK-L1000GTIN: 4719552224616Jahutid ja lisad
With the Crystal Link Tubes, Waku specialist Bitspower presents a very interesting solution for water enthusiasts who are not completely unskilled in their craft. These are solid tubes of acrylic plastic, which can be cut by the user to the required length and bent with the aid of a heat source suitable. The resulting possible connection of the individual water cooling parts with longer dead straight sections and exactly curved radii is a visually appealing alternative to the traditional connection by means of hoses dar. For example, if you use a hot air gun and the acrylic tube heated with it for some time, the material is so soft that one It can easily bend into the desired radius and holds as long until the acrylic has cooled and the now bent tube hardens again. It does not get any more individual Everything you need can be created here and even adjusted later. Ideally, in addition to a hot air gun and gloves you have a silicone rod (or something similar flexible, but heat-resistant) to hand, which one pushes into the tube in advance, so that the soft tube gets no kink when bending. The transparent-blue Crystal Link Tube offered here has an outer diameter of 12 mm and an inner diameter of 10 mm. The length is 100 cm. It can be used in conjunction with bit-power adapter fittings from the C47, C48 and ML series. Technical details:Material: acrylic glass (PMMA)Colour blueOuter diameter: 12 mmInner diameter: 10 mmLength: 1,000 mmCompatibility: C47 Series Bit Power Fittings and Adapters C48 Bit Power Fittings and Adapters C48 Series Bit Power Fittings and Adapters
Tootekood: BP-NCCLT12ACWH-L1000GTIN: 4719552224609Jahutid ja lisad
Toote kirjeldus inglise keeles:With the Crystal Link Tubes, Waku specialist Bitspower presents a very interesting solution for water enthusiasts who are not completely unskilled in their craft. These are solid tubes of acrylic plastic, which can be cut by the user to the required length and bent with the aid of a heat source suitable. The resulting possible connection of the individual water cooling parts with longer dead straight sections and exactly curved radii is a visually appealing alternative to the traditional connection by means of hoses dar. For example, if you use a hot air gun and the acrylic tube heated with it for some time, the material is so soft that one It can easily bend into the desired radius and holds as long until the acrylic has cooled and the now bent tube hardens again. It does not get any more individual Everything you need can be created here and even adjusted later. Ideally, in addition to a hot air gun and gloves you have a silicone rod (or something similar flexible, but heat-resistant) to hand, which one pushes into the tube in advance, so that the soft tube gets no kink when bending. The transparent-blue Crystal Link Tube offered here has an outer diameter of 12 mm and an inner diameter of 10 mm. The length is 100 cm. It can be used in conjunction with bit-power adapter fittings from the C47, C48 and ML series. Technical details:Material: acrylic glass (PMMA)Colour blueOuter diameter: 12 mmInner diameter: 10 mmLength: 1,000 mmCompatibility: C47 Series Bit Power Fittings and Adapters C48 Bit Power Fittings and Adapters C48 Series Bit Power Fittings and Adapters
Tootekood: BP-NCCLT12AC-L1000GTIN: 4719552222933Jahutid ja lisad
Toote kirjeldus inglise keeles:With the Crystal Link Tubes, Waku specialist Bitspower presents a very interesting solution for water enthusiasts who are not completely unskilled in their craft. These are solid tubes of acrylic plastic, which can be cut by the user to the required length and bent with the aid of a heat source suitable. The resulting possible connection of the individual water cooling parts with longer dead straight sections and exactly curved radii is a visually appealing alternative to the traditional connection by means of hoses dar. For example, if you use a hot air gun and the acrylic tube heated with it for some time, the material is so soft that one It can easily bend into the desired radius and holds as long until the acrylic has cooled and the now bent tube hardens again. It does not get any more individual Everything you need can be created here and even adjusted later. Ideally, in addition to a hot air gun and gloves you have a silicone rod (or something similar flexible, but heat-resistant) to hand, which one pushes into the tube in advance, so that the soft tube gets no kink when bending. The transparent-blue Crystal Link Tube offered here has an outer diameter of 12 mm and an inner diameter of 10 mm. The length is 100 cm. It can be used in conjunction with bit-power adapter fittings from the C47, C48 and ML series. Technical details:Material: acrylic glass (PMMA)Colour blueOuter diameter: 12 mmInner diameter: 10 mmLength: 1,000 mmCompatibility: C47 Series Bit Power Fittings and Adapters C48 Bit Power Fittings and Adapters C48 Series Bit Power Fittings and Adapters
Bracket for vertical mounting of a computer under the desk, It is an ideal solution for optimum use of working space, The height of the computer 300 mm to 533mm, The width of the computer 88 mm to 203 mm, Aesthetic appearance, Made of high quality steel, Stable and robust construction
Print high-quality documents with Original HP Toner Cartridges that were designed for your Samsung printer for worry-free performance. Keep business productivity high and print more with optional high-yield cartridges.
Kompaktes Flex-ATX-Netzteil mit 350 Watt, für SFF-PCs: 29,17 A auf 12 V und 1x PCIe 6-Pin, mit umfangreichen Schutzschaltungen, leiser 40-mm-Lüfter mit optimierter Lüfterkurve, 80 PLUS-Gold-Effizienz mit bis zu 90 % Wirkungsgrad
