Otsing: P20 pro

ATX power supply RAPTOR 500W, BRONZE 80+, Single Rail, DC-DC RAPTOR 500W BRONZE 80+, DC-DC, Single Rail Premium ATX power supply Huge power reserve Thanks to the advanced design and the highest quality components, Raptor power supplies have a huge power reserve. In the RAPTOR 500W power supply, 500W is available on the +12V line alone (dedicated to powering the processor and graphics card, among other things), in addition to a total of 100W on the +3.3V and + 5V lines and 13.6W on the remaining lines. So the maximum power significantly (approx. 613W) exceeds the rated power of 500W. Efficiency above 85% High efficiency - over 85% at a load of 50% power, over 82% at a load of 20% and 100% power. This means less heat production and more efficient cooling, which translates into quiet operation. High efficiency reduces energy consumption, which in turn reduces equipment operating costs. Active PFC High-quality power supplies use active PFC, which is more effective than the passive PFC used in standard power supplies. Active PFC systems are specialized electronic circuits that adapt to the load and to the conditions in the electrical network, and are therefore able to correct the phase shift efficiently regardless of the operating conditions of the power supply. DC-DC Architecture Power supplies with "DC / DC" technology convert +12V DC in the main transformer and then use it as a basis for +3.3V and +5V - unlike conventional models, which generate all currents simultaneously. Only two additional converters reduce the voltage from +12V to +5V and +3.3V. This increases the efficiency of the entire power supply and also creates a strong +12V line, which is directly used by the most important components such as the processor and graphics card. In addition, it increases the stabilization of individual voltages and reduces to a minimum the impact of current spikes of a given voltage on other voltages. High-quality capacitors A high-quality main capacitor 105`C / 270° uF (in the RAPTOR 500 model) improves the durability of the power supplies and ensures the stability and reliability of the RAPTOR series of power supplies. In the converters reducing the voltage from +12V to +5V and +3.3V, polymer capacitors are used, which are characterized by very low losses. Single +12V RAIL The design with a single +12V rail ensures stable output current at high load and, above all, more optimal power distribution for individual computer components. This is especially important for units with efficient processors and graphics cards. Power cable included All REBELTEC power supplies are sold with a mains power cable, so you don't have to buy it separately - you save time and money. Non-modular design with FLAT BLACK flat cables The RAPTOR series is supplied with soft black FLAT BLACK cables, which allow for easy cable installation and ensure optimal voltage in the system and also cause. that the cables can be arranged more easily and are less visible, which is important in transparent housings. SPECIFICATION: The power supply meets the requirements of 80PLUS BRONZE standards Stable continuous power of 500W - maximum power on the 12V line is as much as 500W, combined on the 5V & 3.3V lines is 100W active PFC (>0.9) DC-DC architecture - ensures high voltage stabilization SINGLE RAIL 12V - optimal power distribution for key components efficiency >82% at 20% load efficiency >85% at 50% load efficiency >82% at 100% load ERP2013 compliance 12cm fan (ultra silent) thermally controlled operating speed black housing FLAT BLACK cables, thanks to which they are easy to arrange in the housing and remain invisible with transparent housings MTBF >100 000h w complete with 16A/250V cable 1.2m 3x0.75mm2 Size: 150 x 140 x 86 mm Weight: 1305g EAN code: 5902539602258 Secondary side wiring: 3x Molex connector (on 3 cables 60-75cm long, flat black, shared with SATA) 5x SATA connector (on 3 cables 45-60cm long, flat black) 1x CPU 12V 4+4pin connector (55cm long cable, flat black) 2x PCI-E 6+2pin connector (50+15cm long cable, flat black) 1x ATX 20+4pin pin connector (50cm long cable, flat black) Protections: OVP - protection overvoltage SCP - short circuit protection OPP - overload protection SIP - surge current protection UVP - undervoltage protection OTP - overheating protection

ATX power supply RAPTOR 600W, BRONZE 80+, Single Rail, DC-DC RAPTOR 600W BRONZE 80+, DC-DC, Single Rail Premium ATX power supply Huge power reserve Thanks to the advanced design and the highest quality components, Raptor power supplies have a huge power reserve. In the RAPTOR 600W power supply, 600W is available on the +12V line alone (dedicated to powering the processor and graphics card, among other things), in addition to a total of 105W on the +3.3V and + 5V lines and 16.1W on the remaining lines. So the maximum power significantly (approx. 721W) exceeds the rated power of 600W. Efficiency above 85% High efficiency - over 85% at a load of 50% power, over 82% at a load of 20% and 100% power. This means less heat production and more efficient cooling, which translates into quiet operation. High efficiency reduces energy consumption, which in turn reduces equipment operating costs. Active PFC High-quality power supplies use active PFC, which is more effective than the passive PFC used in standard power supplies. Active PFC systems are specialized electronic circuits that adapt to the load and to the conditions in the electrical network, and are therefore able to correct the phase shift efficiently regardless of the operating conditions of the power supply. DC-DC Architecture Power supplies with "DC / DC" technology convert +12V DC in the main transformer and then use it as a basis for +3.3V and +5V - unlike conventional models, which generate all currents simultaneously. Only two additional converters reduce the voltage from +12V to +5V and +3.3V. This increases the efficiency of the entire power supply and also creates a strong +12V line, which is directly used by the most important components such as the processor and graphics card. In addition, it increases the stabilization of individual voltages and reduces to a minimum the impact of current spikes of a given voltage on other voltages. High-quality capacitors A high-quality main capacitor 105`C / 330° uF (in the RAPTOR 600 model) improves the durability of the power supplies and ensures the stability and reliability of the RAPTOR series of power supplies. In the converters reducing the voltage from +12V to +5V and +3.3V, polymer capacitors are used, which are characterized by very low losses. Single +12V RAIL The design with a single +12V rail ensures stable output current at high load and, above all, more optimal power distribution for individual computer components. This is especially important for units with efficient processors and graphics cards. Power cable included All REBELTEC power supplies are sold with a mains power cable, so you don't have to buy it separately - you save time and money. Non-modular design with FLAT BLACK flat cables The RAPTOR series is supplied with soft black FLAT BLACK cables, which allow for easy cable installation and ensure optimal voltage in the system and also cause. that the cables can be arranged more easily and are less visible, which is important in transparent housings. SPECIFICATION: The power supply meets the requirements of 80PLUS BRONZE standards Stable continuous power of 600W - maximum power on the 12V line is as much as 600W, combined on the 5V & 3.3V lines is 105W active PFC (>0.9) DC-DC architecture - ensures high voltage stabilization SINGLE RAIL 12V - optimal power distribution for key components efficiency >82% at 20% load efficiency >85% at 50% load efficiency >82% at 100% load ERP2013 compliance 12cm fan (ultra silent) thermally controlled operating speed black housing FLAT BLACK cables, thanks to which they are easy to arrange in the housing and remain invisible with transparent housings MTBF >100 000h w complete with 16A/250V cable 1.2m 3x0.75mm2 Size: 150 x 140 x 86 mm Weight: 1330g EAN code: 5902539602265 Secondary side wiring: 3x Molex connector (on 3 cables 60-75cm long, flat black, shared with SATA) 5x SATA connector (on 3 cables 45-60cm long, flat black) 1x CPU 12V 4+4pin connector (55cm long cable, flat black) 2x PCI-E 6+2pin connector (50+15cm long cable, flat black) 1x ATX 20+4pin pin connector (50cm long cable, flat black) Protections: OVP - protection overvoltage SCP - short circuit protection OPP - overload protection SIP - surge current protection UVP - undervoltage protection OTP - overheating protection

ATX power supply RAPTOR 700W, BRONZE 80+, Single Rail, DC-DC RAPTOR 700W BRONZE 80+, DC-DC, Single Rail Premium ATX power supply Huge power reserve Thanks to the advanced design and the highest quality components, Raptor power supplies have a huge power reserve. In the RAPTOR 700W power supply, 700W is available on the +12V line alone (dedicated to powering the processor and graphics card, among other things), in addition to a total of 105W on the +3.3V and + 5V lines and 16.1W on the remaining lines. So the maximum power significantly (approx. 821W) exceeds the rated power of 700W. Efficiency above 85% High efficiency - over 85% at a load of 50% power, over 82% at a load of 20% and 100% power. This means less heat production and more efficient cooling, which translates into quiet operation. High efficiency reduces energy consumption, which in turn reduces equipment operating costs. Active PFC High-quality power supplies use active PFC, which is more effective than the passive PFC used in standard power supplies. Active PFC systems are specialized electronic circuits that adapt to the load and to the conditions in the electrical network, and are therefore able to correct the phase shift efficiently regardless of the operating conditions of the power supply. DC-DC Architecture Power supplies with "DC / DC" technology convert +12V DC in the main transformer and then use it as a basis for +3.3V and +5V - unlike conventional models, which generate all currents simultaneously. Only two additional converters reduce the voltage from +12V to +5V and +3.3V. This increases the efficiency of the entire power supply and also creates a strong +12V line, which is directly used by the most important components such as the processor and graphics card. In addition, it increases the stabilization of individual voltages and reduces to a minimum the impact of current spikes of a given voltage on other voltages. High-quality capacitors A high-quality main capacitor 105`C / 390° uF (in the RAPTOR 700 model) improves the durability of the power supplies and ensures the stability and reliability of the RAPTOR series of power supplies. In the converters reducing the voltage from +12V to +5V and +3.3V, polymer capacitors are used, which are characterized by very low losses. Single +12V RAIL The design with a single +12V rail ensures stable output current at high load and, above all, more optimal power distribution for individual computer components. This is especially important for units with efficient processors and graphics cards. Power cable included All REBELTEC power supplies are sold with a mains power cable, so you don't have to buy it separately - you save time and money. Non-modular design with FLAT BLACK flat cables The RAPTOR series is supplied with soft black FLAT BLACK cables, which allow for easy cable installation and ensure optimal voltage in the system and also cause. that the cables can be arranged more easily and are less visible, which is important in transparent housings. SPECIFICATION: The power supply meets the requirements of 80PLUS BRONZE standards Stable continuous power of 700W - maximum power on the 12V line is as much as 700W, combined on the 5V & 3.3V lines is 105W active PFC (>0.9) DC-DC architecture - ensures high voltage stabilization SINGLE RAIL 12V - optimal power distribution for key components efficiency >82% at 20% load efficiency >85% at 50% load efficiency >82% at 100% load ERP2013 compliance 12cm fan (ultra silent) thermally controlled operating speed black housing FLAT BLACK cables, thanks to which they are easy to arrange in the housing and remain invisible with transparent housings MTBF >100 000h w complete with 16A/250V cable 1.2m 3x0.75mm2 Size: 150 x 140 x 86 mm Weight: 1375g EAN code: 5902539602272 Secondary side wiring: 3x Molex connector (on 3 cables 80cm long, flat black, shared with SATA) 6x SATA connector (on 3 cables 50-65cm long, flat black) 1x CPU 12V 4+4pin connector (55cm long cable, flat black) 2x PCI-E 6+2pin connector (50+15cm long cable, flat black) 1x ATX 20+4pin pin connector (50cm long cable, flat black) Protections: OVP - protection overvoltage SCP - short circuit protection OPP - overload protection SIP - surge current protection UVP - undervoltage protection OTP - overheating protection

Epson UltraChrome PRO inks utilize the first four-level gray ink technology to produce outstanding grayscale prints. New Yellow pigment formulation for up to twice the overall print permanence and longevity when compared with previous generation ink set. Individual ink cartridges up to 700 ml enable users to avoid production downtimes and maximize profitability. The SureColor P20000 is designed exclusively for use with Epson ink cartridges.1OriginalJahBrändiühilduvusEpsonPrintimisvärvidHallÜhilduvusSureColor P20000Värvilise trüki kassettide hulk1Värvilise tindi hulk700 ml

This mini PC is designed to be portable, weighing only 690g, and can be easily set up as a desktop or entertainment hub. It's perfect for professionals, students, and home users who need a compact yet capable machine​Processor: Powered by the 12th generation Intel Core i5-12450H processor, it offers 6 cores and 12 threads, with a turbo frequency of up to 4.5 GHz, making it suitable for multitasking, office work, and even light gaming.Memory: The MP200 comes with 16GB of DDR4 RAM, which can be expanded up to 128GB, ensuring smooth performance even when handling demanding tasks.Storage: It includes a 1TB M.2 SSD, providing fast storage access, and supports expansion with a 2.5" HDD up to 2TB.Graphics: Integrated Intel UHD Graphics allows for 4K Ultra HD output, making it great for media consumption and multi-monitor setups.Connectivity: Equipped with Wi-Fi 6 and Bluetooth 5.2 for fast and stable wireless connections, as well as multiple ports (USB 3.2, HDMI, DisplayPort, and Type-C) for easy device connectivity.Cooling and Noise: A powerful cooling system keeps the device cool during heavy use, while maintaining quiet operation with noise levels under 39dB, ensuring a peaceful work environment.Operating System: Pre-installed with Windows 11 Pro, this mini PC is optimized for productivity and offers advanced features for business and security.

The C+Series is a power supply series with the ATX standard 2.52 and black ribbon cables. The power supplies are designed for office and home computers, but can also be installed in PCs that are occasionally used for gaming. The black design of the power supplies and the elegant flat ribbon cables blend visually into any PC build. The power supplies deliver stable voltages with high efficiency (80+ Standard) to meet the ErP2014 standard. The integrated black 120mm fan provides silent cooling. Four integrated safety circuits ensure safe operation at all times.

Lanberg FF01-8027-12BL single section standing cabinet is a solution intended for network construction, mounting of cables and equipment in size 19 with a maximum total load capacity of 800 kg. It may be used in data centres which require a large amount of space in equipment cabinets. The cabinet will successfully fulfil its role in large, extensive networks and server rooms, both in small, medium and large companies and corporations. It will also prove useful in low-current installations such as cable TV networks, alarm systems, fire protection, access control and CCTV and IP monitoring systems. The structure is made using high quality rolled steel and is characterised by excellent design and workmanship. The cabinet allows full depth adjustment of the vertical mounting rails. It is equipped with a front door made of tempered glass with a lock, with the possibility of right or left assembly. It has removable side panels (with locks included) and a solid steel rear door with lock. It is possible to run cabling through the lockable top and bottom panels (with plugs supplied). The cabinet has a LCD display mounted on the front, which displays basic information (e.g. temperature inside the cabinet, current time and the current status of the fans) about the operating status of the device. The set includes a ventilation panel with 4 fans 230V. In addition, accessories for fixing the support rails, M6 screws and input panel plugs are included, and thanks to the self-assembly design (flat pack), the whole unit comes in 4 flat packs for easy transportation. Features: Cabinet type: standing, Colour: Black RAL9004, Height: 27U, Dimensions of the cabinet (H x W x D): 800x1000x1431 mm, Height (top panel - bottom panel): 1352 mm, Height (upper panel - base): 1425 mm, Height (upper panel - ground including screws): 1431 mm, LCD display: Yes, Floor panel: 4 castors with brake + adjustable feet, Internal spacing width between the rack rails: 450 mm, Spacing width between rack rail openings: 465 mm, External width between the rack rails: 500 mm, Load capacity: Up to 800 KG, Protection class: IP20, Ventilation panel: Including 4 fans 230V in the upper housing, Door type: Front - hardened glass, Rear - steel Compliance with standards: ANSI/EIA RS-310D, IEC297-2, DIN41494; PART1 & PART7, ETSI, Material of construction: High quality rolled steel, powder coated, Door thickness: 5.0 mm, Sheet thickness: vertical mounting rails - 2.00 mm; mounting profile - 2.00 mm; rest - 1.50 mm - 1.20 mm, Cable openings: Top, Bottom (adjustable), Included: Mounting accessories, front and rear door lock, two side panel locks, 20 M6 screws, 2 vertical cable organisers x2.

Dreame P2032-7S1P-BWB

Wall mount, single section Lanberg cabinet WF01-6406-00S is a solution designed to expand networks, installation of cabling and equipment in size 19" with max. 60kg loading capacity. It can be used in networks, server rooms, small and medium businesses. It can also work in low voltage systems such as cable television networks, alarm systems, fire protection systems and access control systems, CCTV and IP surveillance. Appropriate design allows simple self-assembly. Cabinet is characterized by IP20 degree of protection, opening front door with possibility of rotating to 180° with lock, removable side panels (locks included). The cabinet has cable entry panel on top and bottom cover. This product is made of high-grade cold rolled steel.

Lanberg FF01-8037-12BL single section standing cabinet is a solution intended for network construction, mounting of cables and equipment in size 19 with a maximum total load capacity of 800 kg. It may be used in data centres which require a large amount of space in equipment cabinets. The cabinet will successfully fulfil its role in large, extensive networks and server rooms, both in small, medium and large companies and corporations. It will also prove useful in low-current installations such as cable TV networks, alarm systems, fire protection, access control and CCTV and IP monitoring systems. The structure is made using high quality rolled steel and is characterised by excellent design and workmanship. The cabinet allows full depth adjustment of the vertical mounting rails. It is equipped with a front glass door with a lock, with the possibility of right or left assembly. It has removable side panels (with locks included) and a rear metal door with lock. It is possible to run cabling through the lockable top and bottom panels (with plugs supplied). The cabinet has a LCD display mounted on the front, which displays basic information (e.g. temperature inside the cabinet, current time and the current status of fans) about the operating status of the device. The set includes a ventilation panel with 4 fans 230V. In addition, accessories for fixing the support rails, M6 screws and input panel plugs are included, and thanks to the self-assembly design (flat pack), the whole unit comes in 4 flat packs for easy transportation. Features: Cabinet type: standing, Colour: Black RAL9004, Height: 37U, Dimensions of the enclosure (H x W x D): 800x1000x1876 mm, Height (top panel - bottom panel): 1797 mm, Height (upper panel - base): 1870 mm, Height (upper panel - ground including screws): 1876mm, LCD display: Yes Floor panel: 4 castors with brake + adjustable feet, Internal spacing width between the rack rails: 450mm, Spacing width between rack rail openings: 465 mm, External width between the rack rails: 500 mm, Load capacity: Up to 800 KG, Protection class: IP20, Ventilation panel: Including 4 fans 230V in the upper housing, Door type: Front - hardened glass, Rear - steel Compliance with standards: ANSI/EIA RS-310D, IEC297-2, DIN41494; PART1 & PART7, ETSI, Material of construction: High quality rolled steel, powder coated, Door thickness: 5.0 mm, Sheet thickness: vertical mounting rails - 2.00 mm; mounting profile - 2.00 mm; rest - 1.50 mm - 1.20 mm, Cable openings: Top, Bottom (adjustable), Included: Mounting accessories, front and rear door lock, two side panel locks, 20 M6 screws, 2 vertical cable organisers x2.

Wall mount, single section Lanberg cabinet WF01-6609-00S is a solution designed to expand networks, installation of cabling and equipment in size 19" with max. 60kg loading capacity. It can be used in networks, server rooms, small and medium businesses. It can also work in low voltage systems such as cable television networks, alarm systems, fire protection systems and access control systems, CCTV and IP surveillance. Appropriate design allows simple self-assembly. Cabinet is characterized by IP20 degree of protection, opening front door with possibility of rotating to 180° with lock, removable side panels (locks included). The cabinet has cable entry panel on top and bottom cover. This product is made of high-grade cold rolled steel.

A mid-sized unit with excellent performance: ROG Strix B760-G Gaming Wi-Fi is a monochrome powerhouse, ready to support your next mATX rig. It has the same high-bandwidth connectivity as its trusted counterpart, but differs with ultrafast DDR5 memory and improved power stages to integrate high-speed processors. The white and silver elements match the ASUS AP201 perfectly, while the back insignia lends a touch of classic Strix style.