Otsing: thermal pad

Play longer, download faster With Steam Deck OLED, we’ve overhauled the internals, making battery life longer and downloads faster. At the same time, we made the device a bit lighter and cooler. More time to play Steam Deck OLED has 30-50% more battery life. We fit a bigger battery into the case, and the OLED display draws less power. Combined with the updated, more efficient AMD APU, you have way more time to play your favorites. Faster downloads Steam Deck OLED comes with Wifi 6E, offering increased bandwidth and lower latency. This means faster downloads (up to 3 times faster!) and stаble online play. Lighter, cooler Thanks to a bigger fan and updated thermals, Steam Deck OLED runs cooler. It also weighs 30g, or ~5% lighter than the LCD model, due to the screen. Updated APU to 6 nm for better efficiency Updated memory to 6400 MT/s, improving latency and power management Increased thermal module thickness and performance Increased active area to 7.4" (from 7.0") Updated refresh rate to 90Hz (from 60Hz) Updated peak brightness to 1000 nits Updated touchscreen polling rate to 180Hz, improved latency and accuracy Updated WiFi / Bluetooth module Added support for WiFi 6E Added support for Bluetooth 5.3, supporting newer codecs such as aptX HD and aptX low-latency Added third antenna near the top of the device for better Bluetooth performance, including when docked Added support for wake from Bluetooth controllers Improved bass response for an overall flatter sound profile Added support for using onboard microphone array simultaneously with the 3.5mm headphones connector Adjusted analog stick top material and shape for increased grip and dust build-up resistance Adjusted analog stick post material to improve interaction feel with front cover and reduce wear Improved reliability of analog stick touch detection Improved responsiveness and tactility of shoulder buttons switch mechanism Adjusted D-pad snap ratio and diagonal interactions Redesigned trackpad for improved fidelity and edge detection Greatly improved trackpad haptics feel and precision Improved battery capacity from 40Wh to 50Wh Improved battery chemistry for faster charging, from 20% to 80% in as little as 45 minutes Changed charging LED to WRGB Added support for waking up from initial unboxing by long-pressing power button instead of requiring AC power Adjusted power supply cable length from 1.5m to 2.5m Added logo to power supply Reduced total system weight to ~640g, or ~5% less than Steam Deck Rear cover screws now thread into metal Adjusted rear cover screw heads to Torx™, as well as other materials and geometry tweaks on the heads to reduce stripping risk Lowered number of screw types throughout system Reduced step count required for common repairs Improved bumper switch mechanism drop reliability Moved bumper switch to joystick board for easier repair Improved display repair/replacement to not require taking rear cover off Greatly improved memory power management firmware Added preliminary support for open-source BIOS and EC firmware Improved resume time by roughly 30%

Lenovo IdeaPad Flex 5 16ABR8 AMD Ryzen 7 7730U (8C / 16T, 2.0 / 4.5GHz, 4MB L2 / 16MB L3) 16GB Soldered LPDDR4x-4266 512GB SSD M.2 2242 PCIe 4.0x4 NVMe Integrated AMD Radeon Graphics Windows 11 Home, EnglishThe smarter choice for versatility. Whatever you're doing or wherever you are, you can count on the smart and 360-degree convertible IdeaPad Flex 5 to seamlessly adapt to you with its tough-tested drop-down hinge which offers more ergonomic typing by lifting up the keyboard, and the latest AMD Ryzen™ 7000 processors and full-function Type-C™ port. Find yourself lost in the story with a taller 16:10 WUXGA (1920x1200) display, and see it from anywhere with minimal eye strain with 300nits brightness and TÜV certification.Why you should buy Lenovo IdeaPad Flex 5 16"1) 360 degrees of durability and freedom Do anything, anywhere with a 360-degree hinge that’s tough-tested 25,000 times for durability as you play, stream and work on any surface, incline or posture. Get a better angle for more ergonomic typing with a drop-down hinge that gently lifts up your keyboard in laptop mode while hiding the bottom bezel. IdeaPad Flex 5’s profile is slim, light, and endlessly versatile.2) Dive deeper into the story Fall deeper into cinematic storytelling through the hyperrealistic imagery and ultra-sharp detail display. Watch your shows anywhere without eye strain with 300 nits brightness and TÜV Low Blue Light certification.3) Flexible smart performance Experiencedeceptively powerful and smart performance and speed for such a thin device with up to AMD Ryzen™ 7000 processors that meet your performance demands where you need them most. For optimal efficiency, Smart Power dynamically adjusts to maximize performance, thermals, acoustics, and battery life in relation to what you're doing.4) Get things done yesterdayAccelerate your creative and work processes with two full-function USB Type-C™ ports for faster data transfers, power delivery, and display output capabilities and WiFi 6 for faster, more stable connectivity. Boost your battery life by three more hours with only 15 minutes of charging through Rapid Charge Boost.

PRO B650-A WIFI - Supports AMD Ryzen™ 9000 / 8000 / 7000 Series Desktop Processors - Supports DDR5 Memory, Dual Channel DDR5 7600+MHz (OC) - Enhanced Power Design: 14+2 DRPS with 80A SPS, dual 8-pin CPU power connectors, Core Boost, Memory Boost - Premium Thermal Solution: Extended Heatsink, MOSFET thermal pads rated for 7W/mK, additional choke thermal pads and M.2 Shield Frozr are built for high performance system and non-stop work - High Quality PCB: 6-layer PCB made with 2oz thickened copper - Lightning Fast experience: PCIe 4.0 slots, Lightning Gen 4 x4 M.2 with M.2 Shield Frozr, USB 3.2 Gen 2x2 - 2.5G LAN with Wi-Fi 6E Solution: Upgraded network solution for professional and multimedia use. Delivers a secure, stable and fast network connection - AUDIO BOOST 5: Reward your ears with studio grade sound quality for the most immersive gaming experience

The high-performance thermal pads of the Thermal Grizzly Minus Pad seriesfeature a very elastic and adaptable surface with extremely high thermal conductivity. Even the smallest component differences can be compensated for very effectively. Available in various sizes and thicknesses.The easy-to-use and flexible Minus Pads are made from a combination of materials: they are based on a ceramic-silicone compound and nano-aluminum oxide. This ensures optimal heat transfer at all times. Only minimal pressure is needed for optimal attachment. All pads are environmentally friendly and RoHS compliant.

Do you love hiking with your dog? Even on frosty winter days? By putting your furry friend in the Hurtta Extreme Overall waterproof suit, you will ensure that low temperatures and moisture are no longer a concern. It has been specially designed for dogs that love to spend active time outdoors. The modern design and very high quality of workmanship meet the demands and expectations of even the most discerning users. The suit perfectly protects the animal from low temperatures, wind, and moisture. Tailored and well-fitted, it does not restrict the dog's movements and provides maximum comfort. It is made from a soft and pleasantly enveloping fabric. A thick layer of padding inside provides protection against the cold. Easy to put on and take off, it fastens with a convenient zipper. The flap at the bottom protects against drafts and moisture. Flexible, adjustable cuffs snugly wrap around the dog's paws, preventing snow from getting inside the sleeves. The high collar and hood protect the neck, head, and ears of the dog from the cold. Adjustments around the collar and in the back length allow for size customization to fit the dog's body structure. Reflective piping and large prints made with 3M technology ensure visibility in difficult weather conditions. An opening in the back allows for the attachment of a harness underneath and the leash. A unique feature of the suit is the use of modern technology in the construction of the lining. It is covered with a special print made from aluminum foil, functioning like a thermal blanket for athletes. The purpose of such a lining is to maintain the dog's body temperature at the correct level and protect against cooling. Thanks to its warming properties for the dog's muscles, the suit can be successfully put on sporting dogs to prepare their bodies for exertion, as well as after, to ensure comfortable rest. The suit is made with attention to every detail: made from soft and pleasant-to-touch waterproof fabric with a lining that maintains body temperature, reflective piping and 3M prints for visibility, with flexible, adjustable snap cuffs, a high collar with a tricot hood for the ears and head, adjustments for collar circumference and back length, a zipper with a windproof cover, an opening for the harness and leash, tear resistance: 10N, waterproof rating: above 10,000mm water column, coverage of the dog: approx. 90% with warm filling of 120–140g/m2, light intensity of reflective elements 400-450 lx/m2, temperature: from -5 to -30°C, quality and durability for years, color: black.. About the brand: Hurtta is a leader among manufacturers of high-quality harnesses, leashes, collars, harnesses, and clothing for active dogs. A well-known and respected company that was established in 2002 in Finland. Its ergonomic and extremely useful training and sports accessories are loved by people all over the world. The original style, modern design, and the unique material Haundtex®, patented by this manufacturer, ensure comfort, convenience, and an impressive appearance for dogs. Products from this brand are characterized by excellent quality, durability, and functionality. Physically active dog owners appreciate the ability to use Hurtta accessories both during walks and while engaging in sports such as running or dog trekking.

Do you love hiking with your dog? Even on frosty winter days? By putting your furry friend in the Hurtta Extreme Overall waterproof suit, you will ensure that low temperatures and moisture are no longer a concern. It has been specially designed for dogs that love to spend active time outdoors. The modern design and very high quality of workmanship meet the demands and expectations of even the most discerning users. The suit perfectly protects the animal from low temperatures, wind, and moisture. Tailored and well-fitted, it does not restrict the dog's movements and provides maximum comfort. It is made from a soft and pleasantly enveloping fabric. A thick layer of padding inside provides protection against the cold. Easy to put on and take off, it fastens with a convenient zipper. The flap at the bottom protects against drafts and moisture. Flexible, adjustable cuffs snugly wrap around the dog's paws, preventing snow from getting inside the sleeves. The high collar and hood protect the neck, head, and ears of the dog from the cold. Adjustments around the collar and in the back length allow for size customization to fit the dog's body structure. Reflective piping and large prints made with 3M technology ensure visibility in difficult weather conditions. An opening in the back allows for the attachment of a harness underneath and the leash. A unique feature of the suit is the use of modern technology in the construction of the lining. It is covered with a special print made from aluminum foil, functioning like a thermal blanket for athletes. The purpose of such a lining is to maintain the dog's body temperature at the correct level and protect against cooling. Thanks to its warming properties for the dog's muscles, the suit can be successfully put on sporting dogs to prepare their bodies for exertion, as well as after, to ensure comfortable rest. The suit is made with attention to every detail: made from soft and pleasant-to-touch waterproof fabric with a lining that maintains body temperature, reflective piping and 3M prints for visibility, with flexible, adjustable snap cuffs, a high collar with a tricot hood for the ears and head, adjustments for collar circumference and back length, a zipper with a windproof cover, an opening for the harness and leash, tear resistance: 10N, waterproof rating: above 10,000mm water column, coverage of the dog: approx. 90% with warm filling of 120–140g/m2, light intensity of reflective elements 400-450 lx/m2, temperature: from -5 to -30°C, quality and durability for years, color: black.. About the brand: Hurtta is a leader among manufacturers of high-quality harnesses, leashes, collars, harnesses, and clothing for active dogs. A well-known and respected company that was established in 2002 in Finland. Its ergonomic and extremely useful training and sports accessories are loved by people all over the world. The original style, modern design, and the unique material Haundtex®, patented by this manufacturer, ensure comfort, convenience, and an impressive appearance for dogs. Products from this brand are characterized by excellent quality, durability, and functionality. Physically active dog owners appreciate the ability to use Hurtta accessories both during walks and while engaging in sports such as running or dog trekking.

Do you love hiking with your dog? Even on frosty winter days? By putting your furry friend in the Hurtta Extreme Overall waterproof suit, you will ensure that low temperatures and moisture are no longer a concern. It has been specially designed for dogs that love to spend active time outdoors. The modern design and very high quality of workmanship meet the demands and expectations of even the most discerning users. The suit perfectly protects the animal from low temperatures, wind, and moisture. Tailored and well-fitted, it does not restrict the dog's movements and provides maximum comfort. It is made from a soft and pleasantly enveloping fabric. A thick layer of padding inside provides protection against the cold. Easy to put on and take off, it fastens with a convenient zipper. The flap at the bottom protects against drafts and moisture. Flexible, adjustable cuffs snugly wrap around the dog's paws, preventing snow from getting inside the sleeves. The high collar and hood protect the neck, head, and ears of the dog from the cold. Adjustments around the collar and in the back length allow for size customization to fit the dog's body structure. Reflective piping and large prints made with 3M technology ensure visibility in difficult weather conditions. An opening in the back allows for the attachment of a harness underneath and the leash. A unique feature of the suit is the use of modern technology in the construction of the lining. It is covered with a special print made from aluminum foil, functioning like a thermal blanket for athletes. The purpose of such a lining is to maintain the dog's body temperature at the correct level and protect against cooling. Thanks to its warming properties for the dog's muscles, the suit can be successfully put on sporting dogs to prepare their bodies for exertion, as well as after, to ensure comfortable rest. The suit is made with attention to every detail: made from soft and pleasant-to-touch waterproof fabric with a lining that maintains body temperature, reflective piping and 3M prints for visibility, with flexible, adjustable snap cuffs, a high collar with a tricot hood for the ears and head, adjustments for collar circumference and back length, a zipper with a windproof cover, an opening for the harness and leash, tear resistance: 10N, waterproof rating: above 10,000mm water column, coverage of the dog: approx. 90% with warm filling of 120–140g/m2, light intensity of reflective elements 400-450 lx/m2, temperature: from -5 to -30°C, quality and durability for years, color: black.. About the brand: Hurtta is a leader among manufacturers of high-quality harnesses, leashes, collars, harnesses, and clothing for active dogs. A well-known and respected company that was established in 2002 in Finland. Its ergonomic and extremely useful training and sports accessories are loved by people all over the world. The original style, modern design, and the unique material Haundtex®, patented by this manufacturer, ensure comfort, convenience, and an impressive appearance for dogs. Products from this brand are characterized by excellent quality, durability, and functionality. Physically active dog owners appreciate the ability to use Hurtta accessories both during walks and while engaging in sports such as running or dog trekking.

Do you love hiking with your dog? Even on frosty winter days? By putting your furry friend in the Hurtta Extreme Overall waterproof suit, you will ensure that low temperatures and moisture are no longer a concern. It has been specially designed for dogs that love to spend active time outdoors. The modern design and very high quality of workmanship meet the demands and expectations of even the most discerning users. The suit perfectly protects the animal from low temperatures, wind, and moisture. Tailored and well-fitted, it does not restrict the dog's movements and provides maximum comfort. It is made from a soft and pleasantly enveloping fabric. A thick layer of padding inside provides protection against the cold. Easy to put on and take off, it fastens with a convenient zipper. The flap at the bottom protects against drafts and moisture. Flexible, adjustable cuffs snugly wrap around the dog's paws, preventing snow from getting inside the sleeves. The high collar and hood protect the neck, head, and ears of the dog from the cold. Adjustments around the collar and in the back length allow for size customization to fit the dog's body structure. Reflective piping and large prints made with 3M technology ensure visibility in difficult weather conditions. An opening in the back allows for the attachment of a harness underneath and the leash. A unique feature of the suit is the use of modern technology in the construction of the lining. It is covered with a special print made from aluminum foil, functioning like a thermal blanket for athletes. The purpose of such a lining is to maintain the dog's body temperature at the correct level and protect against cooling. Thanks to its warming properties for the dog's muscles, the suit can be successfully put on sporting dogs to prepare their bodies for exertion, as well as after, to ensure comfortable rest. The suit is made with attention to every detail: made from soft and pleasant-to-touch waterproof fabric with a lining that maintains body temperature, reflective piping and 3M prints for visibility, with flexible, adjustable snap cuffs, a high collar with a tricot hood for the ears and head, adjustments for collar circumference and back length, a zipper with a windproof cover, an opening for the harness and leash, tear resistance: 10N, waterproof rating: above 10,000mm water column, coverage of the dog: approx. 90% with warm filling of 120–140g/m2, light intensity of reflective elements 400-450 lx/m2, temperature: from -5 to -30°C, quality and durability for years, color: black.. About the brand: Hurtta is a leader among manufacturers of high-quality harnesses, leashes, collars, harnesses, and clothing for active dogs. A well-known and respected company that was established in 2002 in Finland. Its ergonomic and extremely useful training and sports accessories are loved by people all over the world. The original style, modern design, and the unique material Haundtex®, patented by this manufacturer, ensure comfort, convenience, and an impressive appearance for dogs. Products from this brand are characterized by excellent quality, durability, and functionality. Physically active dog owners appreciate the ability to use Hurtta accessories both during walks and while engaging in sports such as running or dog trekking.

GG-AT 90DW Desktop Barcode Printer Printing Method: Direct Thermal Resolution: 203DPI Printing Speed: Max 127MM/S Printing Width: Max 108MM Interface: USB2.0， WiFi, Bluetooth, serial interface, network interface Editing Mode: Computer Editing Consumable Type: Label/Receipt Paper/Wristband Consumable Width: 25.4-118MM Max.roll Capacity: 127MM OD Application: Retail, Warehouse Management, Logistics and Express, Office, Medical, Daily Life etc Dimensions: About 240*211*173MM Weight: 1.67KG Continuous paper, fixed length paper with or without black line, folder paper, receipt paper, wristband label tape, DYMO LW/NINESTAR/ZEBRA label roll Continuous paper, fixed length paper with or without black line, folder paper, receipt paper, wristband label tape, DYMO LW/NINESTAR/ZEBRA label roll

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical dataDimensions (L x W x H)100 x 100 x 1,5mmThermal conductivity7W/mKColorpink

These thermal pads are very useful to compensate height differences and other irregularities on coolers and surfaces that are to be cooled. Due to the very elastic adaptability and the low hardness of this pad only little contact pressure is needed to allow perfect adaptation to the surfaces to ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible irregularities. The self-adhesive surface of these pads allow easy installation and prevents the pad from shifting during installation of the cooler. These pads can be cut to any desired size and are therefore suitable for just about any application: From VRAM coolers on graphics cards to VRM blocks on the motherboard. Even large components such as the North- or Southbridge can be equipped with these pads, as they have excellent heat conductivity. With their many uses, these thermal pads should be amongst any PC-builder's equipment. Technical data: Dimensions: 15x15x5mm Heat conductivity: 1,5 W/mK Maximum bridgeable gap: 5mm Electrically non-conductive Extent of delivery: 1x thermal pad 15x15x5mm (1 piece) Note: The thermal pads can be compressed to up to half of their height.>

These thermal pads are very useful to compensate height differences and other irregularities on coolers and surfaces that are to be cooled. Due to the very elastic adaptability and the low hardness of this pad only little contact pressure is needed to allow perfect adaptation to the surfaces to ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible irregularities. The self-adhesive surface of these pads allow easy installation and prevents the pad from shifting during installation of the cooler. These pads can be cut to any desired size and are therefore suitable for just about any application: From VRAM coolers on graphics cards to VRM blocks on the motherboard. Even large components such as the North- or Southbridge can be equipped with these pads, as they have excellent heat conductivity. With their many uses, these thermal pads should be amongst any PC-builder's equipment. Technical data: Dimensions: 30x30x5mm Heat conductivity: 1,5 W/mK Maximum bridgeable gap: 1mm Electrically non-conductive Extent of delivery: 1x thermal pad 30x30x5mm (1 piece) Note: The thermal pads can be compressed to up to half of their height.>

These thermal pads are perfect for compensating height differences and irregularities on coolers and surfaces to be cooled. Their highly elastic and low-hardness design requires minimal contact pressure, ensuring optimal surface adaptation and effective heat transfer. The self-adhesive backing allows for easy installation and prevents shifting during cooler placement, while the pads can be cut to any desired size for versatile use on VRAM coolers, VRM blocks, or even larger components like Northbridge and Southbridge chips. With dimensions of 30x30x0.5mm and a thermal conductivity of 1.5 W/mK, these pads bridge up to 0.5mm gaps and are electrically non-conductive. Scope of delivery: 1x thermal pad 30x30x0.5mm (1 piece) Note: These pads can be compressed to up to half of their height.

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details:Colour: GreyDimensions: 30x30x3mmThermal conductivity: 5 W/mkmaximum bridgeable gap: 3 mmelectrically non-conductive Extent of delivery: 1x Thermal pad 30x30x3mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal padsThis product has been reviewed for you:Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details:Colour: GreyDimensions: 15x15x3mmThermal conductivity: 5 W/mkmaximum bridgeable gap: 3 mmelectrically non-conductive Extent of delivery: 1x Thermal pad 15x15x3mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal padsThis product has been reviewed for you:Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details:Colour: GreyDimensions: 15x15x1,5mmThermal conductivity: 5 W/mkmaximum bridgeable gap: 1,5 mmelectrically non-conductive Extent of delivery: 1x Thermal pad Ultra 5W/mk 15x15x1,5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal padsThis product has been reviewed for you:Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details:Colour: GreyDimensions: 30x30x1,5mmThermal conductivity: 5 W/mkmaximum bridgeable gap: 1,5 mmelectrically non-conductive Extent of delivery: 1x Thermal pad Ultra 5W/mk 30x30x1,5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal padsThis product has been reviewed for you:Freeocen

These self-adhesive thermal pads are very useful to compensate height differences and other irregularities on coolers and surfaces that are to be cooled. Due to the very elastic adaptability and the low hardness of this pad only little contact pressure is needed to allow perfect adaptation to the surfaces to ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible irregularities. The self-adhesive surface of these pads allow easy installation and prevents the pad from shifting during installation of the cooler. These pads were specially produced for RAM cooling but can also be cut to any desired size. Technical data: Dimensions: 120x20x0,5mm Heat conductivity: 1,5 W/mK Maximum bridgeable gap: 0,5mm Electrically non-conductive Extent of delivery: 1x Self-adhesive thermal pad 0,5mm (120x20mm) for ramplex, Mips and Koolance Note: The thermal pads can be compressed to up to half of their height.>

This thermal padd is very useful to compensate height differences and other irregularities on coolers and surfaces that are to be cooled. Due to the very elastic adaptability and the low hardness of this pad only little contact pressure is needed to allow perfect adaptation to the surfaces to ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible irregularities. The self-adhesive surface of these pads allow easy installation and prevents the pad from shifting during installation of the cooler. These pads were specially produced for RAM cooling but can also be cut to any desired size. Technical data: Dimensions: 120x20x1,5mm Heat conductivity: 1,5 W/mK Maximum bridgeable gap: 1,5mm Electrically non-conductive Extent of delivery: 1x Self-adhesive thermal pad 1,5mm (120x20mm) for ramplex, innovatek, Mips and Koolance Note: The thermal pads can be compressed to up to half of their height.

All new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is equipped with a protective foil which needs to be removed before use. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical specifications: Colour: White Dimensions: 120x20x0,5mm Thermal conductivity: 7 W/mk maximum bridgeable gap: 0,5 mm electrically non-conductive Extent of delivery: 1x Phobya thermal pad XT 7W/mK 0.5mm (120x20mm) for ramplex, innovatek, Mips, Koolance Data sheet to the thermal pads This product has been reviewed for you (by):Script-BaseFreeocen

All new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is equipped with a protective foil which needs to be removed before use. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical specifications: Colour: White Dimensions: 120x20x0,5mm Thermal conductivity: 7 W/mk maximum bridgeable gap: 1 mm electrically non-conductive Extent of delivery: 1x Phobya thermal pad XT 7W/mK 1mm (120x20mm) for ramplex, innovatek, Mips, Koolance Data sheet to the thermal pads This product has been reviewed for you (by): Script-Base Freeocen

All new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is equipped with a protective foil which needs to be removed before use. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical specifications: Colour: White Dimensions: 120x20x0,5mm Thermal conductivity: 7 W/mk maximum bridgeable gap: 1,5 mm electrically non-conductive Extent of delivery: 1x Phobya thermal pad XT 7W/mK 1.5mm (120x20mm) for ramplex, innovatek, Mips, Koolance Data sheet to the thermal pads This product has been reviewed for you (by): Script-Base Freeocen

This special pad prevents damages and chipping or shorts and fits on all Chips without a protective frame with an open Core. The special feature of this pad is that it additionally features great thermal conductivity unlike other protective pads. Advantages: Open Cores are protected Mounting of coolers/ waterblocks is made easier and safer Electrical non-conductivity prevents shorts Thermal conductivity optimizes cooling of the Chip Technical specifications: Thickness: 1mm Outer dimensions: 35x35mm Inner cut-out: 15x15mm Please not that the protective pads installed on Mainboards may have different thicknesses. If the thickness may deviate by more than 0,5mm it may result in damages to the hardware during installation.

Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications:Material: PolymersColour: WhiteDimensions (L x W x H):15x15x0,5mmThermal conductivity: Up to 1W/mkAdhesive strength: min: 16N/25mm electrically non-conductiveconforms with ROHS Extent of delivery:1x Alphacool double-sided thermal adhesive pad 15x15x0,5mm

Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications:Material: PolymersColour: WhiteDimensions (L x W x H):30x30x0,5mmThermal conductivity: Up to 1W/mkAdhesive strength: min: 16N/25mm electrically non-conductiveconforms with ROHS Extent of delivery:1x Alphacool double-sided thermal adhesive pad 30x30x0,5mm

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 1.5mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 3mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 30 x 30 x 3mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:4x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 2mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool's ultimate solution for cooling your computer with a layer of ice. Not a layer of ice in the traditional sense made of frozen water, but a layer that will freeze any chip. The properties of the new thermal pads speak for themselves.With up to 17 W/mk, the pads outperform all previous thermal pads and pastes! All hardware components can now be installed easily and cleanly using thermal pads!The "Alphacool ice layer" offers all the advantages and typical properties of a thermal pad: self-adhesive, elastic, adaptable and much more! The area of application is just as versatile, whether for RAM and mainboard coolers or graphics card and CPU coolers, wherever the circuit board meets the heat sink, the Alphacool ice layer is a good choice.The pads are available in different power levels, 11, 14 and 17W/mk, each available in 0.5mm, 1mm and 1.5mm thickness to perfectly compensate for height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers). These can be easily separated with scissors to individually adjust the right size for each component. Technical dataDimensions (L x W x H)100 x 100 x 1,5mmThermal conductivity17W/mKThickness1,5mmFlame retardantV-0 (UL94)Useful temperature-40 ~ +150 °CHardness72 (Shore OO)Specific gravity3.2Breakdown voltage10 kV/mmElongation40 %Tensile strength0.5 MPaVolume resistivity1.0x10^11 Ohm-mFasteningslightly adhesiveColorgrey

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

The Eisschicht from Alphacool can, like other thermal pads, compensate for the irregularities of heat sinks and the elements to be cooled. But it has a great feature: The Eisschicht consists of thermal paste with an embedded mesh! This ensures that the performance of these pads is much more efficient than normal thermal pads, regardless of the low W/mK value. In addition, a better distribution and filling between the surfaces is achieved. This also results in better air displacement. Due to their soft consistency, there is also no pressure on components or solder joints. Nvidia also uses this kind of pads for the Founders Edition. The Eisschicht can be easily cut to the desired size and attached to heat sinks without slipping.As a basic component or spare part, thermal pads belong in every well-organized computer tinkering corner! Technical dataDimensions (L x W x H)100 x 100 x 0,5mmThermal conductivity3 W/mKElectrical ConductiveNoColorwhite

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)100 x 100 x 1mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight40 gColorGrey

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)50 x 50 x 3mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight28 gColorGrey

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)50 x 50 x 2mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight19 gColorGrey

The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 120 x 20 x 1 mm Colour Grey Specific Gravitiy ASTM D792 3,4 g/cc Thermal Conductivity ASTM D5470 11.0 W/mK Hardness ASTM 2240 72 Shore OO Useful Temperature -40 to +150 °C Volume Resistivity ASTM D257 1.0x1011 Ohm-m Dielectric Constant ASTM D150 7,2 MHz Dielectric Breakdown Voltage ASTM D149 14 kV/mm Flame Rating UL 94 V-0 Weight 20 g Download Datasheet PDF: Alphacool Apex Soft Thermal Pad 11W/mk 2x 120x20x1mm

The Eisschicht Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. These Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Ultra Soft thermal pads acts similar to a thermal paste. While normal thermal pads are only pressed together by the contact pressure there can be areas that are uneven due to different high components, making them less effective. With the ultra soft Eisschicht this problem doesn’t exist because the material distributes itself similar to thermal paste and thus prevents the highest components from being subjected to increased contact pressure by the cooler. As standard thermal pads are quite stiff they can also cause too much pressure on components. In the worst cases, this can cause the PCB to bend and even break. Due to the soft consistency of the Ultra Soft Eisschicht any excess material can spread out rather than cause problems. The Ultra Soft Eisschicht is not only performance orientated, but also safer!But this is not the only advantage!Moreover, the special material cannot dry out. Usually the silicone in thermal pads bleeds out over time. This makes them hard and the performance of the pads drops rapidly from a certain point. This is not the case with the Ultra Soft Eisschicht. They can be used over a much longer period of time without significantly losing performance.A thermal pad with fabric?The consistency of the heat conducting material is similar to a viscous heat conducting paste. A special fabric is embedded so that the material remains stable and can be used as a thermal pad. This ensures a perfect distribution of the material if the element to be cooled has an uneven shape. Examples include voltage transformers, VRam and similar electronic components of all kinds that require cooling.Cutting? No problem!To cut the thermal pads to size, you should definitely leave the foil on the pads. So the pads can easily be cut to size with a pair of scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. Technical dataL x W x H100 x 100 x 1,5mmSpecific Gravitiy ASTM D2972,65 g/ccThermal Conductivity ASTM D54703.0 W/mKHardness ASTM 224020 Shore 00Working temperature40 to 200°COutgassing ASTM E5950,40% TMLVolume Resistivity ASTM D2576.2X10 high 13 Ohm-meterDielectric Constant ASTM D1505,5 MHzDielectric Breakdown Voltage ASTM D149>5000 VACFlame Rating UL E33110094 V0Colorwhite

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey