Otsing: thermal pad

EK-Quantum Vector N+ RX 6800XT/6900XT is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for SAPPHIRE NITRO+ 6800XT and 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector N+ RX 6800XT/6900XT water block for SAPPHIRE NITRO+ GAMING RX 6800 XT and 6900 XT GPUs EK-Quantum Vector N+ RX 6800XT/6900XT water block is compatible with SAPPHIRE NITRO Radeon RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of durable black POM Acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum N+ Vector RX 6800XT/6900XT D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the N+ 6800XT/6900XT water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 285x149x16.5mm Enclosed EK-Quantum Vector N+ RX 6800XT/6900XT series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)

Stelton termos EM 77 Thermal Jug 1l Brushed Brass

Highly efficient thermal pad with good thermal conductivity and a thickness of 0.5 mm, size of 100 × 100 mm

Product information "KryoSheet - 0.2 mm - 68 x 51 mm" The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity. This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible. Outstanding thermal conductivity Easy to use Consistently high performance Extreme durability Attention: Electrically conductive! Follow instructions! The KryoSheet graphene pads have a molecular structure stacked in the Z-direction. This optimised structure enables outstanding and constant thermal conductivity. This is due to a specially developed manufacturing process in which the hexagonal crystal structure of the graphite is broken up along the basal plane in order to exploit the anisotropy of the graphite's thermal conductivity. However, as a side effect of this complex manufacturing process, the electrical conductivity is also increased and the stability of the KryoSheet pads is affected, so that the pads should only be used according to instructions! KryoSheet is available pre-assembled in various CPU/GPU standard sizes, e.g.: Note: Multiple use of KryoSheet is not recommended! When dismantling the cooler and handling the KryoSheet after use, microcracks may occur in the structure of the graphene pads, which may impair Performance.

The Alphacool ES GPX Copper/Carbon water cooler with backplate was developed for the Alphacool Enterprise Series. Due to the positioning of the connections, the hosing of the cooler in the server rack is significantly simplified. The top of the cooler is made of carbon. This makes the water cooler lighter compared to Alphacool's Eisblocks with acetal or acrylic tops. Thanks to the compact design, only 1 slot is needed to mount the cooler in the server rack instead of 1.5 slots as before. This additional space saving is one more argument for using the ES GPX Copper/Carbon graphics card water cooler. More performance! Alphacool manages to position the cooler as close as possible to the components to be cooled. For this purpose, the heat conducting pads used are reduced to a thickness of 1mm. The maximum possible reduction in the thickness of the copper block and the optimization of the water flow inside the cooler allow all important components such as GPU, voltage converters and VRAMs to be cooled by water much better and more effectively. All of this provides a significant increase in cooling performance. Connections on the back? In order to save space in the width and height during installation, the water input and output have been moved to the back of the cooling block. This positioning of the connections makes hosing much easier. It enables easy integration of the GPU cooler into the water circuit even in the tightest server housings. Copper or aluminum? Alphacool uses only copper for all water-bearing parts. Copper has almost twice the thermal conductivity of aluminum and is therefore clearly the better choice of material for water cooling. The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Thermal paste & thermal pads The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive thermal paste is particularly well suited for high contact pressures, but can still be perfectly applied due to its viscosity of 850000 TF. For the thermal pads, Alphacool uses soft pads that fit perfectly to the components to be cooled and are very durable. The 2mm and 3mm thick pads have a thermal conductivity of 3 W/mk. The 1mm thick pads can dissipate 7 W/mk of heat. Discreet appearance The matte carbon finish gives the cooler a noble appearance. This makes it additionally interesting for private users who want to do without aRGB lighting.   Compatibility: - Gainward GeForce RTX 3080 Ti 12GB Phoenix - Gainward RTX 3080 Phoenix - Gainward RTX 3080 Phoenix GS - Gainward RTX 3090 Phoenix - Gainward RTX 3090 Phoenix GS - INNO3D GEFORCE RTX 3080 TI ICHILL X4 - INNO3D GEFORCE RTX 3080 TI ICHILL FROSTBITE - INNO3D GEFORCE RTX 3080 TI ICHILL X3 - INNO3D GEFORCE RTX 3080 TI X3 - INNO3D GEFORCE RTX 3080 TI X3 OC - Inno3D GeForce RTX 3080 iChill X3/X4 10240 MB GDDR6X - Inno3D GeForce RTX 3080 Twin X2 OC 10240 MB GDDR6X - INNO3D GEFORCE RTX 3080 12GB ICHILL FROSTBITE LHR - INNO3D GEFORCE RTX 3080 12GB X3 OC LHR - INNO3D GEFORCE RTX 3080 12GB ICHILL X3/X4 LHR - INNO3D GEFORCE RTX 3080 12GB ICHILL BLACK LHR - Inno3D GeForce RTX 3090 iChill X3/X4, 24576 MB GDDR6X - Inno3D GeForce RTX 3090 Gaming X3, 24576 MB GDDR6X - Palit GeForce RTX 3080 Ti GamingPro - Palit GeForce RTX™ 3080 GamingPro - Palit GeForce RTX™ 3080 GamingPro OC - Palit GeForce RTX™ 3090 GamingPro - Palit GeForce RTX™ 3090 GamingPro OC - Zotac Gaming GeForce RTX 3080 Ti AMP Holo - Zotac GeForce RTX 3080 Ti AMP HoloBlack - Zotac Gaming GeForce RTX 3080 Ti Trinity - Zotac Gaming GeForce RTX 3080 Ti Trinity OC - Zotac GAMING GeForce RTX 3080 Trinity - Zotac Gaming GeForce RTX 3080 Trinity OC - Zotac GeForce RTX 3090 Trinity, 24576 MB GDDR6X - Galakuro NVIDIA GEFORCE RTX 3080 GG-RTX3080-E10GB/TP - Galakuro NVIDIA GEFORCE RTX 3090 GG-RTX3090-E24GB/TP - Galax GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI - Galax GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI - KFA2 GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI - KFA2 GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI - PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXMPB) - PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXPPB) - PNY GeForce RTX 3090 XLR8 Gaming EPIC-X RGB, 24576 MB GDDR6X   Technical data cooler L x W x H 247,30 x 95,35 x 23,08mm Material cooler chrome-plated copper Material cooler top carbon Threads 2 x G1/4" Thickness cooling fins 0,6mm Maximum working temperature 60 °C Pressure tested 0,8 Bar Technical data backplate L x W x H 237,20 x 95,35 x 6mm Material aluminium Color black

Thermal Grizzly Carbonaut 51x68x0,2

Gelid TP-GP01-B

Wärmeleitpad für Höchstleistungen, 3 mm Stärke, 120 x 20 mm Größe

This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for EVGA® FTW3 RTX 3070 graphics cards based on the latest NVIDIA® Ampere™ architecture. For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator. An EK Water Block for FTW3 RTX 3070 EK-Quantum Vector FTW3 3070 D-RGB water block is compatible with FTW3 RTX 3070 graphics cards. The Vector water block actively cools the GPU, VRAM, power stages, and chokes in the VRM (voltage regulation module). These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The fin array is populated by 28 microfins with 0.6mm wide microchannels that provide optimal cooling performance, without unnecessary flow restrictions or clogging hazards. The base of the block is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of durable POM acetal. These 2nd generation Vector GPU water blocks also feature Acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector FTW3 RTX 3070 D-RGB water block The aesthetic corner end-piece is housing the addressable D-RGB LEDs. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the EK-Quantum Vector FTW3 3070 water block EK recommends the purchase of a retention backplate, especially for the 3070 models of graphics cards. The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, and backside of the printed circuit board VRM section. Technical Specification Dimensions: (LxHxW) - 314x155x21mm Enclosed EK-Quantum Vector FTW3 RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)

Luna 12 LED RedThe Thermaltake Luna 12 LED fan provides efficient, and quiet cooling whether used to pull cool air into the PC system or push hot air out. With precisely balanced fan blades and long life bearing, it guarantees ultra low noise. In total of 3 colors of selection (Red, White and Blue), to add up styles into the PC case.Anti vibration mounting systemIn-mold injection anti-vibration rubber pads provide hassle-free usage 80% protection coverage including all four corners and the frame.Long life bearingLong-life bearing offers better reliability and extends life span.Outstanding performanceDouble curved fan blades designed to provide higher air pressure at low noiseLarger frame opening, higher air inflowEnlarged fan frame opening enhance inflow by 60%. LUNA Fan delivers exceptional airflow at low noise level at 1200 RPM3 color LED to choose fromLuna 12 LED series are available in 3 LED vibrant colors: Red, White and Blue, adding cooling aesthetics to your chassis.Attachment screwedPower Connection 3-Pin-fan connectorPower Input 0 - 1.92 watt(s)Voltage Range 9 - 12 VNumber of Revolutions 0 - 1200 rpmVolume 0 - 20.7 dB(A)Volumetric Flow 0 - 85.7 m3/h, 0 - 50.44 cfmDimensionsFans Fan 1 120 x 120 x 25 mm

Attachment screwedSocketsuitable 1366, 2011, 1356, 2011-3MaterialAluminum YesCooper YesPower Connection PWM fan connectorFan Bearing SSOPower Input 0 - 1.2 watt(s)Voltage Range 0 - 12 VNumber of Revolutions 400 - 2000 rpmVolume 0 - 22.8 dB(A)Volumetric Flow 0 - 78.9 m3/h, 0 - 46.4 cfmDimensionsFans Fan 1 92 x 92 x 25 mmCooler 95 x 110 x 95 mmTotal 95 x 110 x 95 mmWeightCooler 531 gramsFeaturesincluding Thermal Paste/Pad Yes

Elevate your gaming rig with the ASUS ROG STRIX LC III 360 ARGB LCD processor liquid cooling system. Designed for gamers and enthusiasts, this high-performance cooling solution features three 120mm ROG STRIX AF-12S ARGB fans and a 7th Generation Asetek pump, ensuring your CPU stays cool even during intense gaming sessions. The customizable 2.1" Full Color IPS LCD display not only adds a touch of personalization to your setup but also allows for real-time system monitoring, keeping you informed of your system's performance. With ASUS Aura Sync compatibility, synchronize your cooling system's lighting effects with other Aura-enabled components and peripherals to create a cohesive and visually appealing gaming environment. The cooling system's broad compatibility with multiple Intel and AMD sockets ensures it fits seamlessly into your existing or new build. Additionally, the inclusion of anti-vibration rubber pads and 0dB Technology ensures that your gaming experience remains uninterrupted by noise. Installation is made easy with a comprehensive mounting kit, pre-applied thermal compound, and sleeved rubber tubes, allowing you to set up your cooling system with ease. Choose the ASUS ROG STRIX LC III 360 ARGB LCD for a cooling solution that combines performance, aesthetics, and convenience, ensuring your gaming rig stands out.

The NH-U14S is the 14cm top model of Noctua’s classic U-series single tower CPU coolers, which have received more than 400 awards and recommendations from the international press. While the large, six heatpipe design and the NF-A15 140mm fan with PWM support for fully automatic speed control allow the cooler to best the renowned quiet cooling performance of all other U-series coolers, its 52mm slim shape still guarantees full compatibility with tall RAM modules on LGA2011. Topped off with the trusted, pro-grade SecuFirm2™ multi-socket mounting system, Noctua’s proven NT-H1 thermal compound and full 6 years manufacturer’s warranty, the NH-U14S is a complete premium quality solution that combines superb performance, high compatibility and quiet operation.Attachment for ATX-Mainboards, screwedSocketsuitable AM2, AM2+, 1156, AM3, 1155, AM3+, FM1, 2011, 1150, FM2, 2011-3MaterialAluminum YesCooper YesPower Connection PWM fan connectorFan Bearing SSOPower Input 0 - 1.56 watt(s)Voltage Range 0 - 12 VNumber of Revolutions 300 - 1500 rpmVolume 19.2 - 24.6 dB(A)Volumetric Flow 111.5 - 140.2 m3/h, 65.6 - 82.5 cfmDimensionsFans Fan 1 140 x 150 x 25 mmCooler 150 x 165 x 52 mmTotal 150 x 165 x 78 mmWeightCooler 935 gramsFeaturesincluding Thermal Paste/Pad Yes

The NH-U12S chromax.black is an all-black version of Noctua’s award-winning NH-U12S premium-quality quiet CPU cooler. Thanks to the same proven slim-tower heatsink design and NF-F12 PWM fan, it stays true to the NH-U12S’s successful formula of fusing excellent cooling performance with superb quietness of operation and outstanding RAM, case and PCIe compatibility. At the same time, the chromax.black version with its black fan and black coated heatsink combines these assets with a sleek stealth look. Topped off with the renowned SecuFirm2™ multi-socket mounting system, Noctua’s enthusiast-grade NT-H1 thermal compound thermal compound and a full 6-year manufacturer’s warranty, the NH-U12S chromax.black is a premium choice for customers who seek a highly compatible 120mm heatsink that looks just as great as it cools.Award-winning NH-U12S coolerTens of thousands of enthusiast users all over the world swear by the NH-U12S’s quality and performance. Recommended by more than 200 international hardware websites and magazines, it is renowned as being one of the best 120mm coolers on the market.chromax.black designThe NH-U12S chromax.black is black from head to toe: Featuring a black coated heatsink, black fans with black anti-vibration-pads, black fan clips and black mounting parts, it’s right at home in all-black builds and easy to integrate with other colour schemes.Colour-customisableUsing the optional NA-HC1 and NA-HC2 heatsink covers as well as the NA-SAVP1 anti-vibration pads (available in black, blue, green, red, yellow, white), the NH-U12S chromax.black can be fully customised to fit popular build colour schemes such as black and red or black and white.100% RAM compatibilityThanks to its slim design with only 45mm fin depth, the NH-U12S will not overhang the RAM slots even with two fans installed. This gives the user full access to the memory modules on all current CPU sockets and guarantees 100% compatibility with tall heatspreaders or optional memory fans.*Classic 120mm tower size for excellent overall compatibilityStanding 158mm tall, the NH-U12S is short enough to fit most modern mid- or high-end tower cases. Measuring 125mm wide (including fan and fan clips), the cooler stays clear of the top PCIe slot on most standard ATX or Micro-ATX motherboards, ensuring optimum compatibility with multi-GPU setups.NF-F12 120mm Focused Flow™ fanRecommended by more than 150 hardware publications and thousands of enthusiasts world-wide, the Noctua's premium quality NF-F12 Focused Flow™ 120mm fan is renowned to combine superb static pressure, excellent heatsink performance and surprising quietness of operation.PWM support and Low-Noise AdaptorThe NF-F12 120mm fan supplied with the NH-U12S supports PWM for convenient automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 1500 to 1200rpm using the supplied Low-Noise Adaptor for even quieter operation.Anti-vibration pads and fan-clips for second NF-F12 (optional)For users who want to achieve even better performance by adding a second, optional NF-F12 PWM chromax.black.swap fan to create a push/pull setup, the NH-U12S includes fan clips and an extra set of custom-designed anti-vibration pads that allow to off-set the rear fan by 5mm to improve acoustics in dual-fan mode.SecuFirm2™ multi-socket mounting systemNoctua’s SecuFirm2™ mounting systems have become synonymous with quality, safety and easy installation. Supporting Intel LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) and LGA20xx (LGA2066, LGA2011-0, LGA2011-3), as well as AMD AM4, AM3(+), AM2(+), FM2(+) and FM1, the SecuFirm2™ mounting included with the NH-U12S is straightforward to install, provides perfect contact pressure and will stand the test of time even under heavy use.Compatibility with past and future socketsThanks to Noctua’s SecuFirm™ ecosystem, the NH-U12S can be made compatible with the older LGA1366 and LGA775 sockets using the optional NM-I3 mounting kit, which is provided free of charge. If technically possible, Noctua will also provide upgrade kits for future sockets, which makes the NH-U12S a safe long-term investment.NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds.Soldered interface between heatpipes and finsWith many heatsinks, the fins are press-fitted to the heatpipes. Due to the different thermal expansion coefficients of copper and aluminium, this fit can loosen over years of thermal cycling, which may lead to reduced performance. By contrast, the NH-U12S’s fins are soldered to the heatpipes in order to guarantee a superior thermal interface that doesn’t deteriorate even after many years of usage.

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Note regarding shipping: This unit can only be shipped via a forwarding company. As the chipping charges differ by distance an online calculation is not possible. Please provide your full telephone number and E-Mail address when ordering, we will contact you after the order is complete. The shipping charge is approximately 50€ within Germany. Technical specifications: Power: 1/6 HP Power consumption: 150W Cooling capacity: 265W (suitable for extreme OC and cooling) Recommended coolant flow: 600-2200 l/h Weight: 18kg Cooling agent: R134A Dimensions: 448x330x440mm (LxWxH) Connector outside diameter: 18-20mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 1.3 A (50 Hz) current drain: 299 W Scope of Delivery: 1x Waterchiller Hailea Ultra Titan 300 2x 45° angle with rubber seal 2x rubber seal with G1/4" internal thread 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.)

EK-Quantum Vector Strix RTX 3080/3090 Backplate - Nickel is a CNC-milled backplate made of nickel-plated aluminium that fits all EK-Quantum Vector Strix RTX 3070/3080/3090 water blocks. The backplate covers the full length of the graphics card PCB, serves as an aesthetic addition and also provides passive cooling for the back of the voltage regulator module (VRM), the GPU core and the VRAM on the 3090 cards. Enclosed: EK-Quantum Vector Strix RTX 3070/3080/3090 back plate - nickel Assembly mechanism Thermal pads

Wärmeleitpad für Höchstleistungen, 2 mm Stärke, 100 x 100 mm Größe

Leistungsfähiges Wärmeleitpad, 100 x 50 mm, 1,5 mm Stärke, für Kühlung von Prozessoren und Chips

EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUs EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector Strix RX 6800/6900 D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Strix 6800/6900 water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 300.5x157x19.5mm Enclosed EK-Quantum Vector Strix RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)

EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUs EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of durable black POM acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector Strix RX 6800/6900 D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Strix 6800/6900 water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 300.5x157x19.5mm Enclosed EK-Quantum Vector Strix RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)

Thermal Grizzly Minus Pad 8 - 120 × 20 × 1,0 mm, 2 Stück

Lüfterloses Design-Case von Akasa, für den Raspberry Pi 4B, aus Aluminium, Aussparungen für alle wichtigen Anschlüsse, inklusive Kühlblöcke und Thermal-Pads und Wärmeleitpaste

Thermal Grizzly Minus Pad 8 - 30 × 30 × 1,5 mm

The Thermal Grizzly Minus Pad Pro is a highly efficient thermal pad designed for superior heat conductivity. Each pad measures 120 x 20 mm with a thickness of 0.5 mm, making it ideal for various cooling applications. The package includes two pieces, ensuring you have a spare for future use. With a net weight of 0.018 kg, it is lightweight and easy to handle, and it comes with a G24 warranty for added peace of mind.

Very high-performance thermal pad with good thermal conductivity and a thickness of 0.5 mm, size of 100 × 100 mm

Very high-performance thermal pad, with good thermal conductivity and 1.0 mm thickness, size of 120 × 20 mm.

Very high-performance thermal pad with good thermal conductivity and a thickness of 3.0 mm, size of 120 × 20 mm

Thermal Grizzly Carbonaut 32x32x0,2 mm Thermal Grizzly Carbonaut Thermal Pad 32 × 32 × 0.2 MM

Wärmeleitpad für Höchstleistungen, 1,5 mm Stärke, 100 x 100 mm Größe

Thermal Grizzly Minus Pad 8 - 100 × 100 × 1,5 mm

Dimensions: 120 x 20 x 1,5mm Thermal conductivity: 8.0 W/mk Temperature range: -100°C / +250°C Maximum bridgeable gap: 1,5 mm Muu info: Ei juhi elektrit.

Dimensions: 30 x 30 x 2,0mm Thermal conductivity: 8.0 W/mk Temperature range: -100°C / +250°C Maximum bridgeable gap: 2,0 mm Muu info: Ei juhi elektrit.

Wärmeleitpad für Höchstleistungen, 2 mm Stärke, 120 x 20 mm Größe

Effektiver M.2-Kühler für NVMe-SSDs, inkl. 2x Wärmeleitpad, für 2280 M.2 SSDs

Wärmeleitpad für Höchstleistungen, fünf Stärken zwischen 0,5 und 3 mm, 120 x 20 mm Größe

Ehitatud tugevaks, näe seninägematut Maailma esimene 5G termokaameraga vastupidav tahvelarvuti IP68/IP69K, MIL-STD-810H sertifikaat Loodud vallutama karmi keskkonda, Armor Pad 4 Ultra on vastupidav tahvelarvuti, mis ei kohku tolmu, kukkumiste ega karmide ilmastikutingimuste ees. Selle militaar standardile vastav tugevus ja vastupidav kest pakuvad seadmele ületamatut kaitset. Ulefone Defender struktuur kõikehõlmav kaitse Armor Pad 4 Ultra uhkustab ülitugeva üheosalisest kõrgekvaliteetsest plastist valmistatud konstruktsiooniga. See disain tagab vastupidavuse kukkumistele, pragudele ja tugevatele löökidele. Vastupidavuse suurendamiseks on tahvelarvutil tõstetud servad kaamera ja LED-tulede ümber ning spetsiaalselt tugevdatud nurgad lisakaitseks. Tööstusharu juhtiv Termokaamera sensor Tipptasemel tehnoloogia 3x parema jõudlusega Armor Pad 4 Ultra on varustatud tipptasemel ThermoVueTM termokaamera sensoriga. See tipptasemel funktsioon võimaldab näha nähtava spektri piiridest kaugemale, tuvastades täpselt lekkeid ja muid probleeme. Täiustatud töötlus tagab soojusallikate ja temperatuurikõikumiste hõlpsa tuvastamise, pakkudes muljetavaldavalt detailset ja täiustatud termopilti. Professionaalne ja mänguline rakenduse liides Rohkem selgeid detaile suuremal ekraanil ThermoVue rakendus kuvab termopilte, võimaldades teha fotosid, salvestada temperatuuri jälgimise videoid või seadistada ajavahemike salvestusi, et jälgida temperatuuri muutusi aja jooksul. Iga režiim on optimeeritud Armor Pad 4 Ultra suurele ekraanile, pakkudes erakordset selgust ja võimaldades soojusandmeid hõlpsalt analüüsida. 5G võrk laiem, kiirem, nutikam 5G võimekus avab ukse ülikiiretele allalaadimis- ja üleslaadimiskiirustele, ülimadalale latentsusele ja suurele võrgumahule. See tähendab suurte andmefailide vaevatut käsitsemist, reaalajas suhtlemist minimaalse viivitusega, võimalust ühendada palju seadmeid ja tugevat turvalisust - luues hämmastava järgmise põlvkonna töö- ja elamiskogemuse. Võimsus ja sujuvus MediaTek Dimensity 6300 5G kiibistik Armor Pad 4 Ultra tagab tõhusa jõudluse, mis suudab hõlpsasti toime tulla teie igapäevase elutempoga. MediaTek Dimensity 6300 6 nm protsessor, millel on 8-tuumaline CPU ja täiustatud Arm Mali-G57 MC2 GPU, haldab sujuvalt igapäevaseid ülesandeid ja saab hakkama nii kergemate kui ka intensiivsete mängudega. Lisaks tagab tugev 5G-ühendus katkematu voogedastuse, helistamise ja interneti sirvimise. Kompromissitu kiirus ja salvestusruum Kuni 16GB RAM + 256GB ROM Veeda oma päeva ilma tõrgeteta. Armor Pad 4 Ultral on kuni 16GB mälu, mis tagab sujuva töö ja kõrvaldab viivituse. 256GB sisemälu ja 2TB laiendatav salvestusruum annab sulle piisavalt ruumi kõigi rakenduste, fotode, videote ja failide jaoks. 11800mAh massiivne aku Ei mingit aku ärevust Armor Pad 4 Ultra uhkeldab massiivse 11800mAh akuga, mis võimaldab töötada ja nautida meelelahutust tundide kaupa, ilma et peaksid pidevalt laadijat otsima. Lisaks tagab uus aku usaldusväärse töö isegi külmades temperatuurides kuni -30°C. Toetab doki laadimist Lisaks 33W juhtmega kiirlaadimisele pakub Armor Pad 4 Ultra ka juhtmevaba laadimise mugavust. Aseta oma seade lihtsalt dokki ja vaata, kuidas see end koheselt laadima hakkab. Olenemata sellest, kas oled kodus või kontoris, dokk hoiab sinu seadet laetuna ilma juhtmeid vajamata. *Juhtmevaba laadimisdokki müüakse eraldi. Toetab pöördlaadimist Mugav kaasaskantav akupank 10 W pöördlaadimise rakendamine pakub praktilist ja tõhusat võimalust paljude seadmete, nagu kõrvaklapid, iPhone'id, tahvelarvutid ja nutikellad, kiireks laadimiseks, kui seda on kõige rohkem vaja. 10,36-tolline 2K ekraan piirideta selge vaatepilt Laiendatud visuaalid parandavad kasutajakogemust, vähendades liigset kerimist või zoomimist. 10,36-tolline suur 2K ekraan pakub hingematvalt erksaid ja realistlikke pilte, mis on täis keerukaid detaile. 500 nitti loetavus õues Mugav lugemine 500 nitti tippheledusega ekraan tagab, et ekraani on lihtne lugeda ka otsese päikesevalguse või teistes eredalt valgustatud keskkondades. Corning® Gorilla® Glass Kukkumiste, kriimustuste ja kulumise vastu Unusta pragunenud ekraanid ja löödud ekraanid! Armor Pad 4 Ultra kasutab Corning Glassi, mis on vastupidavuse liider, vähendades võimalust, et sinu seade kannatab kukkumiste või löökide all. See on ideaalne kaitse neile, kes nõuavad parimat, eriti siis, kui olud on karmid. Erakordne 32MP esikaamera Armor Pad 4 Ultra uhkeldab kõrge eraldusvõimega 32MP esikaameraga, tagades, et igat detaili jäädvustatakse hämmastava selgusega. Suure horisontaalse ekraani keskosas asuv kaamera on nutikalt paigutatud, et täiustada sinu videokõnede kogemust. 50MP tagakaamera 1/1,31" ülisuur sensor Vabasta oma sisemine fotograaf Armor Pad 4 Ultra uuendusliku 50MP tagakaameraga. Sellel on Samsung ISOCELL GN1 sensor, mis viib su tööpäeva fotod järgmisele tasemele. Iga kord jäädvustatakse kristallselged pildid, tagades, et sinu töödokumentide ja fotode selgus säilib. 1100 luumenit mitmekülgne LED-valgusti Armor Pad 4 Ultra muutub multifunktsionaalseks valgustustööriistaks, asendades taskulambi, pealambi või kaasaskantava matkavalgusti tänu sisseehitatud LED-valgusele. Lihtsa nupuvajutusega või eksklusiivse rakenduse kaudu pääsed kiiresti juurde eredale ja vastupidavale valgusallikale. Kõik-ühes valgustuslahendus Tugeva konstruktsiooniga LED-valgustid on mitmekülgsed välistingimustes kasutamiseks, nagu telkimine, öine kalapüük, matkamine, jalgrattasõit. Olgu tegemist objekti ehituse, avariiremondi, sõiduki hoolduse valgustamise või pereliikmete hädaolukordadega, nagu looduskatastroofid, sisseehitatud valgustid on alati valmis kasutamiseks. Kaks stereo kõlarit ja kõrvaklappideta FM-raadio Kaasahaarav helikogemus Lase end ümbritseda rikkalikust multimeedia kogemusest Armor Pad 4 Ultra kahekordsete sümmeetriliste kõlaritega. Need toodavad valjemat ja selgemat stereoheli, pakkudes täiuslikult tasakaalustatud heli kõigil sagedustel. Naudi oma lemmikfilme, muusikat ja isegi igapäevaseid FM-raadioülekandeid ilma kõrvaklappideta - see on meelelahutus võimendatud. Uusim Android 14 Isiklikum, juurdepääsetavam ja kaitstum Uusima Android 14 toega Armor Pad 4 Ultra pakub sujuvamat, turvalisemat ja kasutajasõbralikumat kogemust. Ole valmis tipptasemel kaamera jõudluseks, põnevateks uuteks teemadeks ja muljetavaldavateks Al-genereeritud taustapilte. Lisaks naudi täiendatud privaatsuse funktsioone, laiemat ligipääsetavuse valikut ja vaevatut seadme kasutamist. Ühendus igal pool 4G LTE ja 5G Sub6 ja 2.4G/5G WiFi Kiired traadita ühendused on kõikjal saadaval. Armor Pad 4 Ultra sisaldab standardina 4G LTE mobiilsideühendust, 5G Sub6 toetust kahele SIM-kaardile ning 2.4GHz ja 5GHz Wi-Fit, et saaksid olla ühendatud ka liikvel olles ning sisule reaalajas hõlpsalt juurde pääseda ja seda värskendada. Mitmeotstarbeline digitaalne tööriistakast Valikulised digitaalsed tööriistad, nagu kompass, plaanimõõtja ja kõrguse mõõtja, lihtsustavad ülesandeid, asendades füüsilised tööriistad. Kodu remondiks tagab Hanging Painting sirged ja tasased maalid, samal ajal kui ehitustöölised saavad kasutada Plumb Bobi, et tagada sirged seinad. Lisaomadused ja funktsioonid Sinu eksklusiivne teeninduskeskus Sinu üldise kogemuse parandamiseks on seadmesse loodud teeninduskeskuse rakendus. Siit leiad lihtsa ligipääsu tugiteenustele, nagu KKK-d, tõrkeotsingu juhendid ja kasutusjuhendid ning saad isegi jätta oma küsimused ja probleemid. See rakendus suudab pakkuda ka tootevärskendusi ja võimaldab ühe klikiga sisseoste teha ja tooteid tellida. Purunematu vastupidavus ja jõudlus Armor Pad 4 Ultra läbib mitmeid rangeid füüsilisi teste. Selle funktsionaalsust ja jõudlust hinnatakse põhjalikult. Tahvelarvuti on valmis taluma kõige karmimaid tingimusi ja tagab usaldusväärse jõudluse nõudlikes keskkondades.

Dimensions: 100 x 100 x 0,5mm Thermal conductivity: 8.0 W/mk Temperature range: -100°C / +250°C Maximum bridgeable gap: 0,5 mm Muu info: Ei juhi elektrit.

Thermal pad "minus pad 8", 120 x 200 x 1mm,

Thermal Grizzly Carbonaut 38x38x0,2 Thermal Grizzly Carbonaut Thermal Pad 38 × 38 × 0.2 MM

Thermal Grizzly Carbonaut Thermal Pad 25 × 25 × 0.2 mm

The NH-L9i is a premium quality quiet CPU cooler for Intel LGA115x based HTPCs and Small Form Factor systems. At a super-low profile of only 37mm, the NH-L9i is ideal for extremely slim cases and due to its 95x95mm footprint, it provides full compatibility with tall RAM modules and VGA cards on mini-ITX mainboards. The custom designed SecuFirm2™ mounting system for LGA115x makes installation a child’s play and thanks to the highly optimised NF-A9x14 premium fan that supports fully automatic speed control via PWM, the NH-L9i runs remarkably quiet. Topped off with Noctua’s renowned NT-H1 thermal compound, the NH-L9i fuses everything users have come to expect from Noctua’s larger coolers into a super-compact package for slim HTPC systems.Caution: The NH-L9i is a highly-compact low-profile quiet cooler designed for use in small form factor cases and HTPC environments. While it provides first rate performance in its class, it is not Suitable for overclocking and should be used with care on CPUs with more than 65W TDP (Thermal Design Power). Please consult our TDP guidelines to find out whether the NH-L9i is recommended for your CPU.Attachment for ATX-Mainboards, screwedSocketsuitable 1156, 1155, 1150MaterialAluminum YesCooper YesPower Connection PWM fan connectorFan Bearing SSOPower Input 0 - 2.52 watt(s)Voltage Range 0 - 12 VNumber of Revolutions 300 - 2500 rpmVolume 0 - 23.6 dB(A)Volumetric Flow 0 - 57.5 m3/h, 0 - 33.8 cfmCabel Length 20 mDimensionsFans Fan 1 92 x 14 x 92 mmCooler 95 x 23 x 95 mmTotal 95 x 37 x 95 mmWeightCooler 420 gramsFeaturesincluding Thermal Paste/Pad YesCooling Performance 65 watt(s)

MPG Z890 CARBON WIFI Support Intel® Core™ Ultra Processors (Series 2) for LGA 1851 socket Supports DDR5 Memory, up to 9200+ MT/s (OC) Ultra Performance: Direct 20+1+1+1 phases power, dual 8-pin CPU power connectors, Core Boost, Memory Boost, 8-layer PCB made by 2oz thickened copper and server-grade level material Frozr Guard: Enlarged heatsink with heat-pipe, MOSFET thermal pads rated for 7W/mk, additional choke thermal pads and M.2 Shield Frozr are built for high performance system and non-stop gaming experience EZ DIY: EZ PCIe Release, EZ M.2 Shield Frozr II, EZ M.2 Clip II and EZ Antenna Lightning Fast Game experience: PCIe 5.0 slot, Lightning Gen 5 M.2 Ultra Connect: Thunderbolt™ 4 and Intel® Killer™ 5G LAN + 2.5G LAN with Wi-Fi 7 Solution - The latest solution for professional and multimedia use, delivering secure, stable, and high-speed networking and data transmission Audio Boost 4: Reward your ears with studio grade sound quality for the most immersive gaming experience